SST12LN01-QU6F

2.4-2.5 GHz Low-Noise Amplifier SST12LN01 SST12L012.4-2.5 GHz Low-Noise Amplifier Preliminary Specifications FEATURES: • • • • • • • Suitable Gain: – Typically 12-13 dB gain across 2.4–2.5 GHz Low Noise Figure: – 1.2-1.5 dB across 2.4–2.5 GHz IIP3: – 3 dBm across 2.4–2.5 GHz Low Current Consumption – 12 mA across 2.4–2.5 GHz 50Ω Input/Output Matched Packages available – 16-contact UQFN – 3 mm x 1.6 mm All non-Pb (lead-free) devices are RoHS compliant APPLICATIONS: • WLAN • Bluetooth • Wireless Network PRODUCT DESCRIPTION The SST12LN01 is a cost effective Low Noise Amplifier (LNA) which does not require external RF-matching components on PCB applications. This device is based on the 0.5µm GaAs PHEMT technology, and complies with 802.11 b/g applications. SST12LN01 provides high-performance, low-noise, and mild-gain operations within the 2.4–2.5 GHz frequency band. Across this frequency band, this device typically provides 12-13 dB gain. This LNA cell is equipped with a self DC-biasing scheme, which helps keep the DC consumption very low during operation. A pair of singled-ended, input and output ports is assigned to the LNA cell with a 50 RF match. The SST12LN01 is offered in a 6-contact UQFN package. See Figure 2 for pin assignments and Table 1 for pin descriptions. © 2006 Silicon Storage Technology, Inc. S71329-00-000 9/06 1 The SST logo and SuperFlash are registered Trademarks of Silicon Storage Technology, Inc. These specifications are subject to change without notice. 2.4-2.5 GHz Low-Noise Amplifier SST12LN01 Preliminary Specifications FUNCTIONAL BLOCKS 1 2 3 LNA 6 5 4 1329 F1.0 FIGURE 1: Functional Block Diagram ©2006 Silicon Storage Technology, Inc. S71329-00-000 9/06 2 2.4-2.5 GHz Low-Noise Amplifier SST12LN01 Preliminary Specifications PIN ASSIGNMENTS Top View (contacts facing down) VDD NC RFIN 1 2 3 NC 1329 6-uqfn P1.0 6 RF and DC GND 0 5 4 RFOUT NC FIGURE 2: Pin Assignments for 16-contact UQFN PIN DESCRIPTIONS TABLE 1: Pin Description Symbol GND NC RFIN NC NC RFOUT VDD Pin No. 0 1 2 3 4 5 6 Power Supply No Connection No Connection O PWR T1.0 1329 Pin Name Ground No Connection Type1 Function Unconnected pin I 2.4G RF input Unconnected pin Unconnected pin 2.4G RF output 1. I=Input, O=Output ©2006 Silicon Storage Technology, Inc. S71329-00-000 9/06 3 2.4-2.5 GHz Low-Noise Amplifier SST12LN01 Preliminary Specifications ELECTRICAL SPECIFICATIONS The AC and DC specifications for the power amplifier interface signals. Refer to Table 2 for the DC voltage and current specifications. Refer to Figure 3 for the RF performance. Absolute Maximum Stress Ratings (Applied conditions greater than those listed under “Absolute Maximum Stress Ratings” may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these conditions or conditions greater than those defined in the operational sections of this data sheet is not implied. Exposure to absolute maximum stress rating conditions may affect device reliability.) Input power to pin 2 (PIN) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +5 dBm Average output power (POUT)1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .-15 dBm Supply Voltage at pin 6 (VDD). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.3V to +3.5V DC supply current (ICC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 mA Operating Temperature (TA) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -40ºC to +85ºC Storage Temperature (TSTG) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -40ºC to +120ºC Maximum Junction Temperature (TJ) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +150ºC Surface Mount Solder Reflow Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260°C for 10 seconds 1. Never measure with CW source. Pulsed single-tone source with