HEW1142LS

H□W1142L□ Series Right Angle Type White LED Features Package Product features Right Angle Type, Diffused pale yellow resin ・Outer Dimension 2.8 x 1.2 x 0.8mm ( L x W x H ) ・Temperature range Storage Temperature : -40℃～100℃ Operating Temperature : -30℃～85℃ ・Lead–free soldering compatible ・RoHS compliant Chromaticity coordinates x = 0.299YP., y = 0.296TYP. (Condition : IF=20mA) Spatial distribution Die materials Rank grouping parameter Assembly method Soldering methods Taping and reel ESD θx = 110 deg., θy = 105 deg. InGaN Sorted by luminous intensity and chromaticity per rank taping Auto pick & place machine (Auto Mounter) Recommendation of Reflow soldering / Flow Soldering (Dip Soldering) is impossible. 3,000pcs per reel in a 8mm width tape. (Standard) Reel diameter:φ180mm 1kV (HBM) Recommended Applications Cellular Phone, Mobile Equipment, Electric Household Appliances, Other General Applications 2007.10.31 Page 1 H□W1142L□ Series Right Angle Type White LED Color and Luminous Intensity (Ta=25℃) Part No. Material Emitted Color Lens Color Luminous Intensity Iv (mcd) MIN. TYP. IF Luminous Flux φ v (lm) TYP. IF HKW1142LT HEW1142LS InGaN InGaN White White Pale Yellow Pale Yellow 1,440 860 1,720 1,200 20 20 4.2 3.2 20 20 ※Note : The above luminous intensity(Iv) is the setup values of the sorting machine. (Tolerance : IV…±10%) 2007.10.31 Page 2 H□W1142L□ Series Right Angle Type White LED Absolute Maximum Ratings Item Power Dissipation Forward Current Pulse Forward Current ※ 1 Derating (Ta=25℃ or higher) Reverse Voltage Operating Temperature Storage Temperature Symbol Pd IF IFRM ⊿ IF ⊿ IFRM VR T opr Tstg Absolute Maximum Ratings HKW 114 30 100 0.4 1.33 5 -30～ +85 -40～ +100 HEW 120 30 100 0.4 1.33 5 Unit mW mA mA mA/℃ mA/℃ V ℃ ℃ (Ta=25℃) ※1 IFRM Measurement condition : Pulse Width≦1ms, Duty≦1/20 2007.10.31 Page 3 H□W1142L□ Series Right Angle Type White LED Electro-Optical Characteristics Characteristics HKW TYP. IF=20mA VF MAX. Reverse Current VR =5V IR MAX. 3.5 50 3.7 50 μA 3.2 HEW 3.2 V (Ta=25℃) Item Condition Symbol Unit Forward Voltage ※ 1 110(θ x) 110(θ x) Half Intensity Angle IF=20mA 2θ 1/2 TYP. 105(θｙ ) 105(θｙ ) Chromaticity Coordinates x IF=20mA y TYP. 0.296 0.296 TYP. 0.299 0.299 deg. ※1 Forward Voltage Tolerance Range : ±0.1V 2007.10.31 Page 4 H□W1142L□ Series Right Angle Type White LED Luminous Intensity Rank (HKW) (Ta=25℃) Intensity Tolerance each Rank : +/-10% Rank VA VB VC VD I V （mcd） Condition MIN. MAX. 1,440 1,580 1,580 1,720 IF=20mA 1,720 1,860 1,860 2,000 ※Please contact our sales staff concerning rank designation. Luminous Intensity Rank (HEW) (Ta=25℃) Intensity Tolerance each Rank : +/-10% Rank T2 U1 U2 VI V2 I V （mcd） Condition MIN. MAX. 860 1,000 1,000 1,200 1,200 1,440 IF=20mA 1,440 1,720 1,720 2,000 ※Please contact our sales staff concerning rank designation. 2007.10.31 Page 5 H□W1142L□ Series Right Angle Type White LED Sorting Chart for Chromaticity Coordinates (HKW) (Ta=25℃) Chromaticity Coordinates Tolerance Each Rank : +/-0.01 LEFT DOWN point LEFT UP point RIGHT UP point RIGHT UP point Rank 1p 1q 1r 1s 2p 2q 2r 2s x 0.272 0.280 0.282 0.288 0.292 0.296 0.300 0.304 y 0.258 0.248 0.272 0.262 0.286 0.276 0.295 0.285 x 0.264 0.272 0.276 0.282 0.287 0.292 0.297 0.300 y 0.267 0.258 0.281 0.272 0.295 0.286 0.305 0.295 x 0.276 0.282 0.287 0.292 0.297 0.300 0.307 0.309 y 0.281 0.272 0.295 0.286 0.305 0.295 0.315 0.305 x 0.282 0.288 0.292 0.296 0.300 0.304 0.309 0.311 y 0.272 0.262 0.286 0.276 0.295 0.285 0.305 0.294 ※ Please contact our sales staff concerning rank designation. 2007.10.31 Page 6 H□W1142L□ Series Right Angle Type White LED Sorting Chart for Chromaticity Coordinates (HEW) (Ta=25℃) Chromaticity Coordinates Tolerance Each Rank : +/-0.01 LEFT DOWN point LEFT UP point RIGHT UP point RIGHT UP point Rank 1c 2d x 0.280 0.296 y 0.248 0.276 x 0.264 0.287 y 0.267 0.295 x 0.287 0.307 y 0.295 0.315 x 0.296 0.311 y 0.276 0.294 ※ Please contact our sales staff concerning rank designation. 2007.10.31 Page 7 H□W1142L□ Series Right Angle Type White LED Technical Data (HKW) Spectral Distribution Relative Intensity vs. Wavelength Condition : Ta = 25℃, IF = 20mA Spatial Distribution Example Condition : Ta = 25℃ Relative Intensity Wavelength [nm] Forward Voltage vs. Forward Current Condition : Ta = 25℃ Forward Current vs. Relative Intensity Condition : Ta = 25℃ Forward Current IF(mA) Forward Voltage VF(V) Relative Intensity Forward Current IF(mA) 2007.10.31 Page 8 H□W1142L□ Series Right Angle Type White LED Technical Data (HKW) Derating Ambient Temperature vs. Maximum Forward Current Ambient Temperature vs. Relative Intensity Condition : IF = 20mA Maximum Forward Current : IF MAX. (mA) Ambient Temperature : Ta(℃) Relative Intensity Ambient Temperature : Ta(℃) Ambient Temperature vs. Forward Voltage Condition : IF = 20mA Forward Current vs. Chromaticity Condition : Ta = 25℃ Forward Voltage VF(V) Ambient Temperature : Ta(℃) y x 2007.10.31 Page 9 H□W1142L□ Series Right Angle Type White LED Technical Data (HKW) Ambient Temperature vs. Chromaticity Condition : IF = 20mA y x 2007.10.31 Page 10 H□W1142L□ Series Right Angle Type White LED Technical Data (HEW) Spectral Distribution Relative Intensity vs. Wavelength Condition : Ta = 25℃, IF = 20mA Spatial Distribution Example Condition : Ta = 25℃ Relative Intensity Wavelength [nm] Forward Voltage vs. Forward Current Condition : Ta = 25℃ Forward Current vs. Relative Intensity Condition : Ta = 25℃ Forward Current IF(mA) Forward Voltage VF(V) Relative Intensity Forward Current IF(mA) 2007.10.31 Page 11 H□W1142L□ Series Right Angle Type White LED Technical Data (HEW) Derating Ambient Temperature vs. Maximum Forward Current Ambient Temperature vs. Relative Intensity Condition : IF = 20mA Maximum Forward Current : IF MAX. (mA) Ambient Temperature : Ta(℃) Relative Intensity Ambient Temperature : Ta(℃) Ambient Temperature vs. Forward Voltage Condition : IF = 20mA Forward Current vs. Chromaticity Condition : Ta = 25℃ Forward Voltage VF(V) Ambient Temperature : Ta(℃) y x 2007.10.31 Page 12 H□W1142L□ Series Right Angle Type White LED Technical Data (HEW) Ambient Temperature vs. Chromaticity Condition : IF = 20mA y x 2007.10.31 Page 13 H□W1142L□ Series Right Angle Type White LED Package Dimensions (Unit: mm) Weight: (5.3)mg Recommended Soldering Pattern (Unit: mm) Taping Specification ・Quantity: 3,000pcs/ reel (standard) (Unit: mm) 2007.10.31 Page 14 H□W1142L□ Series Right Angle Type White LED Reflow Soldering Conditions 1) The above profile temperature gives the maximum temperature of the LED resin surface. Please set the temperature so as to avoid exceeding this range. 2) Total times of reflow soldering process shall be no more than 2 times. When the second reflow soldering process is performed, intervals between the first and second reflow should be short as possible (while allowing some time for the component to return to normal temperature after the first reflow) in order to prevent the LED from absorbing moisture. Manual Soldering Conditions Iron tip temp. Soldering time and frequency 350 ℃ 3s 1 time (MAX.) (MAX.) (MAX.) 2007.10.31 Page 15 H□W1142L□ Series Right Angle Type White LED Reliability Testing Result Reliability Testing Result Applicable Standard Room Temp. Operating Life High Temp. Operating Life Low Temp. Operating Life Wet High Temp. Operating Life Wet High Temp. Storage Life Thermal Shock High Temp. Storage Life Low Temp. Storage Life Cycled Temp. Humidity Life Resistance to Reflow Soldering Electric Static Discharge (ESD) Vibration, Variable Frequency EIAJ ED4701/100(101) EIAJ ED4701/100(101) EIAJ ED4701/100(101) EIAJ ED4701/100(102) EIAJ ED4701/100(103) EIAJ ED4701/100(105) EIAJ ED4701/200(201) EIAJ ED4701/200(202) EIAJ ED4701/200(203) EIAJ ED4701/300(301) EIAJ ED4701/300(304) EIAJ ED4701/400(403) Testing Conditions Ta = 25℃, IF = 3 0mA Ta = 85℃ ,IF = 6 mA Ta = -30 ℃, IF = 2 0mA Ta = 60℃, 90%, IF = 1 6mA Ta = 60℃, 90% Ta = -40 ℃ ～ 1 00 ℃ ( each 15min.) Ta = 100℃ Ta = -40 ℃ Ta = -10 ℃ ～ 6 5 ℃, 95%, 24h/cycle Preheat : 150 ～ 1 80 ℃(120s Max.) Soldering Temp. : 260℃(5s) Moisture Soak : 30 ℃, 70%, 72h C = 100pF, R2 = 1.5KΩ, ±1,000V 98.1m/s ( 10G), 100 ～ 2 KHz, 20min, XYZ each direction 2 Duration 1,000 h 1,000 h 1,000 h 1,000 h 1,000 h 200 cycles 1,000 h 1,000 h 10 cycles Twice once each polarity 2h Failure 0/20 0/20 0/20 0/20 0/20 0/20 0/20 0/20 0/20 0/20 0/20 0/20 Failure Criteria Items Luminous Intensity Forward Voltage Reverse Current Cosmetic Appearance Symbols Iv VF IR - Conditions IF=20mA IF=20mA VR=5V - Failure criteria Testing Min. Value ＜ Spec. Min. Value x 0.7 Testing Max. Value ≧ Spec. Max. Value x 1.2 Testing Max. Value ≧ Spec. Max. Value x 2.5 Occurrence of notable decoloration, deformation and cracking 2007.10.31 Page 16 H□W1142L□ Series Right Angle Type White LED Special Notice to Customers Using the Products and Technical Information Shown in This Data Sheet 1) The technical information shown in the data sheets are limited to the typical characteristics and circuit examples of the referenced products. It does not constitute the warranting of industrial property nor the granting of any license. 2) For the purpose of product improvement, the specifications, characteristics and technical data described in the data sheets are subject to change without prior notice. Therefore it is recommended that the most updated specifications be used in your design. 3) When using the products described in the data sheets, please adhere to the maximum ratings for operating voltage, heat dissipation characteristics, and other precautions for use. We are not responsible for any damage which may occur if these specifications are exceeded. 4) The products that have been described to this catalog are manufactured so that they will be used for the electrical instrument of the benchmark (OA equipment, telecommunications equipment, AV machine, home appliance and measuring instrument). The application of aircrafts, space borne application, transportation equipment, medical equipment and nuclear power control equipment, etc. needs a high reliability and safety, and the breakdown and the wrong operation might influence the life or the human body. Please consult us beforehand if you plan to use our product for the usages of aircrafts, space borne application, transportation equipment, medical equipment and nuclear power control equipment, etc. except OA equipment, telecommunications equipment, AV machine, home appliance and measuring instrument. 5) In order to export the products or technologies described in this data sheet which are under the “Foreign Exchange and Foreign Trade Control Law,” it is necessary to first obtain an export permit from the Japanese government. 6) No part of this data sheet may be reprinted or reproduced without prior written permission from Stanley Electric Co., Ltd. 7) The most updated edition of this data sheet can be obtained from the address below: http://www.stanley-components.com 2007.10.31 Page 17