Standard Product Specifications
VFR1105W-6C9-TR
Features
Package
3216 size Dome Lens Type, Red color emitting LED
Product features
・Outer Dimension 3.2 x 1.6 x 1.85mm ( L x W x H )
・Lead–free soldering compatible
・RoHS compliant
Recommended Applications
Light source for switch of Automotive, Mobile equipment, Electric Household Appliances,
OA/FA, Other General Applications
2014.4.2
Page : 1
VFR1105W-6C9-TR
Outline Dimensions
UNIT
Weight
Tolerance
NO.
PART NAME
MATERIAL
QTY.
①
LED Die
AlGaInP
1
②
Plastic
Epoxy Resin
1
③
Substance
Glass Fabrics
1
:mm
:7.81mg
:±0.1
Recommended Pad
UNIT:mm
2014.4.2
Page : 2
VFR1105W-6C9-TR
Specifications
【 Product Overview 】
DIE MATERIAL
AlGaInP
EMITTING COLOR
Red
RESIN COLOR 【EMITTING AREA】
Water Clear
【 ABSOLUTE MAXIMUM RATINGS 】
(Ta=25℃)
ITEM
SYMBOL
MAXIMUM RATINGS
UNITS
Power Dissipation
Pd
78
mW
Continuous Forward Current
IF
30
mA
Repetitive Peak Forward Current
【1ms, 1/20duty】
IFRM
100
mA
IFDerate Linearly【 from Ta=75℃ 】
ΔIF
1.00
mA/℃
IFRMDerate Linearly【 from Ta=75℃ 】
ΔIFRM
3.33
mA/℃
Reverse Voltage
VR
5
V
Operating Temperature
Topr
-40 ~ +100
℃
Storage Temperature
Tstg
-40 ~ +120
℃
Electrostatic Discharge Threshold "HBM"
ESD
1,000
V
Note1
Soldering Temperature "Reflow Soldering"
Tsld
260
℃
Note2
Note1
ESD testing method : EIAJ4701/300(304) Human Body Model(HBM) 1.5kΩ, 100pF
Note2
Please refer to page 8, soldering conditions.
【 Thermal Characteristics 】
ITEM
Thermal resistance
【Junction-Ambient】
Thermal resistance
【Junction-Solder point】
Junction Temperature
Note3
(Ta=25℃)
SYMBOL
TYP.
MAX.
UNITS
Rth(j-a)
650
-
℃/W
Rth(j-s)
450
-
℃/W
Tj
-
120
℃/W
Note3
Rth(j-a) Measurement Condition
Substrate : FR4(t=1.6mm)
Pattern Size : 16m㎡
2014.4.2
Page : 3
VFR1105W-6C9-TR
Specifications
【 Electro and Optical Characteristics 】
(Ta=25℃)
ITEM
SYMBOL CONDITIONS
MIN.
TYP.
MAX.
UNITS
Forward Voltage
VF
IF = 20mA
-
1.9
2.4
V
Reverse Current
IR
VR = 5V
-
-
100
μA
Luminous Intensity
IV
IF = 20mA
470
-
1,500
mcd
Luminous Flux
φv
IF = 20mA
-
450
-
mlm
Peak Wavelength
λ p
IF = 20mA
-
635
-
nm
Dominant Wavelength
λd
IF = 20mA
620
-
638
nm
Spectral Line Half Width
Δλ
IF = 20mA
-
15
-
nm
Half Intensity Angle
2θ1/2
IF = 20mA
-
40
-
deg.
Note
Above the table of Luminous Intensity (IV) values and Dominant Wavelength (λ d) values are the
setup value of the selection machine.
【Tolerance : IV ±10%,λ d ±1nm】
【 Sorting For Luminous Intensity and Dominant Wavelength 】
LED's shall be sorted out into the following ranks of Luminous Intensity and Dominant Wavelength.
Luminous Intensity (Iv) Rank
Rank
IV (mcd)
MIN.
MAX.
C9
470
560
CX
560
680
CY
680
820
CZ
820
1,000
D1
1,000
1,200
D2
1,200
1,500
Dominant Wavelength (λ d) Rank
Conditions
IF =20mA
Ta=25℃
Rank
λ d (nm)
MIN.
MAX.
A
620
626
B
626
632
C
632
638
Conditions
IF =20mA
Ta=25℃
Notes Above the table of Luminous Intensity (IV) values and Dominant Wavelength (λd) values are the
setup value of the selection machine.
【Tolerance : IV…±10%, λd…±1nm】
2014.4.2
Page : 4
VFR1105W-6C9-TR
Technical Data
Wavelength vs. Relative Intensity
Conditions : Ta = 25℃, IF=20mA
1.2
1.1
1.0
Relative Intensity
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0.0
380
430
480
530
580
Wavelength : (nm)
630
680
730
780
Spatial Distribution
Conditions : Ta=25℃, IF=20mA
100
x
0
-30
y
30
x Direction
y Direction
-60
-90
0
100
2014.4.2
60
50
50
0
Relative Radiant Intensity : (%)
90
50
10 0
Page : 5
VFR1105W-6C9-TR
Technical Data
Forward Current vs. Relative Intensity
Forward Voltage vs. Forward Current
Condition : Ta=25℃
Condition : Ta=-20~85℃
1.5
100
85℃
-20℃
1.0
Relative Intensity
Forward Current : IF (mA)
60℃ 25℃ 0℃
10
CI
0.5
0.0
1
1.6
1.7
1.8
1.9
Forward Voltage : VF (V)
2.0
0
2.1
5
10
15
20
25
Ambient Temperature vs. Maximum Forward Current
Ambient Temperature vs. Relative Intensity
Repeatition Frequency : f≧50Hz, Pulse Width : tw≦1ms
Condition : IF=20mA
120
10.0
Duty=5%
100
Relative Intensity
Maximum Forward Current : IF MAX. (mA)
30
Forward Current : IF (mA)
Duty=10%
80
Duty=20%
60
1.0
Duty=50%
40
DC
20
0
0.1
-40
2014.4.2
-20
0
20
40
60
80
Ambient Temperature : Ta (℃)
100
120
-40
-20
0
20
40
60
80
Ambient temperature : Ta (℃)
100
120
Page : 6
VFR1105W-6C9-TR
Technical Data
Ambient Temperature vs. Forward Voltage
Forward Current vs. Dominant Wavelength
Condition : IF=2~30mA
Condition : Ta=25℃
630
Forward Voltage : VF (V)
2.0
1.9
IF=30mA
IF=20mA
1.8
IF=10mA
IF=5mA
1.7
Dominant Wavelength : λd (nm)
2.1
625
IF=2mA
1.6
-40
-20
0
20
40
60
80
Ambient Temperature : Ta (℃)
100
620
120
0
10
20
Forward Current : IF (mA)
30
Duty Cycle vs. Maximum Forward Current
Ambient Temperature vs. Dominant Wavelength
Condition : IF=20mA
100
Maximum Forward Current : IF MAX. (mA)
Dominant Wavelength : λd (nm)
630
625
620
-40
-20
0
20
40
60
Ambient Temperature : Ta (℃)
2014.4.2
80
100
10
1
1
10
Duty : (%)
100
Page : 7
Soldering conditions
VFR1105W-6C9-TR
1. Reflow Soldering
【Recommended Reflow Soldering Condition.】
Peak Temperature
(Soldering)
260℃ MAX.
+1.5~+5℃/s
-1.5~-5℃/s
230℃ MAX.
90~120sec MAX.
( Pre-heating)
150℃~180℃
40sec MAX.
1.
The above temp. profile shall be at the surface of LED resin.
2.
The number of reflow process shall be 2 time MAX. If second reflow process would be performed,
intervals between first and second process shall be as short as possible to prevent absorption of
moisture to resin of LED. Cooling process to normal temp. shall be required between first and second
reflow process.
3.
Temp. fluctuation to LED at pre-heat process shall be minimized.
2. Manual Soldering (Soldering iron)
Temperature of Iron Tip
350℃MAX.
Soldering Duration, Time
3sec.Max.,1 time
※ The number of manual soldering process shall be 1 time.
3. Other Caution
1.
As manual soldering, please heat the solder pad, should not contact a tip of iron to a product
(especially resin).
2.
Heat or UV(or both) curing resin shall used for preliminary fixing.
Curing condition temp. : 150 ℃ MAX. , time : 120s MAX.
3.
After soldering, any mechanical force or any excess vibration shall not be accepted to apply during
cooling process to normal temp.
4. Precaution for Mounting
1.
2014.4.2
This product is lens type. Nozzle should be used that a diameter of nozzle inside is Φ 1.7~Φ 1.8mm.
Page : 8
Handling Precaution
VFR1105W-6C9-TR
1. Cleaning
1.
Special care shall be taken when applying the chemicals listed below for cleaning because certain
chemicals may damage the surface of lens or care and cause discoloration.
Chemical
Adaptability
Ethyl Alcohol
○
Isopropyl Alcohol
○
Pure Water
○
Trichloroethylene
×
Chlorothene
×
Acetone
×
Thinner
×
※ Dipping time is 3minutes MAX. (In normal temp.)
※ It can be cleaned on the next page conditions, about pure water.
2.
Effect of ultrasonic cleaning on the LED resin body differs depending on such factors as the oscillator
output, size of P.C.B. and LED mounting method. So the use of ultrasonic cleaning is strongly
recommended after confirming that there is no problem.
3.
When using Freon equivalent solvent, discoloration on the LED surface may be caused by one of the
first confirming that there is no problem.
※ Freon substitute detergent
・Clean through 750H
・Pine alpha ST-100S
4.
2014.4.2
In the case of water-washing , ensure to use pure water (not city water) and , immediately after the
washing is over, apply forced drying to remove all the moisture from the LED.
Page : 9
Packaging Specifications
VFR1105W-6C9-TR
This product is baked (moisture removal) before packaging, and is shipped in moisture-proof packaging (as
shown below) to minimize moisture absorption during transportation and storage. However, with regard to
storing the products, Stanley recommends the use of dry-box under the following conditions is recommended.
Moisture-proof bag as the packaging is made of anti-static material but packaging box is not.
【Recommended Storage Condition / Products Warranty Period 】
Temperature
+5~30℃
Humidity
Under 70%
In the case of the package unopened , 6 months under 【 Recommended Storage Condition 】.
Please avoid rapid transition from low temp. condition to high temp. condition
and storage in corroding and dusty environment.
【Time elapsed after Package Opening】
The package should not be opened until immediately prior to its use, and please keep the time frame
between package opening and soldering which is 【maximum 72h】.
If the device needs to be soldered twice, both soldering operations must be completed within the 168h.
If any components should remain unused, please reseal the package and store them under the conditions
described in the 【 Recommended Storage Condition 】 above.
This product must be required to perform baking process (moisture removal)
for at 23( MIN.).∼72h (MAX.) , at 60 +/- 5 degrees Celsius if following conditions apply.
1. In the case of silica gel (blue) which indicates the moisture level within the package, changes or loses its
blue color.
2. In the case of time passes for 72h after the package is opened once.
Baking process should be performed after LED having been taken out of the package.
Baking may be performed in the tape-reel form , however if it is performed with the reel stacked over one
another, it may cause deformation of the reels and taping materials and later obstruct mounting. Please
handle only once it has returned to room temperature. Provided that, baking process shall be 2 times MAX.
2014.4.2
Page : 10
Packaging Specifications
VFR1105W-6C9-TR
【Moisture-proof Packaging Specification】
Fastener for re-storage
after opening bag.
Customer's opening position.
A
Product Label
Heat Sealing position (after product being put in)
Desiccant with indicator for
moisture level is enclosed.
1
SYM.
PART NAME
MATELRIAL
REMARKS
①
Moisture-proof bag
with Aluminum layer
PET+Al+PE
with ESD
protection
Flow chart:Package
Opening
to Mounting
【Flow Chart-package
Opening
to Mounting】
Stored under recommended condition
Moisture-proof package first time opening
Allowable leaving time exceeded (*)
Yes
No
Discoloration of silica gel
Yes
No
Baking LED under recommended condition
Product Mounting
Allowable leaving time means the
maximum allowable leaving time after
opening package, which depends on
each LED type.
The allowable leaving time should be
calculated form the first opening of
package to the time when soldering
process is finished.
When judging if the allowable leaving
time has exceeded or not, please subtract
the soldering time. The allowable leaving
time after reopening should be calculated
form the first opening of package, or from
the time when baking process is finished.
Unused-product remained
Yes
Return to moisture-proof package and seal
No
Finished
Reopen the moisture-proof package
2014.4.2
Page : 11
Packaging Specifications
VFR1105W-6C9-TR
【 Packing box 】
(RoHS・ELV Compliant)
Box TYPE
Outline dimension
L × W × H (mm)
Capacity of the box
Type A
280 × 265 × 45 (mm)
3 reel
Type B
310 × 235 × 265 (mm)
15 reel
Type C
440 × 310 × 265 (mm)
30 reel
The above measure is all the reference value.
The box is selected out of the above table, by the shipping quantity.
B
Type A
Material / box : Cardoard C5BF
2014.4.2
Type B,C
Material / box : Cardoard K5AF
Partition : Cardoard K5BF
Page : 12
Packaging Specifications
VFR1105W-6C9-TR
【 Label Specification】
( acc.to ; JIS-X0503(Code-39)
A
Product label
A. Parts number (Indicated the whole parts number)
B. Bar-code for parts number
C. Parts code (In-house identification code for each parts number)
D. Packed parts quantity (Indicated Parts Qty in the packing)
E. Bar-Code for packed parts quantity
F. Lot number & Rank (indicated the following 16 digits)
G. Bar-Code for Lot number & Rank
B
Opto device label
A. Custmer Name
B. Parts Type
C. Parts Code
D. Parts Number
E. Packed Parts Quantity
F. Carton Number
G. Shipping Date
H. Bar-Code for In-house identification Number
Bar-code font : acc.to Code-39(JIX0503)
2014.4.2
Page : 13
Lot Number Notational System
①
②
③
④
⑤
VFR1105W-6C9-TR
⑥
⑦
⑧
⑨
① - 1digit : Production Location (Mark identify alphabet)
② - 1digit : Production Year (Last Digit of Production Year 2009→9,2010→0,2011→1,・・・)
③ - 2digit : Production Month (Jan. to Sep. ,Should be 01,02,03,・・・・・)
④ - 2digit : Production Date
⑤ - 3digit : Serial Number
⑥ - 2digit : Tape and Reel following Number
⑦ - 2digit : Luminous Intensity Rank. (If only 1 digit, second digit
must be dash "-"and if not identified rank, its"- -")
⑧ - 2digit : Chromaticity Rank (If only 1 digit, second digit
must be dash “-”and if not identified rank, its"- -")
⑨ - 1digit : Option Rank (Normally its"-")
2014.4.2
Page : 14
Taping and Reel Specifications
VFR1105W-6C9-TR
(acc.to ; JIS-C0806)
1. Appearance
Direction to take
out
Note
"-TR" means Cathode Side of LEDs should be placed on the sprocket-hole side.
Items
Leader area
Cover-tape
Carrier-tape
Trailer area
2014.4.2
Specifications
Remarks
Cover-tape shall be longer
than 200mm without carrier-tape
The end of cover-tape shall be
held with adhesive tape.
Empty pocket shall be more than
10 pieces.
Taping & reel orientation is ;
please refer to the above figure.
Empty pocket shall be more than
15 pieces.
The end of taping shall be
inserted into a slit of the hub.
Page : 15
Taping and Reel Specifications
VFR1105W-6C9-TR
2. Qty. per Reel
2,000parts/reel
Minimum Qty. per reel might be 500 parts when getting less than 3,000 parts.
In such case, parts of 500-unit-qty. shall be packed in a reel and the qty. shall be identified on the label.
3. Mechanical strength
Cover-tape adhesive strength shall be 0.1~1.0N ( An angle between carrier-tape and cover-tape shall
be170 deg. ) Both tapes shall be so sealed that the contained parts will not come out from the tape
when it is bent at a radius of 15mm.
4. Others
Reversed-orientation, Up-side down placing, side placing and out of spec. parts mix shall not be held.
No more than 1 connecting empty pockets of taping.
Max qty. of empty pocket per reel shall be defined as follows.
2014.4.2
Qty./reel
Max. qty. of empty pocket
Remark
500
1
-
1,000
1
-
1,500
1
-
2,000
2
No continuance
Page : 16
Taping and Reel Specifications
VFR1105W-6C9-TR
(acc.to ; JIS-C0806)
5. Taping Dimensions
6. Reel Dimensions
③
2014.4.2
NO.
PART NAME
REMARKS
1
Carrier-tape
Without ESD protection
2
Cover-tape
With ESD protection
3
Carrier-real
With ESD protection
Page : 17
Correspondence to RoHS・ELV instruction
VFR1105W-6C9-TR
This product is in compliance with RoHS・ELV.
Prohibition substance and it's criteria value of RoHS・ELV are as follows.
・RoHS instruction …… Refer to following (1)~(6).
・ELV instruction ………. Refer to following (1)~(4).
2014.4.2
Substance Group Name
Criteria Value
(1)
Lead and its compounds
1,000ppm Max
(2)
Cadmium and its compounds
100ppm Max
(3)
Mercury and its compounds
1,000ppm Max
(4)
Hexavalent chromium
1,000ppm Max
(5)
PBB
1,000ppm Max
(6)
PBDE
1,000ppm Max
Page : 18
VFR1105W-6C9-TR
Reliability Testing Result
Reference
Standard
EIAJ ED-4701
Operating Life
/100(101)
EIAJ ED-4701
High Temperature Operating Life
/100(101)
EIAJ ED-4701
Low Temperature Operating Life
/100(101)
EIAJ ED-4701
Wet High Temperature Operating Life
/100(102)
EIAJ ED-4701
High Temperature Storage Life
/200(201)
EIAJ ED-4701
Low Temperature Storage Life
/200(202)
EIAJ ED-4701
Wet High Ttemperature storage Life
/100(101)
EIAJ ED-4701
Thermal Shock
/100(105)
EIAJ ED-4701
Thermal Shock Operating
/100(105)
EIAJ ED-4701
Cycled Temperature Humidity Life
/200(203)
Test Item
Resistance to Reflow Soldring
※2
Electric Static Discharge(ESD)
Vibration, Variable Frequency
EIAJ ED-4701
/300(301)
EIAJ ED-4701
/300(304)
EIAJ ED-4701
/400(403)
Test Condition
Duration
Failure
Ta=25℃ Maximum Rated Current
1,000h
0 / 20
Ta=85℃ Maximum Rated Current ※1
1,000h
0 / 20
Ta=-40℃ Maximum Rated Current
1,000h
0 / 20
Ta=60℃ Rh=90% Maximum Rated Current
1,000h
0 / 20
Ta=Tstg max. Maximum Storage Temperature
1,000h
0 / 20
Ta=Tstg min. Minimum Storage Temperature
1,000h
0 / 20
Ta=60℃ Rh=90%
1,000h
0 / 20
Ta=Tstg max. ~ Tstg min.
(each 15min)
1000
cycles
1000
cycles
30
cycles
Ta=-40℃(OFF) ~85℃(ON /Maximum Rated Current ※1)
(each 15min)
Ta=-30℃ ~ 80℃ 95% 8h/cycles
5min on-off (Maximum Rated Current ※1)
Moisture Soak : 30℃ 70% 72h
Preheating : 150~180℃ 120sec MAX.
Soldering : 260℃ 5sec
0 / 20
0 / 20
0 / 20
2times
0 / 20
C=100pF R2=1.5KΩ ±2000V
once of
each polarity
0 / 10
98.1m/s2 (10G) 100~2000Hz 20min sweep XYZ direction
2h of each
direction
0 / 10
※1 Maximum rated current at maximum rated operating temperature.
※2 Reference test
Failure Criteria
Item
Symbol
Condition
Criteria
Luminous Intensity
IV
IF Value of each product
Luminous Intensity
Testing Min. Value < Standard Min. Value × 0.5
Forward Voltage
VF
IF Value of each product
Forward Voltage
Testing Max. Value ≧ Standard Max. Value × 1.2
Reverse Current
IR
VR=5V
Testing Max. Value ≧ Standard Max. Value × 2.5
Cosmetic appearance
-
-
No notable, decolation, deformation and cracking
2014.4.2
Page : 19
VFR1105W-6C9-TR
Special Notice to Customers Using the Products and
Technical Information Shown in This Data Sheet
1) The technical information shown in the data sheets are limited to the typical characteristics and circuit
examples of the referenced products. It does not constitute the warranting of industrial property nor the
granting of any license.
2) For the purpose of product improvement, the specifications, characteristics and technical data described in
the data sheets are subject to change without prior notice. Therefore it is recommended that the most
updated specifications be used in your design.
3) When using the products described in the data sheets, please adhere to the maximum ratings for operating
voltage, heat dissipation characteristics, and other precautions for use. We are not responsible for any
damage which may occur if these specifications are exceeded.
4) The products that have been described to this catalog are manufactured so that they will be used for the
electrical instrument of the benchmark (OA equipment, telecommunications equipment, AV machine, home
appliance and measuring instrument).
The application of aircrafts, space borne application, transportation equipment, medical equipment and
nuclear power control equipment, etc. needs a high reliability and safety, and the breakdown and the wrong
operation might influence the life or the human body. Please consult us beforehand if you plan to use our
product for the usages of aircrafts, space borne application, transportation equipment, medical equipment
and nuclear power control equipment, etc. except OA equipment, telecommunications equipment, AV
machine, home appliance and measuring instrument.
5) In order to export the products or technologies described in this data sheet which are under the
“Foreign Exchange and Foreign Trade Control Law,” it is necessary to first obtain an export permit from the
Japanese government.
6) No part of this data sheet may be reprinted or reproduced without prior written permission from Stanley
Electric Co., Ltd.
7) The most updated edition of this data sheet can be obtained from the address below:
http://www.stanley-components.com/en
2014.4.2
Page : 20