Standard Product Reference Sheet
VCHW1158LDS-TR
Features
Package
Product features
PLCC-2 Type, Diffused pale yellow lens color
Outer Dimension 2.17 x 1.4 x 1.3mm ( L x W x H )
・High reliability
(for automotive applications and other high-reliability required applications)
・Lead–free soldering compatible
・RoHS compliant
Recommended Applications
・Automotive interior: Switch and buttons , meter panel, car audio , climate control, etc.
2016.2.16
Page 1
Outline Dimensions
VCHW1158LDS-TR
Unit
Weight
Tolerance
: mm
: 8mg
: ±0.1
Traceability Marking area
NO.
PART NAME
REMARKS
QTY.
①
LED Die
InGaN
1
②
Lamp Housing
White Resin
1
③
Terminal
Au/Pd Plating
2
④
Encapsulant
Silcorn Resin
1
Recommended Pad
Unit
2016.2.16
: mm
Page 2
VCHW1158LDS-TR
Specifications
【 Product Overview 】
Die Material
InGaN
Emitting Color
White
Resin Color (Emitting Area)
Diffused Pale Yellow
Resin Color (Lamp Housing)
White
【 Absolute Maximum Ratings 】
(Ta=25℃)
ITEM
SYMBOL
MAXIMUM RATINGS
UNITS
Power Dissipation
Pd
72
mW
Forward Current
IF
20
mA
Repetitive Peak Forward Current
"10ms,1/10duty"
IFRM
50
mA
IF Derate Linearly from "85℃"
ΔIF
0.57
mA/℃
IFRM Derate Linearly from "85℃"
ΔIFRM
1.43
mA/℃
Reverse Voltage
VR
5
V
Operating Temperature
Topr
-40 ～ +100
℃
Storage Temperature
Tstg
-40 ～ +120
℃
Electrostatic Discharge Threshold "HBM"
ESD
1,000
V
Note1
Soldering Temperature
"Reflow Soldering"
Tsld
260
℃
Note2
Note 1
ESD testing method : EIAJ4701/300(304) Human Body Model(HBM) 1.5kΩ,100pF
Note 2
Please refer to page A-1,Soldering Conditions for deatails.
【 Thermal Characteristics 】
ITEM
Thermal Resistance
【Junction - Ambient】
Thermal Resistance
【Junction - Solder point】
Junction Temperature
(Ta=25℃)
SYMBOL
TYP.
MAX.
UNITS
Rth(j-a)
400
-
℃/W
Rth(j-s)
250
-
℃/W
Tj
-
120
℃
Note3
Note3
Rth(j-a)Measuring condition
・PCB：FR-4（t=1.6mm)
・Pattern Size：16mm2
2016.2.16
Page 3
VCHW1158LDS-TR
Specifications
【 Electro and Optical Characteristics 】
(Ta=25℃)
ITEM
SYMBOL CONDITIONS
MIN.
TYP.
MAX.
UNITS
Forward Voltage
VF
IF = 10mA
2.6
3.1
3.6
V
Reverse Current
IR
VR = 5V
-
-
10
μA
Luminous Intensity
IV
IF = 10mA
180
330
560
mcd
Luminous Flux
ΦV
IF = 10mA
-
1.00
-
lm
x
IF = 10mA
-
0.274
-
y
IF = 10mA
-
0.281
-
-
110
-
Notr4
Note5
Note6,7
Chromaticity coordinate
Δθx
Half Intensity Angle
Δθy
IF = 10mA
Note8
deg.
-
110
Notes 4
Tolerance ： Iv ±0.1V
Notes 5,6
Please refer to the attached sorting chart for detail ranking information.
Notes 7
Chromaticity coordinate：x,y coordinate according to CIE1931
Notes 8
Viewing Angle at 50% Iv, Δθx: Housing long side axis, Δθy: Housing short side axis
-
【 Sorting For Luminous Intensity 】
LEDs shall be sorted out into the following chart and each rank parts shall be packed separately when shipping.
IV (mcd)
Rank
markings
MIN.
MAX.
C4
180
220
C5
220
270
C6
270
330
C7
330
390
C8
390
470
C9
470
560
Note
Condition
Ta=25℃、
IF=10mA
Tolerance ：±10％
Not all iluminous intensity ranks above are selectable because selectable ranks depend on chromaticity.
2016.2.16
Page 4
VCHW1158LDS-TR
Specifications
【 Sorting chart For Chromaticity coordinates】
Chromaticity coordinates is sorted out into the following chart. Each rank parts shall be packed separately when shipping.
0.90
0.42
0.40
0.80
0.38
0.70
0.36
0.60
0.34
0.32
y
y
0.50
0.30
0.40
0.28
0.30
0.26
1A
0.24
0.20
0.22
0.10
0.20
0.00
0.00
0.10
0.20
0.30
0.40
0.50
0.60
0.70
0.80
0.90
0.18
0.18
0.20
x
0.42
0.40
9A
0.38
9B
9C
8A
8B
0.36
9D
7A
8C
7B
0.34
6A
8E
6B
0.32
7D
6C
5A
y
4B
3A
4E
3D
2B
2C
1A
5E
4D
3C
2A
0.24
5D
4C
3B
0.26
6E
5C
4A
0.28
7E
6D
5B
0.30
9E
8D
7C
1B
1C
0.22
3E
2D
2E
1D
1E
0.20
0.18
0.18
0.20
0.22
0.24
Tolerance ：±0.01
2016.2.16
0.26
0.28
0.30
0.32
0.34
0.36
0.38
0.40
0.42
x
Page 5
VCHW1158LDS-TR
Specifications
【 Sorting chart For Chromaticity coordinates】
Chromaticity coordinates is sorted out into the following chart. Each rank parts shall be packed separately when shipping.
(IF=10mA, Ta=25℃)
Rank
Left Down
x
1A
0.197
1B
0.211
1C
0.225
1D
0.239
1E
0.253
2A
0.209
2B
0.223
2C
0.236
2D
0.250
2E
0.264
3A
0.220
3B
0.234
3C
0.248
3D
0.262
3E
0.276
4A
0.232
4B
0.246
4C
0.260
4D
0.274
4E
0.288
5A
0.244
5B
0.258
5C
0.272
5D
0.286
5E
0.300
6A
0.256
6B
0.270
6C
0.284
6D
0.297
6E
0.311
7A
0.267
7B
0.281
7C
0.295
7D
0.309
7E
0.323
8A
0.279
8B
0.293
8C
0.307
8D
0.321
8E
0.335
9A
0.291
9B
0.305
9C
0.319
9D
0.333
9E
0.347
Tolerance ：±0.01
2016.2.16
y
0.242
0.233
0.224
0.215
0.205
0.260
0.251
0.242
0.232
0.223
0.278
0.269
0.259
0.250
0.241
0.296
0.286
0.277
0.268
0.258
0.313
0.304
0.295
0.285
0.276
0.331
0.321
0.312
0.303
0.293
0.348
0.339
0.330
0.320
0.311
0.366
0.357
0.347
0.338
0.329
0.384
0.374
0.365
0.356
0.346
Left Upper
x
0.209
0.223
0.236
0.250
0.264
0.220
0.234
0.248
0.262
0.276
0.232
0.246
0.260
0.274
0.288
0.244
0.258
0.272
0.286
0.300
0.256
0.270
0.284
0.297
0.311
0.267
0.281
0.295
0.309
0.323
0.279
0.293
0.307
0.321
0.335
0.291
0.305
0.319
0.333
0.347
0.303
0.317
0.331
0.345
0.359
y
0.260
0.251
0.242
0.232
0.223
0.278
0.269
0.259
0.250
0.241
0.296
0.286
0.277
0.268
0.258
0.313
0.304
0.295
0.285
0.276
0.331
0.321
0.312
0.303
0.293
0.348
0.339
0.330
0.320
0.311
0.366
0.357
0.347
0.338
0.329
0.384
0.374
0.365
0.356
0.346
0.401
0.392
0.383
0.373
0.364
Right Upper
x
0.223
0.236
0.250
0.264
0.278
0.234
0.248
0.262
0.276
0.290
0.246
0.260
0.274
0.288
0.302
0.258
0.272
0.286
0.300
0.314
0.270
0.284
0.297
0.311
0.325
0.281
0.295
0.309
0.323
0.337
0.293
0.307
0.321
0.335
0.349
0.305
0.319
0.333
0.347
0.361
0.317
0.331
0.345
0.359
0.372
y
0.251
0.242
0.232
0.223
0.214
0.269
0.259
0.250
0.241
0.231
0.286
0.277
0.268
0.258
0.249
0.304
0.295
0.285
0.276
0.267
0.321
0.312
0.303
0.293
0.284
0.339
0.330
0.320
0.311
0.302
0.357
0.347
0.338
0.329
0.319
0.374
0.365
0.356
0.346
0.337
0.392
0.383
0.373
0.364
0.355
Right Down
x
0.211
0.225
0.239
0.253
0.266
0.223
0.236
0.250
0.264
0.278
0.234
0.248
0.262
0.276
0.290
0.246
0.260
0.274
0.288
0.302
0.258
0.272
0.286
0.300
0.314
0.270
0.284
0.297
0.311
0.325
0.281
0.295
0.309
0.323
0.337
0.293
0.307
0.321
0.335
0.349
0.305
0.319
0.333
0.347
0.361
y
0.233
0.224
0.215
0.205
0.196
0.251
0.242
0.232
0.223
0.214
0.269
0.259
0.250
0.241
0.231
0.286
0.277
0.268
0.258
0.249
0.304
0.295
0.285
0.276
0.267
0.321
0.312
0.303
0.293
0.284
0.339
0.330
0.320
0.311
0.302
0.357
0.347
0.338
0.329
0.319
0.374
0.365
0.356
0.346
0.337
Page 6
VCHW1158LDS-TR
Technical Data
Spectral Distribution
Condition: Ta = 25℃, IF =10mA
1.2
Relative Intensity
1.0
0.8
0.6
0.4
0.2
0.0
380
430
480
530
580
630
680
730
780
Wavelength[nm]
Spatial Distribution
Condition: Ta = 25℃, IF=10mA
x
100
-30
30
y
X
Direc…
x direction
y direction
-60
-90
-100
100
60
50
-50
50
0
0
0
50
50
100
90
100
Relative Intensity: (%)
2016.2.16
Page 7
VCHW1158LDS-TR
Technical Data
Forward Voltage vs. Forward Current
Forward Current vs. Relative Intensity
Condition : Ta = -40℃～100℃
Condition : Ta = 25℃
2.0
60℃
0℃
85℃ 25℃ －20℃
100℃
1.5
Relative Intensity
Forward Current: IF (mA)
100
－40℃
10
1.0
CI
0.5
1
0.0
2.4
2.9
3.4
3.9
0
5
Forward Voltage: VF(V)
10
15
20
Forward Current: IF(mA)
Max. Forward Current vs. Ambient Temp.
Ambient Temp. vs. Relative Intensity
Repetition Frequency : f ≧ 10Hz
Condition : IF= 10mA
120
1.5
80
Relative Intensity
MAX Forward Current: IFMAX (mA)
100
60
Duty 10%
Duty 20%
40
Duty 50%
20
DC
0
0.5
-40
-20
0
20
40
Ambient Temp. : Ta (℃)
2016.2.16
1.0
60
80
100
-40
-20
0
20
40
60
80
100
Ambient Temp. : Ta (℃)
Page 8
VCHW1158LDS-TR
Technical Data
Ambient Temp. vs. Forward Voltage
Forward current vs. Chromaticity
Condition : IF = 1mA～20mA
Condition: Ta = 25℃
3.9
0.290
4C
0.285
20mA
3.4
IF=20mA
15mA
y
Forward Voltage: VF (V)
4B
IF=10mA
10mA
0.280
5mA
2mA
1mA
2.9
IF= 5mA
0.275
IF= 2mA
3C
IF= 1mA
2.4
-40
-20
0
20
40
60
80
0.270
0.260
100
Ambient Temp. : Ta (℃)
0.270
x
0.275
0.280
Ambient Temp. vs. Chromaticity
Max. Forward Current vs. Duty Cycle
Condition : IF = 10mA
Condition: Ta = 25℃
100
5B
4A
5C
0.290
4B
3A
4C 0℃
y
0.280
25℃
3B
-40℃
-20℃
0.270
2B
0.260
85℃
3C
100℃
0.250
0.230
4D
60℃
0.250
10
3D
2C
0.240
Forward Current : IFRM MAX. (mA)
0.300
1
0.260
x
2016.2.16
0.265
0.270
0.280
0.290
1
10
100
Duty cycle: D (%)
Page 9
Soldering condition
VCHW1158LDS-TR
【Soldering Precaution】
(acc.to EIAJ-4701/300)
1.
Heat stress during soldering will influence the reliability of LEDs, however that effect will vary on heating
method. Also, if components of varying shape are soldered together, it is recommended to set the soldering
pad temperature according to the component most vulnerable to heat (e.g., surface mount LED).
2.
LED parts including the resin are not stable immediately after soldering ( when they are not at room
temperature), any mechanical stress may cause damage to the product. Please avoid such stress after
soldering, especially stacking of the boards which may cause the boards to warp and any other types of
friction with hard materials.
3.
Recommended temperature profile for the Reflow soldering is listed as the temperature of the resin surface.
Temperature distribution varies on heating method, PCB material, other components in the assembly, and
mounting density .
Please do not repeat the heating process in Reflow process more than twice.
【 Recommended Reflow Soldering Condition 】
Peak Temperature
(Soldering ）
260℃ MAX.
+1.5～+5℃/s
-1.5～-5℃/s
230℃ MAX.
120s MAX.
（ Pre-heating）
150℃～180℃
40s MAX.
Note 1 Temperature Profile for the reflow should be set to the surface temperature of resin which is on the
of LED. This should be the maximum temperature for soldering. Lowering the heating temperature and
decreasing heating time is very effective in achieving higher reliability.
top
Note 2 The reflow soldering process should be done up to twice(2 times Max). When second process is
performed, interval between first and second process should be as short as possible to prevent absorption of
moisture to resin of LED. The second soldering process should not be done until LEDs have returned to room
temperature (by nature-cooling) after first soldering process.
2016.2.16
Page 10
Soldering condition
VCHW1158LDS-TR
4.
If soldering manually, Stanley recommends using a soldering iron equipped with temperature control. During
the actual soldering process, make sure that the soldering iron never touches the LED itself, and avoid the
LED's electrode heating temperature reaching above the heating temperature of the solder pad. All repairs
must be performed only once in the same spot, and please avoid reusing components.
5.
In soldering process, immediately after iron tip is cleaned, please make sure that the soldering iron reaches the
appropriate temperature before using. Also, please avoid applying any types of pressure to the soldered
components before the solder has been cooled and hardened, as it may deteriorate solder performance and
solder quality.
【Recommended Manual Soldering Condition】
6.
Temperature of Iron Tip
350℃MAX.
Soldering Duration, Time
3sec.Max., 1 time
When using adhesive material for tentative fixatives, thermosetting resin or Ultraviolet radiation (UV) setting
resin with heat shall be recommended.
《The curing condition, Temperature:150℃Max./Time:120sec.Max.》
6.
Flow soldering (dip soldering) is not recommended for this product.
7.
Isopropyl alcohol is recommended for cleaning. Some chemicals, including Freon substitute detergent could
corrode the lens or the casing surface, which cause discoloration, cloud, crack and so on. Please review the
reference chart below for cleaning. If water is used to clean (including the final cleaning process), please use
pure water (not tap water), and completely dry the component before using.
2016.2.16
Chemical
Adaptability
Ethyl Alcohol
○
Isopropyl Alcohol
○
Pure water
○
Trichloroethylene
×
Chlorothene
×
Acetone
×
Thinner
×
Page 11
Handling Precaution
VCHW1158LDS-TR
【 For Electric Static Discharge ( ESD) 】
This kind of LED lamp is highly sensitive to surge voltage generated by the On/Off status change and
discharges of static electricity through frictions with synthetic materials, which may cause severe damage to the
die or undermine its reliability. Damaged products may experience conditions such as extremely high reverse
voltage, or a decrease of forward rise voltage, deteriorating its optical characteristic.
Stanley products are designed to withstand up to 1,000V under the EIAJ ED-4701/300 Test ♯304 (HBM), and
are packed with anti-static components. However, the following precautions and measures are vital in ensuring
product quality during shipment.
EIAJ ED-4701/300（304/HBM） Electrification model: C=100pF, R2=1.5KΩ
1. Electrification/Static Electricity protection
Stanley recommends the following precautions in order to avoid product (die) damage from static electricity ,
when an operator and other materials electrified by friction coming in contact with the product.
① Do not place electrified non-conductive materials near the LED product.
Avoid LED products from coming into contact with metallic materials.( Should the metallic material be
electrified , the sudden surge voltage will most likely damage the product.)
② Avoid a working process which may cause the LED product to rub against other materials.
③ Install ground wires for any equipment, where they can be installed, with measures to avoid static
electricity surges.
④ Prepare a ESD protective area by placing a Conductive Mattress (1MΩ MAX.) and Ionizer to remove any
static electricity.
⑤ Operators should wear a protective wrist-strap.
⑥ Operators should wear conductive work-clothes and shoes.
⑦ To handle the products directly, Stanley recommends the use of ceramic, and not metallic, tweezers.
2. Working Environment
① A dry environment is more likely to cause static electricity. Although a dry environment is ideal for storage
state of LED products, Stanley recommends an environment with approximately 50% humidity after the
soldering process.
② Recommended static electricity level in the working environment is 150V, which is the same value as
Integrated Circuits (which are sensitive to static electricity).
2016.2.16
Page 12
Handling Precaution
VCHW1158LDS-TR
【 Other Precautions 】
1.
Stanley LED Lamps have semiconductor characteristics and are designed to ensure high reliability. However,
the performance may vary depending on usage conditions
2.
Absolute Maximum Ratings are set to prevent LED lamps from failing due to excess stress( temperature,
current, voltage, etc.). Usage conditions must not exceed the ratings for a moment, nor do reach one item of
absolute maximum ratings simultaneously.
3.
In order to ensure high reliability from LED Lamps, variable factors that arise in actual usage conditions
should be taken it to account for designing. ( Derating of TYP., MAX Forward Voltage, etc.)
4.
Please insert Straight Protective Resistors into the circuit in order to stabilize LED operation and to prevent
the device from igniting due to excess current.
5.
Please avoid the stick of foreign material because molding resin in the products have adhesiveness. Also
please don't touch lens portion.
6.
Please check the actual performance in the assembly because the Specification Sheets are described for
LED device only.
7.
Please refrain from looking directly at the light source of LED at high output, as it may harm your vision.
8.
The products are designed to operate without failure in recommended usage conditions. However, please take
the necessary precautions to prevent fire, injury, and other damages should any malfunction or failure arise.
9.
The products are manufactured to be used for ordinary electronic equipment. Please contact our sales staff
beforehand when exceptional quality and reliability are required, and the failure or malfunction of the
products might directly jeopardize life or health ( such as for airplanes, aerospace, transport equipment,
medical applications, nuclear reactor control systems and so on).
10. The formal specification sheets shall be valid only by exchange of documents signed by both parties.
2016.2.16
Page 13
Handling Precaution
VCHW1158LDS-TR
【 Handling Precautions for Product Mounting 】
＜Recommendation＞
1. Picking up point with nozzle: Lamp housing of the product (
area) (Shown below)
The picking up point should be within lamp housing portion, because the silicone resin used for the lens is soft.
(If the nozzle makes contact with the lens, the products might be destroyed)
Non allowed picking up area (Lens portion)
Load : less than 10N
(to avoid the product breaking)
Picking up point (Lamp housing portion)
Please adjust the load, the pick up point, the nozzle diameter, etc. before mounting because the
over load can cause the breakage of the lamp housing.
2. Recommended Nozzle shape
Outer diameter: Min. Φ 2mm
Inner diameter: Φ 1mm
2016.2.16
Page 14
Packaging Specifications
VCHW1158LDS-TR
This product is baked (moisture removal) before packaging, and is shipped in moisture-proof packaging (as shown
below) to minimize moisture absorption during transportation and storage. However, with regard to storing the
products, Stanley recommends the use of dry-box under the following conditions is recommended. Moisture-proof
bag as the packaging is made of anti-static material but packaging box is not.
【Recommended Storage Condition / Products Warranty Period 】
Temperature
+5～30℃
Humidity
Under 70%
In the case of the package unopened , 6 months under 【 Recommended Storage Condition 】.
Please avoid rapid transition from low temp. condition to high temp. condition
and storage in corroding and dusty environment.
【Time elapsed after Package Opening】
The package should not be opened until immediately prior to its use, and please keep the time frame between
package opening and soldering which is 【maximum 168h】.
If the device needs to be soldered twice, both soldering operations must be completed within the 168h.
If any components should remain unused, please reseal the package and store them under the conditions described
in the 【 Recommended Storage Condition 】 above.
This product must be required to perform baking process (moisture removal) for at least 48h and not
exceed for 72h, at 60±5 degrees Celsius if following conditions apply.
1. In the case of silica gel (blue) which indicates the moisture level within the package, changes or loses its
blue color.
2. In the case of time passes for 168h after the package is opened once.
Baking process should be performed after LED having been taken out of the package.
Baking may be performed in the tape-reel form , however if it is performed with the reel stacked over one another,
it may cause deformation of the reels and taping materials and later obstruct mounting. Please handle only once it
has returned to room temperature. Provided that, baking process shall be 2 times MAX.
2016.2.16
Page 15
VCHW1158LDS-TR
Packaging Specification
【Moisture-proof Packaging Specification】
Fastener for re-storage
after opening bag.
①
Customer's opening position.
Product Label
A
Heat Sealing position (after product being put in)
(Desiccant with indicator for
moisture level is enclosed.)
NO.
PART NAME
MATELRIAL
REMARKS
①
Moisture-proof bag
with Aluminum layer
PET+Al+PE
with ESD
protection
Flow chart：Package
to Mounting
【Flow Chart-package
OpeningOpening
to Mounting】
Stored under recommended condition
Moisture-proof package first time opening
Allowable leaving time exceeded (*)
Yes
No
Discoloration of silica gel
Yes
No
Baking LED under recommended condition
Product Mounting
Unused-product remained
Yes
Return to moisture-proof package and seal
No
Allowable leaving time means the
maximum allowable leaving time after
opening package, which depends on
each LED type.
The allowable leaving time should be
calculated form the first opening of
package to the time when soldering
process is finished.
When judging if the allowable leaving
time has exceeded or not, please
subtract the soldering time. The
allowable leaving time after reopening
should be calculated form the first
opening of package, or from the time
when baking process is finished.
Finished
Reopen the moisture-proof package
2016.2.16
Page 16
Packaging Specifications
VCHW1158LDS-TR
【 Packing box 】
(RoHS・ELV Compliant)
Box TYPE
Outline dimension
L × W × H (mm)
Capacity of the box
Type A
280 × 265 × 45
3 reel
Type B
310 × 235 × 265
15 reel
Type C
440 × 310 × 265
30 reel
The above measure is all the reference value.
Shipping box is selected out of the above table by shipping quantity.
Type A
Material / box ： Cardboard C5BF
2016.2.16
Type B,C
Material / box ： Cardoard K5AF
Partition ： Cardoard K5BF
NO.
PART NAME
MATERIAL
REMARKS
②
Packing Box
Corrugated
Cardbord
without ESD
protection
Page 17
Packaging Specifications
VCHW1158LDS-TR
【 Label Specification】
( acc.to JIS-X0503(Code-39)
A
Product label
A. Parts number
B. B. Bar-code for parts number
C. Parts code (In-house identification code for each parts number)
D. Packed parts quantity
E. Bar-Code for packed parts quantity
F. Lot number & Rank
(refer to Lot Number Notational System for details )
G. Bar-Code for Lot number & Rank
B
Opto device label
A. Custmer Name
B. Parts Type
C. Parts Code
D. Parts Number
E. Packed Parts Quantity
F. Carton Number
G. Shipping Date
H. Bar-Code for In-house identification Number
Bar-code font : acc.to Code-39(JIX0503)
2016.2.16
Page 18
Taping and Reel Specifications
VCHW1158LDS-TR
(acc.to JIS-C0806-03）
【Appearance】
Direction to take out
Note
"-TR" means cathode side of LEDs should be placed on the sprocket-hole side.
Items
Cover-tape
Specifications
Remarks
Cover-tape shall be longer
than 300mm without carrier-tape
The end of cover-tape shall be
held with adhesive tape.
Empty pocket shall be more than
25 pieces.
Please refer to the above figure
for Taping & reel orientation .
Empty pocket shall be more than
40 pieces.
The end of taping shall be
inserted into a slit of the hub.
Leader area
Carrier-tape
Trailer area
2016.2.16
Page 19
Taping and Reel Specifications
VCHW1158LDS-TR
(acc.to JIS-C0806-03）
【Qty. per Reel】
3,000parts/reel
Minimum Qty. per reel might be 500 parts when getting less than 3,000 parts. In such case, parts
of 500-unit-qty. Shall be packed in a reel and the qty. shall be identified on the label
【Mechanical strength】
Cover-tape adhesive strength shall be 0.1～1.0N ( An angle between carrier-tape and cover-tape shall be 170
deg. ) .
Both tapes shall be so sealed that the contained parts will not come out from the tape when it is bent at a radius
of 15mm.
【Others】
Reversed-orientation, Up-side down placing, side placing and out of spec. parts mixing shall not be held.
Max. qty. of empty pocket per reel shall be defined as follows.
2016.2.16
Qty./reel
Max. qty. of empty pocket
Remarks
500
1
-
1,000
1
-
1,500
1
-
2,000
2
No continuance
2,500
2
No continuance
3,000
3
No continuance
Page 20
Taping and Reel Specifications
VCHW1158LDS-TR
Unit
：mm
(acc.to JIS-C0806-03）
【Taping Dimensions】
①
②
【Reel Dimensions】
2016.2.16
③
NO.
PART NAME
REMARKS
①
Carrier-tape
with EDS protection
②
Cover-tape
with EDS protection
③
Carrier-reel
with EDS protection
Page 21
Lot Number Notational System
① ②
③
④
⑤
VCHW1158LDS-TR
⑥
⑦
⑧
⑨
① - 1digit ： Production Location (Mark identify alphabet)
② - 1digit ： Production Year (Last digit of production Year
2009→9,2010→0,2011→1,･･･)
③ - 2digits ： Production Month (Jan. to Sep. ,should be 01,02,03,･････)
④ - 2digits ： Production Date
⑤ - 3digits ： Serial Number
⑥ - 2digits ： Tape and Reel following Number
⑦ - 2digits ： Luminous Intensity Rank.
(If luminous intensity rank is 1 digit, "-" shall be dashed on the place for the second digit.
If there is no identified intensity rank, "- -" is used to indicate.)
⑧ - 2digits ： Chromaticity Rank
(If chromaticity rank is 1 digit, "-" shall be dashed on the place for the second digit.
If there is no identified rank, "- -" is used to indicate.)
⑨ - 1digit ： Option Rank (Stanley normally print "-" to indicate)
2016.2.16
Page 22
Correspondence to RoHS・ELV instruction
VCHW1158LDS-TR
This product is in compliance with RoHS・ELV.
Prohibition substance and it's criteria value of RoHS・ELV are as follows.
・RoHS instruction …… Refer to following (1)～(6).
・ELV instruction ………. Refer to following (1)～(4).
2016.2.16
Substance Group Name
Criteria Value
(1)
Lead and its compounds
1,000ppm Max
(2)
Cadmium and its compounds
100ppm Max
(3)
Mercury and its compounds
1,000ppm Max
(4)
Hexavalent chromium
1,000ppm Max
(5)
PBB
1,000ppm Max
(6)
PBDE
1,000ppm Max
Page 23
Reliability Testing Result
VCHW1158LDS-TR
1. Reliability Testing Result
Test Item
Room Temperature Operating Life
High Temperature Operating Life
Low Temperature Operating Life
Wet High Temperature Operating Life
High Temperature Storage Life
Low Temperature Storage Life
Wet High Temperature Storage Life
Thermal Shock
Thermal Shock Operating
Cycled Temperature Humidity
Operating Life
Resistance to Reflow Soldering
Electrostatic Discharge(ESD)
※
Vibration, Variable Frequency
Reference
Standard
EIAJ ED4701
/100(101)
EIAJ ED4701
/100(101)
EIAJ ED4701
/100(101)
EIAJ ED4701
/100(102)
EIAJ ED4701
/200(201)
EIAJ ED4701
/200(202)
EIAJ ED4701
/100(101)
EIAJ ED4701
/100(105)
EIAJ ED4701
/100(105)
EIAJ ED4701
/200(203)
EIAJ ED4701
/300(301)
Test Condition
Failure
Ta=25℃ IF=20mA
1,000h
0 / 20
Ta=85℃ IF=20mA
1,000h
0 / 20
Ta=-40℃ IF=20mA
1,000h
0 / 20
Ta=60℃ Rh=90% IF=20mA
1,000h
0 / 20
Ta=120℃
1,000h
0 / 20
Ta=-40℃
1,000h
0 / 20
Ta=60℃ Rh=90%
1,000h
0 / 20
Ta=-40℃ ～120℃
(each 15min)
1,000
cycles
0 / 20
Ta=-40℃(OFF) ～85℃(IF=10mA ON)
(each 15min)
1,000
cycles
0 / 20
Ta=-30℃ ～ 80℃ 95% 8h/cycle
IF=10mA 5min on-off
30
cycles
0 / 20
Moisture Soak ： 30℃ 70% 168h
Preheating ： 150～180℃ 120sec MAX.
Soldering ： 260℃ peak
2times
0 / 20
EIAJ ED4701
/300(304)
C=100pF R2=1.5kΩ ±2,000V
once of
each
polarity
0 / 20
EIAJ ED4701
/400(403)
98.1m/s2(10G) 100～2,000Hz 20min XYZ
direction
2h of each
direction
0 / 20
※Reference Test
2. Failure Criteria
2016.2.16
Item
Symbol
Condition
Failure Criteria
Luminous Intensity
Iv
IF=10mA
Testing Min. Value ＜ Standard Min. Value × 0.5
Forward Voltage
VF
IF=10mA
Testing Max. Value ≧ Standard Max. Value × 1.2
Reverse Current
IR
VR=5V
Testing Max. Value ≧ Standard Max. Value × 2.5
Cosmetic Appearance
-
-
Notable discoloration, deformation and cracking
Page 24
VCHW1158LDS-TR
Special Notice to Customers Using the Products and
Technical Information Shown in This Data Sheet
1) The technical information shown in the data sheets are limited to the typical characteristics and circuit
examples of the referenced products. It does not constitute the warranting of industrial property nor the
granting of any license.
2) For the purpose of product improvement, the specifications, characteristics and technical data described in
the data sheets are subject to change without prior notice. Therefore it is recommended that the most
updated specifications be used in your design.
3) When using the products described in the data sheets, please adhere to the maximum ratings for operating
voltage, heat dissipation characteristics, and other precautions for use. We are not responsible for any
damage which may occur if these specifications are exceeded.
4) The products that have been described to this catalog are manufactured so that they will be used for the
electrical instrument of the benchmark (OA equipment, telecommunications equipment, AV machine, home
appliance and measuring instrument).
The application of aircrafts, space borne application, transportation equipment, medical equipment and nuclear
power control equipment, etc. needs a high reliability and safety, and the breakdown and the wrong operation might
influence the life or the human body. Please consult us beforehand if you plan to use our product for the usages of
aircrafts, space borne application, transportation equipment, medical equipment and nuclear power control
equipment, etc. except OA equipment, telecommunications equipment, AV machine, home appliance and
measuring instrument.
5) In order to export the products or technologies described in this data sheet which are under the
“Foreign Exchange and Foreign Trade Control Law,” it is necessary to first obtain an export permit from the
Japanese government.
6) No part of this data sheet may be reprinted or reproduced without prior written permission from Stanley
Electric Co., Ltd.
7) The most updated edition of this data sheet can be obtained from the address below:
http://www.stanley-components.com/en/
2016.2.16
Page 25
工商网监
湘ICP备2023018690号
