VFHD1104P-4BY2B-TR

Standard Product Reference Sheet VFHD1104P-4BY2B-TR Features Package 1608 Size, water clear lens, Emitting color : Yellow Green Outline Dimensions 1.64 x 0.84 x 1.15mm ( L x W x H ) Product features ・High brightness by lens design ・Moisture sensitive level : 3 (IPC/JEDEC J-STD-020D) ・Lead–free soldering compatible ・RoHS2 compliant Recommended Applications ・Indicator lighting for Automotive use, Various indicators, etc. 2013.6.28 Page : 1 Outline Dimensions VFHD1104P-4BY2B-TR Unit Weight Tolerance NO. PART NAME MATERIAL QTY. ① LED die AlGaInP 1 ② Mold Resin Epoxy Resin 1 ③ Substrate Glass Fabrics 1 ④ Electrode Au/Ni/Cu 2 :mm :1.7mg :±0.1 Recommended Pad Unit :mm 2018.10.24 Page : 2 VFHD1104P-4BY2B-TR Specifications 【 Product Overview 】 DIE MATERIAL AlGaInP EMITTING COLOR Yellow Green LENS COLOR (EMITTING AREA) Water Clear 【 Absolute Maximum Ratings 】 (Ta=25℃) ITEM SYMBOL MAXIMUM RATINGS UNITS Power Dissipation Pd 78 mW Forward Current IF 30 mA Repetitive Peak Forward Current "1ms,1/20duty" IFRM 100 mA IF Derate Linearly from "75℃" ΔIF 1.00 mA/℃ IFRM Derate Linearly from "75℃" ΔIFRM 3.33 mA/℃ Reverse Voltage VR 5 V Operating Temperature Topr -40 ～ +100 ℃ Storage Temperature Tstg -40 ～ +105 ℃ Electrostatic Discharge Threshold "HBM" ESD 1,000 V Notes 1 Soldering　Temperature "Reflow Soldering" Tsld 260 ℃ Notes 2 Notes 1 ESD testing method : EIAJ4701/300(304) Human body model(HBM) 1.5KΩ, 100pF Notes 2 Please refer to psge 8, "Soldering conditions". 【 Thermal Characteristics 】 (Ta=25℃) ITEM Thermal Resistance 【Junction - Ambient】 Thermal Resistance 【Junction - Solder point】 Junction Temperature Notes 3 2018.1.16 SYMBOL TYP. MAX. UNITS Rth(j-a) 550 - ℃/W Rth(j-s) 350 - ℃/W Tj - 105 ℃ Notes 3 Rth(j-a)Measurement condition ・PCB：FR4（t=1.6mm) ・Pattern Size：16mm2 Page : 3 VFHD1104P-4BY2B-TR Specifications 【 Electro and Optical Characteristics 】 (Ta=25℃) ITEM SYMBOL CONDITIONS MIN. TYP. MAX. UNITS Forward Voltage VF IF = 20mA 1.7 1.9 2.5 V Reverse Current IR VR = 5V - - 10 μA Luminous Intensity IV IF = 20mA 68 100 150 mcd Luminous Flux φV IF = 20mA - 200 - mlm Peak Wavelength λp IF = 20mA - 575 - nm Dominant Wavelength λd IF = 20mA 570 573 576 nm Spectral Line Half Width Δλ IF = 20mA - 15 - nm Half Intensity Angle 2θ1/2 IF = 20mA - 80 - nm Note: Above Luminous Intensity (IV) values and Dominant wavelength (λd) values are the setup value of　the selection machine．【Tolerance : IV…±10%,λd…±1nm】 【 Sorting For Luminous Intensity and Dominant Wavelength 】 LEDs shall be sorted out into the following ranks of Luminous Intensity and Dominant Wavelength. Dominant Wavelength (λd) Rank Luminous Intensity (Iv) Rank Rank IV (mcd) MIN. MAX. BY 68 82 BZ 82 100 C1 100 120 C2 120 150 Conditions IF =20mA Ta=25℃ Rank λd (nm) MIN. MAX. B 570 573 C 573 576 Conditions IF =20mA Ta=25℃ Above Luminous Intensity (Iv) values and Dominant Wvelength (λd) values are the setup value of the selection machine.【Tolerance : Iv…±10%, λd…±1nm】 2013.6.28 Page : 4 VFHD1104P-4BY2B-TR Technical Data Spectral Distribution Condition: Ta = 25℃, IF = 20mA 1.2 Relative Intensity 1.0 0.8 0.6 0.4 0.2 0.0 380 430 480 530 580 630 680 730 780 Wavelength: (nm) Spatial Distribution Condition: Ta = 25℃, IF= 20mA 0 -30 x 30 y X direction Y direction 60 -60 -90 100 2013.6.28 90 50 0 Relative Intensity: (%) 50 100 Page : 5 VFHD1104P-4BY2B-TR Technical Data Forward Voltage vs. Forward Current Ambient Temperature vs. Forward Voltage Condition : Ta = 25℃ Condition: IF = 20mA 100 2.4 Forward Voltage: VF (V) Forward Current: I F (mA) 2.3 10 2.2 2.1 2.0 1.9 1.8 1.7 1 -40 1.5 1.6 1.7 1.8 1.9 2.0 2.1 2.2 2.3 2.4 2.5 -20 0 20 40 60 80 100 Forward Voltage: VF(V) Ambient Temperature: Ta (℃) Forward Current vs. Relative Intensity Ambient Temperature vs. Relative Intensity Condition: Ta = 25℃ Condition: IF = 20mA 2.0 10.0 Relative Intensity Relative Intensity 1.5 1.0 CI 1.0 0.5 0.1 0.0 0 5 10 15 20 Forward Current: IF (mA) 2013.6.28 25 30 -40 -20 0 20 40 60 80 100 Ambient Temperature: Ta (℃) Page : 6 VFHD1104P-4BY2B-TR Technical Data Forward Current vs. Dominant Wavelength Ambient Temperature vs. Dominant Wavelength Condition: Ta = 25℃ Condition: IF = 20mA 574 Dominant Wavelength : λd (nm) Dominant Wavelength : λd (nm) 575 573 572 571 570 0 5 10 15 20 25 580 579 578 577 576 575 574 573 572 571 570 569 568 567 566 -40 30 -20 0 20 40 60 80 Ambient Temperature: Ta (℃) Forward Current: IF (mA) CI Ambient Temperature vs. Max. Forward Current Duty Cycle vs. Max. Forward Current Condition: Ta = 25℃ Maximum Forward Current : IFRM MAX. (mA) Maximum Forward Current : IFRM MAX. (mA) Pulse Width：tw≦1ms , Repetition Frequency: f ≧ 50Hz 120 100 Duty=5% 80 Duty=10% 60 Duty=20% 40 Duty=50% DC 20 10 1 0 -40 -20 0 20 40 60 Ambient Temperature: Ta (℃) 2013.6.28 100 80 100 120 1 10 100 Duty cycle: (%) Page : 7 Soldering condition VFHD1104P-4BY2B-TR 【Soldering Precaution】 (acc.to:EIAJ-4701/300) 1. Heat stress during soldering will influence the reliability of LEDs, however that effect will vary on heating method. Also, if components of varying shape are soldered together, it is recommended to set the soldering pad temperature according to the component most vulnerable to heat (e.g., surface mount LED). 2. LED parts including the resin are not stable immediately after soldering ( when they are not at room temperature), any mechanical stress may cause damage to the product. Please avoid such stress after soldering, especially stacking of the boards which may cause the boards to warp and any other types of friction with hard materials. 3. Recommended temperature profile for the Reflow soldering is listed as the temperature of the resin surface. Temperature distribution varies on heating method, PCB material, other components in the assembly, and mounting density. Please do not repeat the heating process in Reflow process more than twice. 【Recommended Reflow Soldering Condition】 Peak Temperature (Soldering ） 260℃ MAX. +1.5～+5℃/s -1.5～-5℃/s 230℃ MAX. 90~120sec （ Pre-heating ） 150℃～180℃ 40sec MAX. Notes 1 Temperature Profile for the reflow should be set to the surface temperature of resin which is on the top of LED. This should be the maximum temperature for soldering. Lowering the heating temperature and decreasing heating time is very effective in achieving higher reliability. Notes 2 The reflow soldering process should be done up to twice(2 times Max). When second process is performed, interval between first and second process should be as short as possible to prevent absorption of moisture to resin of LED. The second soldering process should not be done until LEDs have returned to room temperature (by nature-cooling) after first soldering process. 2018/10/29 Page : 8 Soldering condition VFHD1104P-4BY2B-TR 4. If soldering manually, Stanley recommends using a soldering iron equipped with temperature control. During the actual soldering process, make sure that the soldering iron never touches the LED itself, and avoid the LED's electrode heating temperature reaching above the heating temperature of the solder pad. All repairs must be performed only once in the same spot, and please avoid reusing components. 5. In soldering process, immediately after iron tip is cleaned, please make sure that the soldering iron reaches the appropriate temperature before using. Also, please avoid applying any types of pressure to the soldered components before the solder has been cooled and hardened, as it may deteriorate solder performance and solder quality. 【Recommended Manual Soldering Condition】 Temperature of Iron Tip 350℃MAX. Soldering Duration, Time 3sec.Max.,1 time 6. When using adhesive material for tentative fixatives, thermosetting resin or Ultraviolet radiation (UV) setting resin with heat shall be recommended. 《The curing condition, Temperature:150℃Max./Time:120sec.Max.》 7. Flow soldering (dip soldering) is not recommended for this product. 8. Isopropyl alcohol is recommended for cleaning. Some chemicals, including Freon substitute detergent could corrode or affect the optical characteristics of the lens or the casing surface. Please review the reference chart below for cleaning. Cleaning with ultrasonic shall not be recommended. Cleaning agents Recommended / Not recommended Isopropyl alcohol Ethyl　alcohol Pure water Trichloroethylene Chlorothene Acetone Thinner 2018/10/29 x x x x Recommended Recommended Recommended Not recommended Not recommended Not recommended Not recommended Page : 9 Handling Precaution VFHD1104P-4BY2B-TR 【 Other Precautions 】 1. Stanley LED Lamps have semiconductor characteristics and are designed to ensure high reliability. However, the performance may vary depending on usage conditions. 2. Absolute Maximum Ratings are set to prevent LED lamps from failing due to excess stress( temperature, current, voltage, etc.). Usage conditions must not exceed the ratings for a moment, nor do reach one item of absolute maximum rating s simultaneously. 3. In order to ensure high reliability from LED Lamps, variable factors that arise in actual usage conditions should be taken it to account for designing. ( Derating of TYP., MAX Forward Voltage, etc.) 4. Please insert Straight Protective Resistors into the circuit in order to stabilize LED operation and to prevent the device from igniting due to excess current. 5. Please avoid using the products with materials and products that contain sulfur and chorine element which will decrease the reliability of LED. Please keep LED in desiccator to protect them from corrosive gas regardless of whether mounting is finished or not. Also please make sure there is no gas occurs around or gas inflows from outside when using LED. 6. Please check the actual performance in the assembly because the Specification Sheets are described for LED device only. 7. Please refrain from looking directly at the light source of LED at high output, as it may harm your vision. 8. The products are designed to operate without failure in recommended usage conditions. However, please take the necessary precautions to prevent fire, injury, and other damages should any malfunction or failure arise 9. The products are manufactured to be used for ordinary electronic equipment. Please contact our sales staff beforehand when exceptional quality and reliability are required, and the failure or malfunction of the products might directly jeopardize life or health ( such as for airplanes, aerospace, transport equipment, medical applications, nuclear reactor control systems and so on). 10. The formal specification sheets shall be valid only by exchange of documents signed by both parties. 2013.6.28 Page : 10 Packaging Specifications VFHD1104P-4BY2B-TR This product is baked (moisture removal) before packaging, and is shipped in moisture-proof packaging (as shown below) to minimize moisture absorption during transportation and storage. However, with regard to storing the products, Stanley recommends the use of dry-box under the following conditions is recommended. Moisture-proof bag as the packaging is made of anti-static material but packaging box is not. 【Recommended Storage Condition / Products Warranty Period 】 Temperature +5～30℃ Humidity Under 70% In the case of the package unopened , 6 months under 【 Recommended Storage Condition 】. Please avoid rapid transition from low temp. condition to high temp. condition and storage in corroding and dusty environment. 【Time elapsed after Package Opening.】 The package should not be opened until immediately prior to its use, and please keep the time frame between package opening and soldering which is 【maximum 168h】. If the device needs to be soldered twice, both soldering operations must be completed within the 168h. If any components should remain unused, please reseal the package and store them under the conditions described in the 【 Recommended Storage Condition 】 above. This product must be required to perform baking process (moisture removal) for at 48( MIN.).∼72h (MAX.) , at 60 +/- 5 degrees Celsius if following conditions apply. 1. In the case of silica gel (blue) which indicates the moisture level within the package, changes or loses its blue color. 2. In the case of time passes for 168h after the package is opened once. Baking process should be performed after LED having been taken out of the package. Baking may be performed in the tape-reel form , however if it is performed with the reel stacked over one another, it may cause deformation of the reels and taping materials and later obstruct mounting. Please handle only once it has returned to room temperature. Provided that, baking process shall be 2 times MAX. 2013.6.28 Page : 11 Packaging Specification VFHD1104P-4BY2B-TR 【Moisture-proof Packaging Specification】 Fastener for re-storage after opening bag. Customer's opening position. A Product Label Heat Sealing position (after product being put in) Desiccant with indicator for moisture level is enclosed. 1 NO. PART NAME MATELRIAL REMARKS ① Moisture-proof bag with Aluminum layer PET+Al+PE with ESD protection Flow chart：Package Opening to Mounting 【Flow Chart-package Opening to Mounting】 Stored under recommended condition Moisture-proof package first time opening Allowable leaving time exceeded (*) Yes No Discoloration of silica gel Yes No Baking LED under recommended condition Product Mounting Allowable leaving time means the maximum allowable leaving time after opening package, which depends on each LED type. The allowable leaving time should be calculated form the first opening of package to the time when soldering process is finished. When judging if the allowable leaving time has exceeded or not, please subtract the soldering time. The allowable leaving time after reopening should be calculated form the first opening of package, or from the time when baking process is finished. Unused-product remained Yes Return to moisture-proof package and seal No Finished Reopen the moisture-proof package 2013.6.28 Page : 12 Packaging Specifications VFHD1104P-4BY2B-TR 【 Packing box 】 ( RoHS2 / ELV Compliant ) Box TYPE Outline dimension L × W × H (mm) Capacity of the box Type A 280 × 265 × 45 3 reels Type B 310 × 235 × 265 15 reels Type C 440 × 310 × 265 30 reels The above measure is all the reference value. The box is selected out of the above table by shipping quantity. B ② Type A Material / box ： Cardboard C5BF 2018.10.24 Type B,C Material / box ： Cardboard K5AF Partition ： Cardboard K5AF No. PART NAME MATERIAL REMARKS ② Packing Box Corrugated Cardboard without ESD protection Page : 13 Packaging Specifications VFHD1104P-4BY2B-TR 【Label Specification】 ( acc.to JIS-X0503(Code-39) ) A Product label A. Parts number B. Bar-code for parts number C. Parts code (In-house identification code for each parts number) D. Packed parts quantity E. Bar-Code for packed parts quantity F. Lot number & Rank (refer to Lot Number Notational System for details ) G. Bar-Code for Lot number & Rank B Opto device label A. Customer Name B. Parts Type C. Parts Code D. Parts Number E. Packed Parts Quantity F. Carton Number G. Shipping Date H. Bar-Code for In-house identification Number Bar-code font : acc.to Code-39(JIS-X0503) 2013.6.28 Page : 14 Taping and Reel Specifications VFHD1104P-4BY2B-TR (acc.to JIS-C0806-03) 【Appearance】 Note "-TR" means cathode side of LEDs should be placed on the sprocket-hole side. Items Cover-tape Leader area Carrier-tape Trailer area 2013.6.28 Specifications Remarks Cover-tape shall be longer than 320mm without carrier-tape The end of cover-tape shall be held with adhesive tape. Empty pocket shall be more than 25 pieces. Please refer to the above figure for Taping & reel orientation . Empty pocket shall be more than 40 pieces. The end of taping shall be inserted into a slit of the hub. Page : 15 Taping and Reel Specifications VFHD1104P-4BY2B-TR (acc.to JIS-C0806-03) 【Qty. per Reel】 3,000parts/reel Minimum Qty. per reel might be 500 parts when getting less than 3,000 parts. In such case, parts of 500-unit-qty. shall be packed in a reel and the qty. shall be identified on the label 【Mechanical strength】 Cover-tape adhesive strength shall be 0.1～1.0N ( An angle between carrier-tape and cover-tape shall be170 deg. ) Both tapes shall be so sealed that the contained parts will not come out from the tape when it is bent at a radius of 15mm. 【Others】 Reversed-orientation, Up-side down placing, side placing and out of spec. parts mix shall not be held. Max qty. of empty pocket per reel shall be defined as follows. 2013.6.28 Qty./reel Max. qty. of empty pocket Remarks 500 1 - 1,000 1 - 1,500 1 - 2,000 2 No continuance 2,500 2 No continuance 3,000 3 No continuance Page : 16 Taping and Reel Specifications VFHD1104P-4BY2B-TR (acc.to JIS-C0806-03) Unit :mm 【Taping Dimensions】 ① ② 【Reel Dimensions】 ③ 9±0.2 11.4±0.1 2013.6.28 NO. PART NAME REMARKS ① Carrier-tape Conductive Grade ② Cover-tape Anti-Static Grade ③ Carrier-reel Conductive Grade Page : 17 Lot Number Notational System ① ② ③ ④ ⑤ VFHD1104P-4BY2B-TR ⑥ ⑦ ⑧ ⑨ ① - 1digit ： Production Location (Mark identify alphabet) ② - 1digit ： Production Year (Last Digit of Production Year shall be indicate as 2020→0, 2021→1, 2022→2,･･･) ③ - 2digits ： Production Month (Jan. to Sep. ,shall be indicated as 01,02,03,･････) ④ - 2digits ： Production Date ⑤ - 3digits ： Serial Number ⑥ - 2digits ： Tape and Reel following Number ⑦ - 2digits ： Luminous Intensity Rank. (If luminous intensity rank is 1 digit, "-" shall be dashed on the place for the second digit. If there is no identified rank, "- -" shall be used to indicate.) ⑧ - 2digits ： Color Rank (If chromaticity rank is 1 digit, "-" shall be dashed on the place for the second digit. If there is no identified rank, "- -" shall be used to indicate.) ⑨ - 1digit ： Option Rank (Stanley normally print "-" to indicate.) 2013.6.28 Page : 18 Correspondence to RoHS2 / ELV instruction VFHD1104P-4BY2B-TR This product is in compliance with RoHS2 / ELV. Prohibition substance and it's criteria value of RoHS2 / ELV are as follows. ・RoHS2 instruction 　…　Refer to following 1 to 10. ・ELV instruction 　…　Refer to following 1 to 4. No. 2018.10.24 Substances Threshold 1 Lead and its compounds 0.1% (1,000ppm) 2 Mercury and its compounds 0.1% (1,000ppm) 3 Cadmium and its compounds 0.01% (100ppm) 4 Hexavalent chromium compounds 0.1% (1,000ppm) 5 PBB : Polybrominated Biphenyls 0.1% (1,000ppm) 6 PBDE : Polybrominated Biphenyl Ethers 0.1% (1,000ppm) 7 DEHP : Bis (2-ethylhexyl) phthalate 0.1% (1,000ppm) 8 BBP : Butyl benzyl phthalate 0.1% (1,000ppm) 9 DBP : Dibutyl phthalate 0.1% (1,000ppm) 10 DIBP : Diisobutyl phthalate 0.1% (1,000ppm) Page : 19 Reliability Testing Result VFHD1104P-4BY2B-TR 1. Reliability Testing Result Test Item Reference Standard Test Condition Duration Failure Operating Life EIAJ ED-4701 /100(101) Ta=25℃ Maximum Rated Current 1,000h 0 / 20 High Temperature Operating Life EIAJ ED-4701 /100(101) 1,000h 0 / 20 Low Temperature Operating Life EIAJ ED-4701 /100(101) Ta=-40℃ Maximum Rated Current 1,000h 0 / 20 Wet High Temperature Operating Life EIAJ ED-4701 /100(102) Ta=60℃ Rh=90% Maximum Rated Current 1,000h 0 / 20 High Temperature Storage Life EIAJ ED-4701 /200(201) Ta = Tstg max. Maximum Storage Temperature 1,000h 0 / 20 Low Temperature Storage Life EIAJ ED-4701 /200(202) Ta = Tstg min. Minimum Storage Temperature 1,000h 0 / 20 Wet High Temperature Storage Life EIAJ ED-4701 /100(101) Ta=60℃ Rh=90% 1,000h 0 / 20 Thermal Shock EIAJ ED-4701 /100(105) Ta= Tstg max. ～ Tstg min. (15min of each) 1,000 cycles 0 / 20 Resistance to Reflow Soldering EIAJ ED-4701 /300(301) Moisture Soak ： 30℃ 70%　72h Preheating ： 150～180℃　120sec MAX. Soldering ： 260℃ 5sec 2 times 0 / 20 Electric Static Discharge(ESD) : HBM EIAJ ED-4701 /300(304) C=100pF R2=1.5KΩ ±2,000V once of each polarity 0 / 10 Electric Static Discharge(ESD) : MM EIAJ ED-4701 /300(304) C=200pF R2=0Ω±200V once of each polarity 0 / 10 Vibration, Variable Frequency EIAJ ED-4701 /400(403) 98.1m/s 2 (10G) 100～2,000Hz 20min sweep XYZ direction 2h of each direction 0 / 10 ※1 Ta=85℃ Maximum Rated Current ※1 Maximum Rated Current at Maximum Rated Operating Temperature 2. Failure Criteria Item Symbol Condition Failure Criteria Luminous Intensity Iv IF = 20mA Testing M in. Value ＜Standard M in. Value × 0.5 Forward Voltage VF IF = 20mA Testing M ax. Value≧ Standard M ax. Value × 1.2 Reverse Current IR VR = 5V Testing M ax. Value≧ Standard M ax. Value × 2.5 Cosmetic appearance - - Notable, discoloration, deformation and cracking 2013.6.28 Page : 20 VFHD1104P-4BY2B-TR Special Notice to Customers Using the Products and Technical Information Shown in This Data Sheet 1) The technical information shown in the data sheets are limited to the typical characteristics and circuit examples of the referenced products. It does not constitute the warranting of industrial property nor the granting of any license. 2) For the purpose of product improvement, the specifications, characteristics and technical data described in the data sheets are subject to change without prior notice. Therefore it is recommended that the most updated specifications be used in your design. 3) When using the products described in the data sheets, please adhere to the maximum ratings for operating voltage, heat dissipation characteristics, and other precautions for use. We are not responsible for any damage which may occur if these specifications are exceeded. 4) The products that have been described to this catalog are manufactured so that they will be used for the electrical instrument of the benchmark (OA equipment, telecommunications equipment, AV machine, home appliance and measuring instrument). The application of aircrafts, space borne application, transportation equipment, medical equipment and nuclear power control equipment, etc. needs a high reliability and safety, and the breakdown and the wrong operation might influence the life or the human body. Please consult us beforehand if you plan to use our product for the usages of aircrafts, space borne application, transportation equipment, medical equipment and nuclear power control equipment, etc. except OA equipment, telecommunications equipment, AV machine, home appliance and measuring instrument. 5) In order to export the products or technologies described in this data sheet which are under the “Foreign Exchange and Foreign Trade Control Law,” it is necessary to first obtain an export permit from the Japanese government. 6) No part of this data sheet may be reprinted or reproduced without prior written permission from Stanley Electric Co., Ltd. 7) The most updated edition of this data sheet can be obtained from the address below: http://www.stanley-components.com/en 2013.6.28 Page : 21