PS1192FB
Surface Mount Phototransistor/Right Angle Type
Features
Package
Product features
Right Angle type, Black Visible Radiation Cut Filter epoxy
・Outer Dimension 3.0 x 1.2 x 2.5 mm ( L x W x H )
・Photo Current : 7mA TYP. (VCE=5V,Ee=5mW/cm2)
・Visible Radiation Cut Filter under 700nm
・Lead–free soldering compatible
・RoHS compliant
Peak Sensitivity Wavelength
900nm
Half Intensity Angle
θx = 50 deg., θy = 100 deg.
Die materials
Si
Rank grouping parameter
Sorted by photo current per rank taping
Assembly method
Auto pick & place machine (Auto Mounter)
Soldering methods
Reflow soldering, and manual soldering
※Please refer to Soldering Conditions about soldering.
Taping and reel
3,000pcs per reel in a 8mm width tape. (Standard)
Reel diameter:φ180mm
ESD
2kV (HBM)
Recommended Applications
Car Audio, Electric Household Appliances, OA/FA, PC/Peripheral Equipment, Other General Applications
2006.8.31
Page 1
PS1192FB
Surface Mount Phototransistor/Right Angle Type
Absolute Maximum Ratings
(Ta=25℃)
Item
Symbol
Absolute Maximum Ratings
Unit
Collector Dissipation
Pc
75
mW
Collector-Emitter Voltage
VCEO
30
V
Emitter-Collector Voltage
VECO
5
V
Collector Current
Ic
20
mA
Operating Temperature
Topr
-30~+85
℃
Storage Temperature
Tstg
-40~+100
℃
Electro-Optical Characteristics
Item
Photo Current
(Ta=25℃)
Conditions
VCE=5V,
2 ※1
Ee=5mW/cm
Symbol
Ic
Characteristics
Unit
Min.
1.4
mA
TYP.
7
mA
Response Time
VCE =10V, Ic=2mA,
RL=100Ω
tr/tf
TYP.
8/9
μs
Dark Current
VCEO=10V
ICEO
Max.
0.1
μA
Peak Sensitivity Wavelength
VCE=5V
λp
TYP.
900
nm
Spatial Half Width
VCE=5V
⊿θ
TYP.
50(θx)
100(θy)
deg.
※1 Color temperature is 2,856K. Employs a standard tungsten lamp.
2005.3.2
Page 2
PS1192FB
Surface Mount Phototransistor/Right Angle Type
Photo Current Rank
(Ta=25℃)
Ic(mA)
R ank
Condition
MIN.
MAX .
A
1.4
4.2
B
2.4
7.2
C
4.2
12.6
D
7.2
21.6
E
12.6
37.8
V CE = 5V
E e = 5mW/cm
2
※Please contact our sales staff concerning rank designation.
2005.3.2
Page 3
PS1192FB
Surface Mount Phototransistor/Right Angle Type
Technical Data
Relative Sensitivity vs. Sensitivity Wavelength
Spatial Distribution Example
Condition : Ta = 25℃, VCE = 5V
Relative Sensitivity
Condition : Ta = 25℃
Sensitivity Wavelength [nm]
Radiation Luminance vs. Relative Photo Current
Collector-Emitter Voltage vs. Photo Current
Radiation Luminance Ee(mW/cm2)
It is based on Ee=5mW/cm2.
Employs a standard tungsten lamp of 2,856K.
2005.9.9
Condition : Ta = 25℃
Photo Current Ic (mA)
Relative Photo Current Ic
Condition : Ta = 25℃, VCE = 5V
Collector-Emitter Voltage VCE(V)
Employs a standard tungsten lamp of 2,856K.
Page 4
PS1192FB
Surface Mount Phototransistor/Right Angle Type
Technical Data
Response Time Measuring Circuit
Load Resistance vs. Response Time
Response Time (μs)
Condition : VCE=10V, Ic=2mA, Ta=25℃
Load Resistance : RL(Ω)
Ambient Temperature vs. Collector Dissipation
Ambient Temperature vs. Dark Current
Dark Current : ICEO(A)
Collector Dissipation : Pc(mW)
Condition : VCEO = 10V
Ambient Temperature : Ta(℃)
2005.3.31
Ambient Temperature : Ta(℃)
Page 5
PS1192FB
Surface Mount Phototransistor/Right Angle Type
Technical Data
Ambient Temperature vs. Relative Photo Current
Relative Photo Current Ic (mA)
Condition : VCE = 5V
Ambient Temperature : Ta(℃)
2005.3.2
Page 6
PS1192FB
Surface Mount Phototransistor/Right Angle Type
Package Dimensions
(Unit: mm)
Weight: (10.0)mg
Recommended Soldering Pattern
Taping Specification
(Unit: mm)
(Unit: mm)
Quantity: 3,000pcs/ reel (standard)
2005.5.30
Page 7
PS1192FB
Surface Mount Phototransistor/Right Angle Type
Reflow Soldering Conditions
1) The above profile temperature gives the maximum temperature of the device resin surface.
Please set the temperature so as to avoid exceeding this range.
2) Total times of reflow soldering process shall be no more than 2 times.
When the second reflow soldering process is performed, intervals between the first
and second reflow should be short as possible (while allowing some time for the
component to return to normal temperature after the first reflow) in order to prevent the
device from absorbing moisture.
3) Temperature fluctuation to the device during the pre-heating process shall be minimized.
Manual Soldering Conditions
Iron tip temp.
Soldering time and frequency
2005.3.2
350 ℃
3 s
1 time
(MAX.) (30 W Max.)
(MAX.)
(MAX.)
Page 8
PS1192FB
Surface Mount Phototransistor/Right Angle Type
Reliability Testing Result
Reliability Testing
Result
Applicable Standard
Room Temp.
Operating Life
EIAJ ED4701/100(101)
Ta = 25℃, Pc = Maxium Rated Power Dissipation
Resistance to
Soldering Heat
EIAJ ED4701/300(301)
(Pretreatment) Individual standard
(Reflow Soldering) Pre-heating
150℃~180℃ 120s
Operating Heating
230℃ Min.
Peak temperature 260℃
Temperature Cycling
EIAJ ED4701/100(105)
Wet High Temp.
Storage Life
EIAJ ED4701/100(103)
High Temp.
Storage Life
Low Temp.
Storage Life
EIAJ ED4701/200(201)
EIAJ ED4701/200(202)
Vibration,
Variable Frequency
EIAJ ED4701/400(403)
Testing Conditions
Duration
Failure
1,000 h
0/16
Twice
0/16
Minimum Rated Storage Temperature(30min)
~Normal Temperature(15min)
~Maximum Rated Storage Temperature(30min)
~Normal Temperature(15min)
5 cycles
0/16
Ta = 60±2℃, RH = 90±5%
1,000 h
0/16
Ta = Maximum Rated Storage Temperature
1,000 h
0/16
Ta = Minimum Rated Storage Temperature
1,000 h
0/16
2h
0/16
2
98.1m/s (10G), 100 ~ 2KHz sweep for 20min.,
XYZ each direction
Failure Criteria
Items
Symbols
Conditions
Failure criteria
Photo Current
IC
EE Value of each product
Irradiance of Photo Current
VCE Value of each product
Collector-emitter Voltage of
Photo Current
Testing Max. Value ≧Initial Value x 1.3
Testing Min. Value ≦ Initial Value x 0.7
Dark Current
ICEO
VCEO Value of each product
Collector-emitter Voltage of Dark
Current
Testing Max. Value ≧ Spec. Max. Value x 1.2
2010.12.30
2007.8.31
Page 9
PS1192FB
Surface Mount Phototransistor/Right Angle Type
Special Notice to Customers Using the Products and
Technical Information Shown in This Data Sheet
1) The technical information shown in the data sheets are limited to the typical characteristics and circuit
examples of the referenced products. It does not constitute the warranting of industrial property nor the
granting of any license.
2) For the purpose of product improvement, the specifications, characteristics and technical data described in
the data sheets are subject to change without prior notice. Therefore it is recommended that the most
updated specifications be used in your design.
3) When using the products described in the data sheets, please adhere to the maximum ratings for operating
voltage, heat dissipation characteristics, and other precautions for use. We are not responsible for any
damage which may occur if these specifications are exceeded.
4) The products that have been described to this catalog are manufactured so that they will be used for the
electrical instrument of the benchmark (OA equipment, telecommunications equipment, AV machine, home
appliance and measuring instrument).
The application of aircrafts, space borne application, transportation equipment, medical equipment and
nuclear power control equipment, etc. needs a high reliability and safety, and the breakdown and the wrong
operation might influence the life or the human body. Please consult us beforehand if you plan to use our
product for the usages of aircrafts, space borne application, transportation equipment, medical equipment
and nuclear power control equipment, etc. except OA equipment, telecommunications equipment, AV
machine, home appliance and measuring instrument.
5) In order to export the products or technologies described in this data sheet which are under the
“Foreign Exchange and Foreign Trade Control Law,” it is necessary to first obtain an export permit from the
Japanese government.
6) No part of this data sheet may be reprinted or reproduced without prior written permission from Stanley
Electric Co., Ltd.
7) The most updated edition of this data sheet can be obtained from the address below:
http://www.stanley-components.com
2007.8.31
Page 10