UB1105C-0005

U□1105C-0005 Series Single Color Super Wide Angle Type (h=0.5 mm) Features Package Product features Super Wide Angle Type (h=0.5mm), Water Clear resin ・ Outer Dimension 1.6 x 1.25 x 0.5mm ( L x W x H ) ・Temperature range Storage Temperature : -40℃～100℃ Operating Temperature : -40℃～ 85℃ ・Lead–free soldering compatible ・RoHS compliant Dominant wavelength Blue Green : 470nm(UB) : 527nm(UG) Spatial distribution Die materials Rank grouping parameter Assembly method Soldering methods Taping and reel ESD 178 deg. InGaN Sorted by luminous intensity and wavelength per rank taping Auto pick & place machine (Auto Mounter) Reflow soldering and manual soldering 4,000pcs per reel in a 8mm width tape. (Standard) Reel diameter: φ180mm 1kV (HBM) Recommended Applications Cellular Phone only 2007.8.31 Page 1 U□1105C-0005 Series Single Color Super Wide Angle Type (h=0.5 mm) Color and Luminous Intensity Dominant Wavelength λ d (nm) TYP. IF MIN. (Ta=25℃) Part No. Material Emitted Color Lens Color Luminous Intensity Iv (mcd) TYP. IF UB1105C-0005 UG1105C-0005 InGaN InGaN Blue Green Water Clear 470 527 5 5 6 16 16 40 5 5 ※Note : The luminous intensity(Iv) and dominant wavelength (λd) above are the setup values of the sorting machine. (Tolerance : IV…±10%, λd ...±3nm) 2006.11.29 Page 2 U□1105C-0005 Series Single Color Super Wide Angle Type (h=0.5 mm) Absolute Maximum Ratings Absolute Maximum Ratings (Ta=25℃) Item Power Dissipation Forward Current Pulse Forward Current ※1 Symbol Pd IF IFRM ⊿ IF ⊿ IFRM VR T opr Tstg UB 70 20 48 0.28 0.69 5 -40～ +85 UG 76 20 48 0.28 0.69 5 Unit mW mA mA mA/℃ mA/℃ V ℃ ℃ Derating (Ta=25℃ or higher) Reverse Voltage Operating Temperature Storage Temperature -40～ +100 ※1 IFRMMeasurement condition : Pulse Width≦1ms., Duty≦1/20. 2006.11.29 Page 3 U□1105C-0005 Series Single Color Super Wide Angle Type (h=0.5 mm) Electro-Optical Characteristics Item Symbol TYP. Forward Voltage IF=5mA VF MAX. Reverse Current Peak Wavelength Dominant Wavelength Spectral Line Half Width Half Intensity Angle VR =5V IF=5mA IF=5mA IF=5mA IF=5mA IR λp λd ⊿λ 2θ 1/2 MAX. TYP. TYP. TYP. TYP. 3.2 100 466 470 30 178 3.3 100 522 527 35 178 μA nm nm nm deg. Characteristics UB 2.9 UG 2.9 V Unit (Ta=25℃) Conditions ※Note: The dominant wavelength (λd) above is the setup value of the sorting machine. （Tolerance: λd …±3nm） 2006.11.29 Page 4 U□1105C-0005 Series Single Color Super Wide Angle Type (h=0.5 mm) Luminous Intensity Rank IV（ mcd） Rank UB IF=5mA MIN. MAX. 6 10 10 16 16 25 25 40 40 UG IF=5mA MIN. MAX. 16 25 25 40 40 64 64 100 100 - (Ta=25℃) Intensity Tolerance each Rank : +/- 10% A B C D E ※ Please contact our sales staff concerning rank designation. 2006.11.29 Page 5 U□1105C-0005 Series Single Color Super Wide Angle Type (h=0.5 mm) Color Tone Groups (λd) (Ta=25℃) Tolerance: +/- 3nm Dominant Wavelength λ d (nm) Rank 1 2 3 UB IF=5mA MIN. MAX. 465 470 470 475 UG IF=5mA MIN. MAX. 515 527 527 540 ※ Please contact our sales staff concerning rank designation. 2006.11.29 Page 6 U□1105C-0005 Series Single Color Super Wide Angle Type (h=0.5 mm) Technical Data(UB) Spectral Distribution Relative Intensity vs. Wavelength Condition : Ta = 25℃, IF = 5mA Spatial Distribution Example Condition : Ta = 25℃ Relative Intensity Wavelength [nm] Forward Voltage vs. Forward Current Condition : Ta = 25℃ Forward Current vs. Relative Intensity Condition : Ta = 25℃ Forward Current IF(mA) Forward Voltage VF(V) Relative Intensity Forward Current IF(mA) 2006.11.29 Page 7 U□1105C-0005 Series Single Color Super Wide Angle Type (h=0.5 mm) Technical Data(UB) Derating Ambient Temperature vs. Maximum Forward Current Repetition Frequency : f ≧ 50Hz Ambient Temperature vs. Relative Intensity Maximum Forward Current : IF MAX. (mA) Ambient Temperature : Ta(℃) Relative Intensity Ambient Temperature : Ta(℃) Power Dissipation vs. Ambient Temperature Pulse Width vs. Maximum Tolerable Peak Current Condition : Ta = 25℃ Power Dissipation : Pd (mW) Ambient Temperature : Ta(℃) IF peak Max./IF DC MAX. Pulse Width : tw (μs) 2006.11.29 Page 8 U□1105C-0005 Series Single Color Super Wide Angle Type (h=0.5 mm) Technical Data(UB) Duty Cycle vs. Maximum Forward Current Ambient Temperature vs. Forward Voltage Maximum Forward Current : IF MAX. (mA) Forward Voltage VF(V) Duty(%) Ambient Temperature : Ta(℃) 2006.11.29 Page 9 U□1105C-0005 Series Single Color Super Wide Angle Type (h=0.5 mm) Technical Data(UG) Spectral Distribution Relative Intensity vs. Wavelength Condition : Ta = 25℃, IF = 5mA Spatial Distribution Example Condition : Ta = 25℃ Relative Intensity Wavelength [nm] Forward Voltage vs. Forward Current Condition : Ta = 25℃ Forward Current vs. Relative Intensity Condition : Ta = 25℃ Forward Current IF(mA) Forward Voltage VF(V) Relative Intensity Forward Current IF(mA) 2006.11.29 Page 10 U□1105C-0005 Series Single Color Super Wide Angle Type (h=0.5 mm) Technical Data(UG) Derating Ambient Temperature vs. Maximum Forward Current Repetition Frequency : f ≧ 50Hz Ambient Temperature vs. Relative Intensity Maximum Forward Current : IF MAX. (mA) Ambient Temperature : Ta(℃) Relative Intensity Ambient Temperature : Ta(℃) Power Dissipation vs. Ambient Temperature Pulse Width vs. Maximum Tolerable Peak Current Condition : Ta = 25℃ Power Dissipation : Pd (mW) Ambient Temperature : Ta(℃) IF peak Max./IF DC MAX. Pulse Width : tw (μs) 2006.11.29 Page 11 U□1105C-0005 Series Single Color Super Wide Angle Type (h=0.5 mm) Technical Data(UG) Duty Cycle vs. Maximum Forward Current Ambient Temperature vs. Forward Voltage Maximum Forward Current : IF MAX. (mA) Forward Voltage VF(V) Duty(%) Ambient Temperature : Ta(℃) 2006.11.29 Page 12 U□1105C-0005 Series Single Color Super Wide Angle Type (h=0.5 mm) Package Dimensions (Unit: mm) Weight: (1.32)mg Recommended Soldering Pattern (Unit: mm) Taping Specification Quantity : 4,000pcs/ reel (standard) (Unit: mm) 2007.10.12 Page 13 U□1105C-0005 Series Single Color Super Wide Angle Type (h=0.5 mm) Reflow Soldering Conditions 1) The above profile temperature gives the maximum temperature of the LED resin surface. Please set the temperature so as to avoid exceeding this range. 2) Total times of reflow soldering process shall be no more than 2 times. When the second reflow soldering process is performed, intervals between the first and second reflow should be short as possible (while allowing some time for the component to return to normal temperature after the first reflow) in order to prevent the LED from absorbing moisture. 3) Temperature fluctuation to the LED during the pre-heating process shall be minimized. (6 maximum) Manual Soldering Conditions Iron tip temp. Soldering time and frequency 350 3s 1 time (MAX.) (MAX.) (MAX.) 2007.8.31 Page 14 U□1105C-0005 Series Single Color Super Wide Angle Type (h=0.5 mm) Handling These types are designed chiefly for Cellular phone application, and are setting the thickness of the Product to about 0.4-0.5 mm thinly.To achieve the tin type of the product, making each material thin is aimed at. Because they are inferior to our general LEDs by an external stress, please use these product types after paying attention to the following. 1)Please set the mounting load to Max. 2N. 2)Please do not increase more quantity of the soldering paste than necessary quantity (The thickness of stencil Mask : about 100-120μ), because the terminal area of the product is small. 3)Please avoid the collision of the mounting board etc. after LEDs were mounted on the substrate. 4)When warp of substrate is large after these were mounted on FPC etc, please use these product types after affirming these is no problem. 5)Please use these product types after affirming there is no problem about the mounting position etc. of product from substrate edge, when mounting them on multi-layer and multi-piece PCBs. 2006.11.29 Page 15 U□1105C-0005 Series Single Color Super Wide Angle Type (h=0.5 mm) Reliability Testing Result Reliability Testing Result Applicable Standard Room Temp. Operating Life Resistance to Soldering Heat EIAJ ED4701/100(101) EIAJ ED4701/300(301) EIAJ ED4701/100(105) EIAJ ED4701/100(103) EIAJ ED4701/200(201) EIAJ ED4701/200(202) EIAJ ED4701/400(403) Testing Conditions Ta = 25 ℃, IF = Maxium Rated Current Pre-heating : 150 ～180 ℃ 1 20s Max. Operation Heating : 230 ℃ 4 0s Max. Peak Temperature : 260 ℃ Minimum Rated Storage Temperature(30min) ～Normal Temperature(15min) ～Maximum Rated Storage Temperature(30min) ～Normal Temperature(15min) Ta = 60±2 ℃, RH = 90±5% Ta = Maximum Rated Storage Temperature Ta = Minimum Rated Storage Temperature 98.1m/s (10G), 100 ～ 2 KHz sweep for 20min., XYZ each direction 2 Duration 1,000 h Twice Failure 0/25 0/25 Temperature Cycling Wet High Temp. Storage Life High Temp. Storage Life Low Temp. Storage Life Vibration, Variable Frequency 5 cycles 0/25 1,000 h 1,000 h 1,000 h 2h 0/25 0/25 0/25 0/10 Failure Criteria Items Luminous Intensity Forward Voltage Reverse Current Cosmetic Appearance Symbols Iv VF IR - Conditions IF Value of each product Luminous Intensity IF Value of each product Forward Voltage VR = Maximum Rated Reverse Voltage V - Failure criteria Testing Min. Value ＜ Spec. Min. Value x 0.5 Testing Max. Value ≧ Spec. Max. Value x 1.2 Testing Max. Value ≧ Spec. Max. Value x 2.5 Occurrence of notable decoloration, deformation and cracking 2007.8.31 Page 16 U□1105C-0005 Series Single Color Super Wide Angle Type (h=0.5 mm) Special Notice to Customers Using the Products and Technical Information Shown in This Data Sheet 1) The technical information shown in the data sheets are limited to the typical characteristics and circuit examples of the referenced products. It does not constitute the warranting of industrial property nor the granting of any license. 2) For the purpose of product improvement, the specifications, characteristics and technical data described in the data sheets are subject to change without prior notice. Therefore it is recommended that the most updated specifications be used in your design. 3) When using the products described in the data sheets, please adhere to the maximum ratings for operating voltage, heat dissipation characteristics, and other precautions for use. We are not responsible for any damage which may occur if these specifications are exceeded. 4) The products that have been described to this catalog are manufactured so that they will be used for the electrical instrument of the benchmark (OA equipment, telecommunications equipment, AV machine, home appliance and measuring instrument). The application of aircrafts, space borne application, transportation equipment, medical equipment and nuclear power control equipment, etc. needs a high reliability and safety, and the breakdown and the wrong operation might influence the life or the human body. Please consult us beforehand if you plan to use our product for the usages of aircrafts, space borne application, transportation equipment, medical equipment and nuclear power control equipment, etc. except OA equipment, telecommunications equipment, AV machine, home appliance and measuring instrument. 5) In order to export the products or technologies described in this data sheet which are under the “Foreign Exchange and Foreign Trade Control Law,” it is necessary to first obtain an export permit from the Japanese government. 6) No part of this data sheet may be reprinted or reproduced without prior written permission from Stanley Electric Co., Ltd. 7) The most updated edition of this data sheet can be obtained from the address below: http://www.stanley-components.com 2007.8.31 Page 17