1105W Series
Single Color Dome Lens Type
(High Reliability type, V-Series)
Product features
3216 fixed lens type, Water clear epoxy
Package
Product features
・Outer Dimension 3.2 x 1.6 x 1.85mm( L x W x H )
・Wide operation temperature range.
Storage Temperature : InGaN : -40℃～110℃
: AlGaInP : -40℃～120℃
Operating Temperature : -40℃～100℃ Operation Guarantee
・Ramification of luminosity group sorting. It is possible to have a
uniform transmission with little irregularities even when several are
lined up.
・Systematization of luminosity groups and color tone groups.
Unified to a simple standard.
・Corresponding to a use requiring high reliability in cars etc...
・Surface Mount Type and Reverse Mount Type are possible.
・Shape resin into a lens to make high luminosity possible.
・Lead–free soldering compatible
・RoHS compliant
Dominant wavelength
Blue
Green
Yellow Green
Yellow
Orange
Red
Spatial distribution
VUB,VUG：20deg. VYBG,VYPY,VFY,VFA,VFV,VFR：40 deg.
Die materials
VUB,VUG : InGaN
VYBG, VYPY, VFY, VFA, VFV, VFR :AlGaInP
Optical efficiency
VUB : 10.9lm/W
VYBG : 1.3lm/W
VFY : 11.8lm/W
VFV : 13.2lm/W
VUG : 23.6lm/W
VYPY : 4.8lm/W
VFA : 11.8lm/W
VFR : 11.8lm/W
Rank grouping parameter
Sorted by luminous intensity and wavelength and taped according
to rank.
Assembly methods (customer)
Corresponding to surface mounter.
Soldering methods
Corresponding to reflow soldering and manual soldering.
Taping dimensions
2,000pcs(standard) per reel in a 8mm width tape.
Reel diameter : φ180mm
ESD
AlGaInP:2kV (HBM)
:
:
:
:
:
:
470nm (VUB)
530nm (VUG) , 562nm(VYBG)
572nm (VYPY)
590nm (VFY)
605nm (VFA)
615nm (VFV) , 626nm (VFR)
InGaN:1kV (HBM)
Recommended Applications
SW lighting for car indicators, meter panel, car audio and heater control, etc…
2007.8.31
Page 1
1105W Series
Single Color Dome Lens Type
(High Reliability type, V-Series)
Color Variations and Luminous Intensity
Part No.
Material
Emitted
Color
VUB1105W
InGaN
VUG1105W
InGaN
VYBG1105W
AlGaInP
VYPY1105W
AlGaInP
Yellow
Green
VFY1105W
AlGaInP
Yellow
VFA1105W
AlGaInP
Orange
VFV1105W
AlGaInP
Lens
Color
Blue
(Ta=25℃)
Dominant
Wavelength
Luminous Intensity
Luminous Flux
λd (nm)
Iv (mcd)
φv(mlm)
TYP.
IF
MIN.
MAX.
IF
TYP.
IF
470
10
120
470
10
350
10
530
10
560
2,200
10
780
10
562
20
39
150
20
55
20
572
20
100
390
20
200
20
590
20
330
1,200
20
450
20
605
20
330
1,200
20
450
20
615
20
560
820
20
500
20
626
20
330
1,200
20
450
20
Green
Water
Clear
Red
VFR1105W
AlGaInP
※Note : The luminous intensity(Iv) and dominant wavelength (λd) above are the setup
values of the sorting machine.
(Tolerance : IV… ±10%, λd ... ±1nm)
2006.3.31
Page 2
1105W Series
Single Color Dome Lens Type
(High Reliability type, V-Series)
Absolute Maximum Ratings
Item
Symbol
Power Dissipation
Forward Current
Pulse Forward
Current ※ 1
Derating
(Ta=75℃ or higher)
(Ta=25℃)
Absolute Maximum Ratings
Unit
VUB
VUG
VYBG
VYPY
VFY
VFA
VFV
VFR
Pd
84
84
81
81
78
78
78
78
mW
IF
20
20
30
30
30
30
30
30
mA
IFRM
48
48
100
100
100
100
100
100
mA
⊿ IF
0.40※ 2 0.40※ 2
1.0
1.0
1.0
1.0
1.0
1.0
mA/℃
⊿ IFRM
0.96※ 2 0.96※ 2
3.33
3.33
3.33
3.33
3.33
3.33
mA/℃
5
5
5
5
5
5
V
Reverse Voltage
VR
Operating
Temperature
Topr
Storage Temperature
Tstg
5
5
℃
-40～ +100
-40～ +110
℃
-40～+120
※1 IFRM Measurement condition : Pulse Width ≦1ms., Duty ≦ 1/20.
※2 Temperature Condition: Ta=60℃ or higher.
Thermal Characteristics
Item
Symbol
Junction Temperature
(MAX.)
Thermal Resistance
(TYP.)
Ratings
Unit
VUB
VUG
VYBG
VYPY
VFY
VFA
VFV
VFR
Tj
110
110
120
120
120
120
120
120
℃
R(th j-a)
600
600
700
650
650
650
650
650
℃ /W
R(th j-s)
400
400
500
450
450
450
450
450
℃ /W
(Junction/ ambient)
Thermal Resistance
(TYP.)
(Junction/ Solder Point)
※Rth(j-a) Measurement Condition / Substrate: FR4(t=1.6mm) Pattern Size: 16mm .
2
2009.3.27
Page 3
1105W Series
Single Color Dome Lens Type
(High Reliability type, V-Series)
Electro-Optical Characteristics （VUB,VUG)
Item
Characteristic
Ratings
Symbol
Conditions
Forward Voltage
IF=10mA
(Ta=25℃)
Unit
VUB
VUG
TYP.
3.3
3.3
MAX.
3.8
3.8
VF
V
Reverse Current
VR =5V
IR
MAX.
100
100
μA
Peak Wavelength
IF=10mA
λp
TYP.
465
522
nm
IF=10mA
λd
TYP.
470
530
nm
IF=10mA
⊿λ
TYP.
26
35
nm
IF=10mA
2θ1/2
TYP.
20
20
deg.
Dominant
Wavelength
Spectral Line Half
Width
Half Intensity Angle
※Note: The dominant wave length (λd) above is the setup value of the sorting machine.
（Tolerance : λd…±1nm）
Electro-Optical Characteristics（VYBG, VYPY, VFY, VFA, VFV, VFR)
Item
Forward Voltage
Conditions
IF=20mA
(Ta=25℃)
Characteristic Rating
Symbol
VYBG
VYPY
VFY
VFA
VFV
VFR
TYP.
2.1
2.1
1.9
1.9
1.9
1.9
MAX.
2.5
2.5
2.4
2.4
2.4
2.4
VF
Unit
V
Reverse Current
VR =5V
IR
MAX.
100
100
100
100
100
100
μA
Peak Wavelength
IF=20mA
λp
TYP.
565
575
592
609
624
635
nm
IF=20mA
λd
TYP.
562
572
590
605
615
626
nm
IF=20mA
⊿λ
TYP.
15
15
15
15
15
15
nm
IF=20mA
2θ1/2
TYP.
40
40
40
40
40
40
deg.
Dominant
Wavelength
Spectral Line Half
Width
Half Intensity Angle
※Note: The dominant wave length (λd) above is the setup value of the sorting machine.
（Tolerance : λd…±1nm）
2006.3.31
Page 4
1105W Series
Single Color Dome Lens Type
(High Reliability type, V-Series)
Luminous Intensity Rank
(Ta=25℃)
Standard Chart（Unit: mcd）
Rank
B5
B6
B7
B8
B9
BX
BY
BZ
C1
C2
C3
C4
C5
C6
C7
C8
C9
CX
CY
CZ
D1
D2
D3
D4
D5
D6
D7
D8
D9
IV（mcd）
MIN.
22
27
33
39
47
56
68
82
100
120
150
180
220
270
330
390
470
560
680
820
1,000
1,200
1,500
1,800
2,200
2,700
3,300
3,900
4,700
MAX.
27
33
39
47
56
68
82
100
120
150
180
220
270
330
390
470
560
680
820
1,000
1,200
1,500
1,800
2,200
2,700
3,300
3,900
4,700
5,600
VUB VUG VYBG VYPY
VFY
VFA
IF=10mA
IF=20mA
VFV
VFR
B8
C1
C2
C2
C7
C7
C7
C7
C8
CX
CX
D1
D1
D1
D3
D4
※Limited width of luminous intensity rank is from Min.4 rank width.
2006.3.31
Page 5
1105W Series
Single Color Dome Lens Type
(High Reliability type, V-Series)
Color Tone Groups (λd)
(Ta=25℃)
( unit: nm )
Tolerance: +/-1nm
450nm
VUB Type
470nm
500nm
VUG Type
530nm
VUB Type (IF=10mA)
A
B
MIN.
460.0
464.0
MAX. 464.0
468.0
C
468.0
472.0
D
472.0
476.0
VUG Type (IF=10mA)
A
B
MIN.
515.0
520.0
MAX. 520.0
525.0
C
525.0
530.0
D
530.0
535.0
VYBG Type (IF=20mA)
B
C
MIN.
555.0
558.0
MAX. 558.0
561.0
D
561.0
564.0
VYPY Type (IF=20mA)
A
B
MIN.
567.0
570.0
MAX. 570.0
573.0
C
573.0
576.0
VFY Type (IF=20mA)
C
D
MIN.
583.0
586.0
MAX. 586.0
589.0
E
589.0
592.0
F
592.0
595.0
VFA Type (IF=20mA)
A
B
MIN.
597.0
600.0
MAX. 600.0
603.0
C
603.0
606.0
D
606.0
609.0
VFV Type (IF=20mA)
B
C
MIN.
613.0
616.0
MAX. 616.0
619.0
D
619.0
622.0
VFR Type (IF=20mA)
A
B
MIN.
620.0
626.0
MAX. 626.0
632.0
C
632.0
638.0
550nm
VYBG Type
562nm
VYPY Type
572nm
VFY Type
590nm
600nm
VFA Type
605nm
VFV Type
615nm
VFR Type
626nm
650nm
※Limited width of color tone rank is from Min.3 to Min.4 rank width.
(It changes with product.)
2008.9.12
Page 6
1105W Series
Single Color Dome Lens Type
(High Reliability type, V-Series)
Characteristics Chart （VUB,VUG)
Spectral Distribution
Spatial Distribution Example
Relative Intensity vs. Wavelength
Condition:IF=10mA
1.2
VUB
Ta=25℃
X-direction
VUG
Condition: Ta=25℃
Relative Intensity
1.0
0
30
30
0.8
0.6
60
60
50
0.4
0.2
90
90
0.0
400
450
500
550
600
Wavelength[nm]
Forward Voltage vs. Forward Current
Forward Current vs. Relative Intensity
Condition: Ta=25℃
100
Condition: Ta=25℃
2.0
Relative Intensity
Forward Current I F (mA)
1.5
VUB,VUG
10
VUB,VUG
1.0
0.5
0.0
1
2.5
3.0
3.5
Forward Voltage : VF(V)
2005.11.14
4.0
0
5
10
15
20
Forward Current : IF (mA)
Page 7
1105W Series
Single Color Dome Lens Type
(High Reliability type, V-Series)
Characteristics Chart （VUB,VUG)
Ambient Temp. vs. Relative Intensity
Derating
Ambient Temperature vs. Maximum Forward Current
Repeatition Frequency ： f≧ 50Hz
Maximum Forward Current : I F MAX. (mA)
Condition:IF=10mA
10.0
60
Duty=5%
50
Relative Intensity
Duty=10%
40
Duty=20%
30
Duty=50%
DC
20
VUB
1.0
VUG
10
0
-40
10
60
110
0.1
- 40
- 20
0
Ambient Temperature : Ta (℃)
20
40
60
80
100
Ambient Temp. : Ta (℃ )
Pulse Width vs. Maximum Tolerable Peak Current
Dynamic Drive Rating
Duty cycle vs. Maximum Forward Current
Ambient Temp. : Ta=25℃
10
IF Peak MAX./IF DC MAX.
Maximum Forward Current : IF MAX.(mA)
100
10
10kHz
1kHz
100Hz
50Hz
1
1
1
10
Duty (%)
2004.06.25
2.4
100
1
10
100
1000
10000
100000
Pulse Width : tw (μs )
Page 8
1105W Series
Single Color Dome Lens Type
(High Reliability type, V-Series)
Characteristics Chart（VYBG,VYPY)
Spectral Distribution
Spatial Distribution Example
Relative Intensity vs. wavelength
Condition:IF=20mA
Ta=25℃
1.2
X-direction
VYBG
Condition: Ta=25℃
VYPY
VYBG
Relative Intensity
1.0
VYPY
0
30
30
0.8
0.6
50
60
60
0.4
0.2
90
90
0.0
520
540
560
580
600
620
Wavelength[nm]
Forward Voltage vs. Forward Current
Condition: Ta=25℃
Condition: Ta=25℃
1.5
Relative Intensity
100
Forward Current I F (mA)
Forward Current vs. Relative Intensity
1.0
10
VYPY
VYBG
VYPY
0.5
VYPY
VYBG
1
0.0
1.8
1.9
2.0
2.1
2.2
2.3
Forward Voltage : VF(V)
2005.11.25
VYBG
2.4
2.5
0
5
10
15
20
25
30
Forward Current : IF (mA)
Page 9
1105W Series
Single Color Dome Lens Type
(High Reliability type, V-Series)
Characteristics Chart（VYBG,VYPY)
Derating
Ambient Temp. vs. Relative Intensity
Ambient Temp. vs. Maximum Forward Current
Repetition Frequency：f ≧ 50Hz
Condition:IF=20mA
10.0
Duty=5%
100
80
Duty=10%
60
Duty=20%
Relative Intensity
Maximum Forward Current : I F MAX. (mA)
120
Duty=50%
1.0
VYBG
40
DC
VYPY
20
0.1
0
-40
-20
0
20
40
60
80
100
120
-40
-20
0
20
40
60
Ambient Temp. : Ta (℃ )
Ambient Temp. : Ta (℃ )
80
100
Pulse Width vs. Maximum Tolerable Peak Current
Dynamic Drive Rating
Duty cycle vs. Maximum Forward Current
10
3.3
10kHz
1kHz
100Hz
50Hz
1
1
1
10
Duty (%)
2005.9.28
Ambient Temp. : Ta=25℃
10
IF Peak MAX./IF DC MAX.
Maximum Forward Current : IF MAX.(mA)
100
100
1
10
100
1000
10000
100000
Pulse Width : tw (μs )
Page 10
1105W Series
Single Color Dome Lens Type
(High Reliability type, V-Series)
Characteristics Chart（VFY,VFA,VFV,VFR)
Spectral Distribution
Spatial Distribution Example
Relative Intensity vs. Wavelength
Condition:IF=20mA
Ta=25℃
X-direction
Condition: Ta=25℃
0
Relative Intensity
30
30
50
60
60
90
90
Wavelength[nm]
Forward Voltage vs. Forward Current
Forward Current vs. Relative Intensity
Condition: Ta=25℃
Condition: Ta=25℃
1.5
Relative Intensity
Forward Current I F (mA)
100
10
1.0
VFY,VFA,VFV,VFR
0.5
VFV, VFR
VFY,VFA
0.0
1
1.5
1.6
1.7
1.8
1.9
2.0
2.1
Forward Voltage : VF(V)
2006.10.30
2.2
2.3
2.4
0
5
10
15
20
25
30
Forward Current : IF (mA)
Page 11
1105W Series
Single Color Dome Lens Type
(High Reliability type, V-Series)
Characteristics Chart（VFY,VFA,VFV,VFR)
Derating
Ambient Temp. vs. Relative Intensity
Ambient Temp. vs. Maximum Forward Current
Repetition Frequency：f ≧ 50Hz
Duty=5%
100
80
Duty=10%
60
Duty=20%
Relative Intensity
Maximum Forward Current : I F MAX. (mA)
Condition:IF=20mA
10.0
120
Duty=50%
40
VFA
1.0
VFV,VFR
DC
VFY
20
0.1
0
-40
-20
0
20
40
60
80
100
120
-40
-20
0
20
40
60
Ambient Temp. : Ta (℃ )
Ambient Temp. : Ta (℃ )
80
100
Pulse Width vs. Maximum Tolerable Peak Current
Dynamic Drive Rating
Duty cycle vs. Maximum Forward Current
10
3.3
10kHz
1
1kHz
100Hz
100
1000
50Hz
1
1
10
Duty (%)
2006.3.31
Ambient Temp. : Ta=25℃
10
IF Peak MAX./IF DC MAX.
Maximum Forward Current : IF MAX.(mA)
100
100
1
10
10000
100000
Pulse Width : tw (μs )
Page 12
1105W Series
Single Color Dome Lens Type
(High Reliability type, V-Series)
Package Dimensions
(Unit: mm)
Weight: (7.81)mg
Recommended Soldering Pattern
Surface Mount
(Unit: mm)
Reverse Mount
Taping Specification
Part No. : V
1105W -TR
Quantity: 2,000pcs/ reel(standard)
2005.9.28
(Unit: mm)
(Surface Mount)
Part No. : V
1105W -RR (Reverse Mount)
Quantity: 2,000pcs/ reel(standard)
Page 13
1105W Series
Single Color Dome Lens Type
(High Reliability type, V-Series)
Reflow Soldering Conditions
1) The above profile temperature gives the maximum temperature of the LED resin surface.
Please set the temperature so as to avoid exceeding this range.
2) Total times of reflow soldering process shall be no more than 2 times.
When the second reflow soldering process is performed, intervals between the first
and second reflow should be short as possible (while allowing some time for the
component to return to normal temperature after the first reflow) in order to prevent the
LED from absorbing moisture.
3) Temperature fluctuation to the LED during the pre-heating process shall be minimized.
Manual Soldering Conditions
Iron tip temp.
Soldering time and frequency
2010.7.31
350 ℃
3 s
1 time
(MAX.)
(MAX.)
(MAX.)
Page 14
1105W Series
Single Color Dome Lens Type
(High Reliability type, V-Series)
Reliability Testing Result
Reliability Testing Result Applicable Standard
Testing Conditions
Duration
Failure
Room Temp.
Operating Life
EIAJ ED4701/100(101)
Ta = 25℃, IF = Maxium Rated Current
1,000 h 0/20
High Temp.
Operating Life
EIAJ ED4701/100(101)
Ta = Maximum Rated Operating Temperature,
IF = Derating Value
1,000 h 0/20
Low Temp.
Operating Life
EIAJ ED4701/100(101)
Ta = -40℃, IF = Maxium Rated Current
1,000 h 0/20
Wet High Temp.
Operating Life
EIAJ ED4701/100(102)
Ta = 60℃, 90%, IF = Maxium Rated Current
1,000 h 0/20
Wet High Temp.
Storage Life
EIAJ ED4701/100(103)
Ta = 60℃, 90%
1,000 h 0/20
Thermal Shock
EIAJ ED4701/100(105)
Thermal Shock
Operating
EIAJ ED4701/100(105)
High Temp.
Storage Life
EIAJ ED4701/200(201)
Ta = Maximum Rated Storage Temperature
1,000 h 0/20
Low Temp.
Storage Life
EIAJ ED4701/200(202)
Ta = Minimum Rated Storage Temperature
1,000 h 0/20
Cycled Temp.
Humidity Life
EIAJ ED4701/200(203)
Resistance to
Reflow Soldering
EIAJ ED4701/300(301)
Electric Static Discharge
EIAJ ED4701/300(304)
C = 100pF, R2 = 1.5KΩ, ±2,000V
EIAJ ED4701/400(403)
98.1m/s (10G), 100 ～ 2KHz, 20min,
XYZ each direction
※1
(ESD)
Vibration,
Variable Frequency
※1 Reference test
Ta = -40℃ ～ Maximum Rated Storage Temperature
(each 15min.)
Ta = -40℃(off) ～ 85℃
(IF = Derating Value on), (each 15min.)
1,000 cycles 0/20
1,000 cycles 0/20
Ta = -30℃(2h) ～ 80℃, 95%(2h), 8h/cycle,
IF = Derating Value, 5min on-off
Moisture Soak : 30℃, 70%, 72h
Preheat : 150 ～ 180℃(120s Max.)
Soldering Temp. : 260℃(5s)
30 cycles 0/20
Twice 0/20
once each polarity 0/10
2
2 h 0/10
Failure Criteria
Items
Symbols
Conditions
Failure criteria
Luminous Intensity
Iv
IF Value of each product
Luminous Intensity
Testing Min. Value ＜ Spec. Min. Value x 0.5
Forward Voltage
VF
IF Value of each product
Forward Voltage
Testing Max. Value ≧ Spec. Max. Value x 1.2
Reverse Current
IR
VR = Maximum Rated
Reverse Voltage V
Testing Max. Value ≧ Spec. Max. Value x 2.5
Cosmetic Appearance
-
-
Occurrence of notable decoloration,
deformation and cracking
2007.8.31
Page 15
1105W Series
Single Color Dome Lens Type
(High Reliability type, V-Series)
Special Notice to Customers Using the Products and
Technical Information Shown in This Data Sheet
1) The technical information shown in the data sheets are limited to the typical characteristics and circuit
examples of the referenced products. It does not constitute the warranting of industrial property nor the
granting of any license.
2) For the purpose of product improvement, the specifications, characteristics and technical data described in
the data sheets are subject to change without prior notice. Therefore it is recommended that the most
updated specifications be used in your design.
3) When using the products described in the data sheets, please adhere to the maximum ratings for operating
voltage, heat dissipation characteristics, and other precautions for use. We are not responsible for any
damage which may occur if these specifications are exceeded.
4) The products that have been described to this catalog are manufactured so that they will be used for the
electrical instrument of the benchmark (OA equipment, telecommunications equipment, AV machine, home
appliance and measuring instrument).
The application of aircrafts, space borne application, transportation equipment, medical equipment and
nuclear power control equipment, etc. needs a high reliability and safety, and the breakdown and the wrong
operation might influence the life or the human body. Please consult us beforehand if you plan to use our
product for the usages of aircrafts, space borne application, transportation equipment, medical equipment
and nuclear power control equipment, etc. except OA equipment, telecommunications equipment, AV
machine, home appliance and measuring instrument.
5) In order to export the products or technologies described in this data sheet which are under the
“Foreign Exchange and Foreign Trade Control Law,” it is necessary to first obtain an export permit from the
Japanese government.
6) No part of this data sheet may be reprinted or reproduced without prior written permission from Stanley
Electric Co., Ltd.
7) The most updated edition of this data sheet can be obtained from the address below:
http://www.stanley-components.com
2007.8.31
Page 16
工商网监
湘ICP备2023018690号
