SDD1600

SDD1600 DC Input Quad Optocoupler DESCRIPTION The SDD1600 combines four independent optocouplers in a 16 pin DIP/SMD package. Each of the four optocoupler circuits is composed of an input LED optically-coupled to a Photo Darlington Transistor--allowing for high isolation levels while maintaining low-level DC signal control capability. The SDD1600 provides an optically isolated method of controlling many interface applications such as telecommunications, industrial control and instrumentation circuitry. FEATURES High current transfer ratio High input-to-output isolation package (5000 Vrms) Compact dual-in-line package APPLICATIONS System appliances, measuring instruments Industrial robots Copiers, automated vending machines Signal transmission between varying circuits Telephone sets Fax machines Interface with various power supply circuits Numerical control machines OPTIONS/SUFFIXES -S -TR Surface Mount Option Tape and Reel Option MAXIMUM RATINGS PARAMETER Storage Temperature Operating Temperature Continuous Forward Current Peak Forward Current 1, 3, 5 & 7: Anode 2, 4, 6 & 8: Cathode 9, 11, 13, 15: Emitter 10, 12, 14 &16: Collector UNIT °C °C mA A V mW MIN -55 -40 TYP MAX 125 100 50 1 6 200 SCHEMATIC DIAGRAM Reverse Voltage Output Power Dissipation APPROVALS UL and C-UL Approved, File #E201932 rev 1.0 Solid State Optronics, Inc. 1.888.377.4776 www.ssousa.com SDD1600 DC Input Optocoupler ELECTRICAL CHARACTERISTICS - 25° PARAMETER INPUT SPECIFICATIONS LED Forward Voltage Reverse Current Terminal Capacitance V A pF 30 1.2 1.4 10 If = 20mA Vr=4V V=0, f=1kHz UNIT MIN TYP MAX TEST CONDITIONS OUTPUT SPECIFICATIONS Collector-Emitter Breakdown Voltage Emitter-Collector Voltage Dark Current Floating Capacitance Saturation Voltage Current Transfer Ratio Rise Time Fall Time V V A pF V % s s 600 60 50 0.6 300 0.1 1 1 1.5 9000 Ic = 10uA Ie = 10uA Vce = 200V, If=0 Vce = 0V, f=1.0MHz If = 20mA, Ic = 5mA If = 1mA, Vce = 2V Ic = 20mA, Vce = 2V, Rc = 100 ohms Ic = 20mA, Vce = 2V, Rc = 100 ohms COUPLED SPECIFICATIONS Isolation Voltage Isolation Resistance Cut off Frequency V G kH z 5000 50 7 Ic = 2mA, Vcc = 5V, Rc = 100 ohms T = 1 minute rev 1.0 Solid State Optronics, Inc. 1.888.377.4776 www.ssousa.com SDD1600 Fig.1 Current Transfer Ratio vs. Forward Current Collector Power Dissipation Pc (mW) Forward Current IF (mA) Fig.2 Collector Power Dissipation vs. Ambient Temperature Current transfer ratio CTR (%) Ambient Temperature Ta (°C) Fig.3 Collector Dark Current vs. Ambient Temperature Fig.4 Forward Current vs. Ambient Temperature Fig.5 Forward Current vs. Forward Voltage Collector Dark Current Iceo (A) Forward Current IF (mA) Ambient Temperature Ta (°C) Ambient Temperature Ta (°C) Forward Current IF (mA) Forward Voltage VF (V) Fig.6 Collector Current vs. Collectoremitter Voltage Fig.7 Relative Current Transfer Ratio vs. Ambient Temperature Collector-emitter Saturation Voltage Vce (V) Ambient Temperature Ta (°C) Fig.8 Collector-emitter Saturation Voltage vs. Forward Current Collector-emitter Voltage VCE (V) Relative Current Transfer Ratio (%) Collector Current Ic (mA) Forward Current IF (mA) Fig.9 Response Time vs. Load Resistance Response Rise Time (us) Load Resistance RL (K ohm) rev 1.0 Solid State Optronics, Inc. 1.888.377.4776 www.ssousa.com SDD1600 DC Input Quad Optocoupler MECHANICAL DIMENSIONS 16 PIN DUAL IN-LINE PACKAGE 16 PIN SURFACE MOUNT DEVICE END VIEW END VIEW TOP VIEW TOP VIEW rev 1.0 Solid State Optronics, Inc. 1.888.377.4776 www.ssousa.com