1201W Series
Bi-color Type (3.0 X 2.5 mm)
Features
Package
Bi-color Type (3.0 X 2.5 mm), Milky White resin
Product features
Outer Dimension 3.0 x 2.5 x 1.4mm ( L x W x H )
Temperature range
Storage Temperature
: -40℃~100℃
Operating Temperature : -30℃~85℃
Lead–free soldering compatible
RoHS compliant
Dominant wavelength
Green
Yellow Green
Red
: 558nm(BG),567nm(PG)
: 572nm(PY)
: 647nm(BR)
Half Intensity Angle
BG,PG,PY
BR
:θx = 156 deg., θy =149 deg.
:θx = 160 deg., θy =150 deg.
Die materials
BG,PG,PY : GaP,
Assembly method
Auto pick & place machine (Auto Mounter)
Soldering methods
Reflow soldering and manual soldering
Taping and reel
2,500pcs per reel in a 8mm width tape. (Standard)
Reel diameter:φ180mm
ESD
BR : GaAlAs
More than 2kV (HBM)
Recommended Applications
Communication Machine, Electric Household Appliances, OA/FA, Other General Applications
2007.8.31
Page 1
1201W Series
Bi-color Type (3.0 X 2.5 mm)
Color and Luminous Intensity
Part No.
Die Name
Material
(Ta=25℃)
Emitted
Color
BG
GaP
Green
BR
GaAlAs
Red
PG
GaP
Green
BR
GaAlAs
Red
PY
GaP
Yellow
Green
BR
GaAlAs
Red
BRBG1201W
BRPG1201W
BRPY1201W
2007.2.5
Lens
Color
Dominant
Wavelength
Luminous Intensity
λd (nm)
Iv (mcd)
TYP.
IF
MIN.
TYP.
IF
Water
Clear
558
20
0.7
2
20
647
20
1.6
12.8
20
Water
Clear
567
20
1.2
4.8
20
647
20
1.6
12.8
20
Water
Clear
572
20
1.4
8
20
647
20
1.6
12.8
20
Page 2
1201W Series
Bi-color Type (3.0 X 2.5 mm)
Absolute Maximum Ratings
Item
Symbol
Power Dissipation
Forward Current
(Ta=25℃)
Absolute Maximum Ratings
Unit
BG
PG
PY
BR
Pd
75
75
75
75
mW
IF
30
30
30
30
mA
IFRM
70
70
70
70
mA
⊿IF
0.42
0.42
0.42
0.42
mA/℃
⊿IFRM
0.93
0.93
0.93
0.93
mA/℃
Reverse Voltage
VR
4
4
4
4
V
Operating
Temperature
T opr
-30~+ 85
℃
Storage Temperature
Tstg
-40~+ 100
℃
Pulse Forward
Current
※1
Derating
(Ta=25℃ or higher)
※1 IFRMMeasurement condition : Pulse Width≦1ms., Duty≦1/20.
※ The ratings specified above are under the condition that only one diode is lit.
50% Max. of each rating shall be applied when two diodes are lit simultaneously.
2007.8.31
Page 3
1201W Series
Bi-color Type (3.0 X 2.5 mm)
Electro-Optical Characteristics
Item
Forward Voltage
Conditions
IF=20mA
(Ta=25℃)
Characteristics
Symbol
BG
PG
PY
BR
TYP.
2.1
2.1
2.1
1.7
MAX.
2.5
2.5
2.5
2.0
VF
Unit
V
Reverse Current
VR =4V
IR
MAX.
100
100
100
100
μA
Peak Wavelength
IF=20mA
λp
TYP.
555
560
570
660
nm
IF=20mA
λd
TYP.
558
567
572
647
nm
IF=20mA
⊿λ
TYP.
30
30
30
30
nm
IF=20mA
2θ1/2
TYP.
Dominant
Wavelength
Spectral Line Half
Width
156(θx) 156(θx) 156(θx) 160(θx)
Half Intensity Angle
deg.
149(θy) 149(θy) 149(θy) 150(θy)
2005.8.26
Page 4
1201W Series
Bi-color Type (3.0 X 2.5 mm)
Technical Data(BRBG)
Spectral Distribution
Spatial Distribution Example
Relative Intensity vs. Wavelength
Condition : Ta = 25℃, IF = 20mA
Relative Intensity
Condition : Ta = 25℃
Wavelength [nm]
Forward Voltage vs. Forward Current
Forward Current vs. Relative Intensity
Forward Voltage VF(V)
2005.8.26
Condition : Ta = 25℃
Relative Intensity
Forward Current IF(mA)
Condition : Ta = 25℃
Forward Current IF(mA)
Page 5
1201W Series
Bi-color Type (3.0 X 2.5 mm)
Technical Data(BRBG)
Derating
Ambient Temperature vs. Relative Intensity
Condition : IF=20mA
Relative Intensity
Maximum Forward Current : IF MAX. (mA)
Ambient Temperature vs. Maximum Forward Current
Repetition Frequency : f ≧ 50Hz
Ambient Temperature : Ta(℃)
Ambient Temperature : Ta(℃)
Power Dissipation vs. Ambient Temperature
Pulse Width vs. Maximum Tolerable Peak Current
IF peak Max./IF DC MAX.
Power Dissipation : Pd (mW)
Condition : Ta = 25℃
Ambient Temperature : Ta(℃)
2005.8.26
Pulse Width : tw (μs)
Page 6
1201W Series
Bi-color Type (3.0 X 2.5 mm)
Technical Data(BRPG)
Spectral Distribution
Spatial Distribution Example
Relative Intensity vs. Wavelength
Condition : Ta = 25℃, IF = 20mA
Relative Intensity
Condition : Ta = 25℃
Wavelength [nm]
Forward Voltage vs. Forward Current
Forward Current vs. Relative Intensity
Forward Voltage VF(V)
2005.8.26
Condition : Ta = 25℃
Relative Intensity
Forward Current IF(mA)
Condition : Ta = 25℃
Forward Current IF(mA)
Page 7
1201W Series
Bi-color Type (3.0 X 2.5 mm)
Technical Data(BRPG)
Derating
Ambient Temperature vs. Relative Intensity
Condition : IF=20mA
Relative Intensity
Maximum Forward Current : IF MAX. (mA)
Ambient Temperature vs. Maximum Forward Current
Repetition Frequency : f ≧ 50Hz
Ambient Temperature : Ta(℃)
Ambient Temperature : Ta(℃)
Power Dissipation vs. Ambient Temperature
Pulse Width vs. Maximum Tolerable Peak Current
IF peak Max./IF DC MAX.
Power Dissipation : Pd (mW)
Condition : Ta = 25℃
Ambient Temperature : Ta(℃)
2005.8.26
Pulse Width : tw (μs)
Page 8
1201W Series
Bi-color Type (3.0 X 2.5 mm)
Technical Data(BRPY)
Spectral Distribution
Spatial Distribution Example
Relative Intensity vs. Wavelength
Condition : Ta = 25℃, IF = 20mA
Relative Intensity
Condition : Ta = 25℃
Wavelength [nm]
Forward Voltage vs. Forward Current
Forward Current vs. Relative Intensity
Forward Voltage VF(V)
2005.8.26
Condition : Ta = 25℃
Relative Intensity
Forward Current IF(mA)
Condition : Ta = 25℃
Forward Current IF(mA)
Page 9
1201W Series
Bi-color Type (3.0 X 2.5 mm)
Technical Data(BRPY)
Derating
Ambient Temperature vs. Relative Intensity
Condition : IF=20mA
Relative Intensity
Maximum Forward Current : IF MAX. (mA)
Ambient Temperature vs. Maximum Forward Current
Repetition Frequency : f ≧ 50Hz
Ambient Temperature : Ta(℃)
Ambient Temperature : Ta(℃)
Power Dissipation vs. Ambient Temperature
Pulse Width vs. Maximum Tolerable Peak Current
IF peak Max./IF DC MAX.
Power Dissipation : Pd (mW)
Condition : Ta = 25℃
Ambient Temperature : Ta(℃)
2005.8.26
Pulse Width : tw (μs)
Page 10
1201W Series
Bi-color Type (3.0 X 2.5 mm)
Package Dimensions
(Unit: mm)
Weight: (13.0)mg
Recommended Soldering Pattern
Taping Specification
(Unit: mm)
(Unit: mm)
Quantity : 2,500pcs/ reel (standard)
2007.10.12
Page 11
1201W Series
Bi-color Type (3.0 X 2.5 mm)
Reflow Soldering Conditions
1) The above profile temperature gives the maximum temperature of the LED resin surface.
Please set the temperature so as to avoid exceeding this range.
2) Total times of reflow soldering process shall be no more than 2 times.
When the second reflow soldering process is performed, intervals between the first
and second reflow should be short as possible (while allowing some time for the
component to return to normal temperature after the first reflow) in order to prevent the
LED from absorbing moisture.
3) Temperature fluctuation to the LED during the pre-heating process shall be minimized.
Manual Soldering Conditions
Iron tip temp.
Soldering time and frequency
2010.7.31
350 ℃
3 s
1 time
(MAX.)
(MAX.)
(MAX.)
Page 12
1201W Series
Bi-color Type (3.0 X 2.5 mm)
Reliability Testing Result
Reliability Testing
Result
Room Temp.
Operating Life
Applicable Standard
EIAJ ED4701/100(101)
Resistance to
Soldering Heat
EIAJ ED4701/300(301)
Temperature Cycling
EIAJ ED4701/100(105)
Wet High Temp.
Storage Life
High Temp.
Storage Life
Low Temp.
Storage Life
Vibration,
Variable Frequency
EIAJ ED4701/100(103)
EIAJ ED4701/200(201)
EIAJ ED4701/200(202)
EIAJ ED4701/400(403)
Testing Conditions
Duration
Ta = 25℃, IF = Maxium Rated Current
Failure
1,000 h
0/25
Twice
0/25
5 cycles
0/25
Ta = 60±2℃, RH = 90±5%
1,000 h
0/25
Ta = Maximum Rated Storage Temperature
1,000 h
0/25
Ta = Minimum Rated Storage Temperature
1,000 h
0/25
2h
0/10
Pre-heating : 150~180℃ 120s Max.
Operation Heating : 230℃ 40s Max.
Peak Temperature : 260℃
Minimum Rated Storage Temperature(30min)
~Normal Temperature(15min)
~Maximum Rated Storage Temperature(30min)
~Normal Temperature(15min)
2
98.1m/s (10G), 100 ~ 2KHz sweep for 20min.,
XYZ each direction
Failure Criteria
Items
Symbols
Luminous Intensity
Iv
Forward Voltage
VF
Reverse Current
IR
Cosmetic Appearance
-
2007.8.31
Conditions
IF Value of each product
Luminous Intensity
IF Value of each product
Forward Voltage
VR = Maximum Rated
Reverse Voltage V
-
Failure criteria
Testing Min. Value < Spec. Min. Value x 0.5
Testing Max. Value ≧ Spec. Max. Value x 1.2
Testing Max. Value ≧ Spec. Max. Value x 2.5
Occurrence of notable decoloration,
deformation and cracking
Page 13
1201W Series
Bi-color Type (3.0 X 2.5 mm)
Special Notice to Customers Using the Products and
Technical Information Shown in This Data Sheet
1) The technical information shown in the data sheets are limited to the typical characteristics and circuit
examples of the referenced products. It does not constitute the warranting of industrial property nor the
granting of any license.
2) For the purpose of product improvement, the specifications, characteristics and technical data described in
the data sheets are subject to change without prior notice. Therefore it is recommended that the most
updated specifications be used in your design.
3) When using the products described in the data sheets, please adhere to the maximum ratings for operating
voltage, heat dissipation characteristics, and other precautions for use. We are not responsible for any
damage which may occur if these specifications are exceeded.
4) The products that have been described to this catalog are manufactured so that they will be used for the
electrical instrument of the benchmark (OA equipment, telecommunications equipment, AV machine, home
appliance and measuring instrument).
The application of aircrafts, space borne application, transportation equipment, medical equipment and
nuclear power control equipment, etc. needs a high reliability and safety, and the breakdown and the wrong
operation might influence the life or the human body. Please consult us beforehand if you plan to use our
product for the usages of aircrafts, space borne application, transportation equipment, medical equipment
and nuclear power control equipment, etc. except OA equipment, telecommunications equipment, AV
machine, home appliance and measuring instrument.
5) In order to export the products or technologies described in this data sheet which are under the
“Foreign Exchange and Foreign Trade Control Law,” it is necessary to first obtain an export permit from the
Japanese government.
6) No part of this data sheet may be reprinted or reproduced without prior written permission from Stanley
Electric Co., Ltd.
7) The most updated edition of this data sheet can be obtained from the address below:
http://www.stanley-components.com
2007.8.31
Page 14