MU13-9102

MU13 Series Bi-Color / Light Bar Module Features Light emitting surface (Outer size) Product features 9 x 9 mm (10.1 x 10.1 mm) (L x W) ・Bi-Color ・Lead–free soldering compatible ・RoHS compliant Peak wavelength Green Yellow Green Red Die materials Green, Yellow Green : GaP Red : GaAlAs Soldering methods TTW (Through The Wave) soldering and manual soldering Soldering methods More than 2kV(HBM) Packing Plastic bag : 555 nm : 570 nm : 660 nm Recommended Applications Electric Household Appliances, OA/FA, Other General Applications 2012.11.19 Page 1 MU13 Series Bi-Color / Light Bar Module Color and L uminous Intens ity Inte nsity ※ 1 P a rt No. Ma te ria l E mitte d Color Gre e n Ga P Re d Ga AlAs Ye llow Gre e n Ga P Re d Ga AlAs MU13-9101 MU13-9102 Re sin Color Milky White Milky White Numbe r of Chips Iv (mc d) MIN. 7 6 20 6 T YP . 14 12 40 12 IF 20 20 20 20 5 1 5 1 ※ 1 L uminous Inte nsity : 5 chips (Gre e n ・ Ye llow Gre e n), 1 chip (Re d) Abs olute Maximum R atings Ite m S ymbol P owe r Dissipa tion ※ 2 F orwa rd Curre nt Pd P ulse F orwa rd Curre nt De ra ting (T a =25℃ or hig he r) ※3 (Ta=25℃) Absolute Ma x imum Ra ting s Unit Gre e n Ye llow Gre e n Re d 310 375 60 mW IF 25 30 30 mA IF R M 60 60 60 mA ⊿ IF ⊿ IF R M 0.33 0.40 0.40 0.80 0.80 0.80 mA/℃ mA/℃ 4 4 4 V Re ve rse Volta g e VR Ope ra ting Te mpe ra ture T opr S tora g e T e mpe ra ture T s tg -40～ +85 -40～ +85 ℃ ℃ ※ 2 P ow e r Dissipa tion : 5 chips (Gre e n ・ Ye llow Gre e n), 1 chip (Re d) T he othe r Ite ms : 1 chip ※ 3 IF R M Me a sure me nt condition : P ulse Width ≦ 2ms, Duty ≦ 1/5 E lectro- Optical Characteris tics Ite m Conditions Cha ra cte ristics S ymbol Gre e n Ye llow Gre e n Re d Unit T YP . 2.2 2.1 1.7 MAX . 2.5 2.5 2.0 IR MAX . 100 100 100 λp T YP . 555 570 660 μA nm ⊿λ T YP . 30 30 30 nm F orw a rd Volta ge IF =20mA VF Re ve rse Curre nt V R =4V P e a k Wa ve le ng th IF =20mA S pe ctra l L ine Ha lf IF =20mA Width (Ta=25℃) V ※ T he a bove Ite ms : 1 chip 2012.11.19 Page 2 MU13 Series Bi-Color / Light Bar Module Technical Data(9101) Forward Voltage vs. Forward Current Ambient Temperature vs. Forward Voltage Forward Voltage VF(V) Forward Current IF(mA) Condition : Ta = 25℃ Forward Voltage VF(V) Ambient Temperature : Ta(℃) Forward Current vs. Relative Intensity Ambient Temperature vs. Relative Intensity Condition : IF=20mA Relative Intensity Relative Intensity Condition : Ta = 25℃ Forward Current IF(mA) 2012.11.19 Ambient Temperature : Ta(℃) Page 3 MU13 Series Bi-Color / Light Bar Module Technical Data(9101) Power Dissipation vs. Ambient Temperature Derating Power Dissipation : Pd (mW) Maximum Forward Current : IF MAX. (mA) Ambient Temperature vs. Maximum Forward Current Repetition Frequency : f ≧ 100Hz Ambient Temperature : Ta(℃) Ambient Temperature : Ta(℃) Pulse Width vs. Maximum Tolerable Peak Current Dynamic Drive Rating Duty cycle vs. Maximum Forward Current Condition : Ta = 25℃ IF peak Max./IF DC MAX. Maximum Forward Current : IF MAX. (mA) Condition : Ta = 25℃ Pulse Width : tw (μs) 2012.11.19 Duty (%) Page 4 MU13 Series Bi-Color / Light Bar Module Technical Data(9102) Forward Voltage vs. Forward Current Ambient Temperature vs. Forward Voltage Forward Voltage VF(V) Forward Current IF(mA) Condition : Ta = 25℃ Forward Voltage VF(V) Ambient Temperature : Ta(℃) Forward Current vs. Relative Intensity Ambient Temperature vs. Relative Intensity Condition : IF=20mA Relative Intensity Relative Intensity Condition : Ta = 25℃ Forward Current IF(mA) 2012.11.19 Ambient Temperature : Ta(℃) Page 5 MU13 Series Bi-Color / Light Bar Module Technical Data(9102) Power Dissipation vs. Ambient Temperature Derating Power Dissipation : Pd (mW) Maximum Forward Current : IF MAX. (mA) Ambient Temperature vs. Maximum Forward Current Repetition Frequency : f ≧ 100Hz Ambient Temperature : Ta(℃) Ambient Temperature : Ta(℃) Pulse Width vs. Maximum Tolerable Peak Current Dynamic Drive Rating Duty cycle vs. Maximum Forward Current Condition : Ta = 25℃ IF peak Max./IF DC MAX. Maximum Forward Current : IF MAX. (mA) Condition : Ta = 25℃ Pulse Width : tw (μs) 2012.11.19 Duty (%) Page 6 MU13 Series Bi-Color / Light Bar Module Package Dimensions (Unit: mm) (Tolerance：±0.25 mm) ● ※ mark : The measure of lead root 2012.11.19 Page 7 MU13 Series Bi-Color / Light Bar Module TTW (Through The Wave) soldering Conditions Pre-heating 100 ℃ 60 s (MAX.) Resin surface temperature (MAX.) Solder Bath Temp. 265 ℃ (MAX.) Dipping Time Position 5 s (MAX.) At least 2.0 mm away from the root of lead 1) The dip soldering process shall be 2 times maximum. 2) The product shall be cooled to normal temperature before the second dipping process. Manual Soldering Conditions Iron tip temp. Soldering time and frequency Position 2012.11.19 360 ℃ (MAX.) (MAX.) 3 s 2 times (MAX.) At least 2.0 mm away from the root of lead Page 8 MU13 Series Bi-Color / Light Bar Module Reliability Testing Result Reliability Testing Result Applicable Standard Room Temp. Operating Life Resistance to Soldering Heat EIAJ ED4701/100(101) EIAJ ED4701/300(302) Temperature Cycling EIAJ ED4701/100(105) Wet High Temp. Storage Life High Temp. Storage Life Low Temp. Storage Life Lead Tension Vibration, Variable Frequency Lead Bend Shock EIAJ ED4701/100(103) EIAJ ED4701/200(201) EIAJ ED4701/200(202) EIAJ ED4701/400(401) EIAJ ED4701/400(403) EIAJ ED4701/400(401) JIS C 7201 A-8 Testing Conditions Duration Ta = 25℃, IF = Maxium Rated Current Failure 1,000 h 0/10 10s 0/10 Minimum Rated Storage Temperature(30min) ～Normal Temperature(15min) ～Maximum Rated Storage Temperature(30min) ～Normal Temperature(15min) 5 cycles 0/10 Ta = 60±2℃, RH = 90±5% 1,000 h 0/10 Ta = Maximum Rated Storage Temperature 1,000 h 0/10 Ta = Minimum Rated Storage Temperature 1,000 h 0/10 10s 0/10 2h 0/10 Twice 0/10 3 times 0/10 260±5℃, 3mm from package base 5N,1time 2 98.1m/s (10G), 100 ～ 2KHz sweep for 20min., XYZ each direction 2.5N, 0°←→ 90° It falls on wood engraving from height of 75cm. Failure Criteria Items Symbols Conditions Failure criteria Luminous Intensity Iv IF=20mA Testing Min. Value ＜ Spec. Min. Value x 0.5 Forward Voltage VF IF=20mA Testing Max. Value ≧ Spec. Max. Value x 1.2 Reverse Current IR VR=4V Testing Max. Value ≧ Spec. Max. Value x 2.5 Cosmetic Appearance - - Occurrence of notable decoloration, deformation and cracking 2012.11.19 Page 9 MU13 Series Bi-Color / Light Bar Module Special Notice to Customers Using the Products and Technical Information Shown in This Data Sheet 1) The technical information shown in the data sheets are limited to the typical characteristics and circuit examples of the referenced products. It does not constitute the warranting of industrial property nor the granting of any license. 2) For the purpose of product improvement, the specifications, characteristics and technical data described in the data sheets are subject to change without prior notice. Therefore it is recommended that the most updated specifications be used in your design. 3) When using the products described in the data sheets, please adhere to the maximum ratings for operating voltage, heat dissipation characteristics, and other precautions for use. We are not responsible for any damage which may occur if these specifications are exceeded. 4) The products that have been described to this catalog are manufactured so that they will be used for the electrical instrument of the benchmark (OA equipment, telecommunications equipment, AV machine, home appliance and measuring instrument). The application of aircrafts, space borne application, transportation equipment, medical equipment and nuclear power control equipment, etc. needs a high reliability and safety, and the breakdown and the wrong operation might influence the life or the human body. Please consult us beforehand if you plan to use our product for the usages of aircrafts, space borne application, transportation equipment, medical equipment and nuclear power control equipment, etc. except OA equipment, telecommunications equipment, AV machine, home appliance and measuring instrument. 5) In order to export the products or technologies described in this data sheet which are under the “Foreign Exchange and Foreign Trade Control Law,” it is necessary to first obtain an export permit from the Japanese government. 6) No part of this data sheet may be reprinted or reproduced without prior written permission from Stanley Electric Co., Ltd. 7) The most updated edition of this data sheet can be obtained from the address below: http://www.stanley-components.com 2012.11.19 Page 10