VFR1105W-6C9

Standard Product Specifications VFR1105W-6C9-TR Features Package 3216 size Dome Lens Type, Red color emitting LED Product features ・Outer Dimension 3.2 x 1.6 x 1.85mm ( L x W x H ) ・Lead–free soldering compatible ・RoHS compliant Recommended Applications Light source for switch of Automotive, Mobile equipment, Electric Household Appliances, OA/FA, Other General Applications 2014.4.2 Page : 1 VFR1105W-6C9-TR Outline Dimensions UNIT Weight Tolerance NO. PART NAME MATERIAL QTY. ① LED Die AlGaInP 1 ② Plastic Epoxy Resin 1 ③ Substance Glass Fabrics 1 ：mm ：7.81mg ：±0.1 Recommended Pad UNIT：mm 2014.4.2 Page : 2 VFR1105W-6C9-TR Specifications 【 Product Overview 】 DIE MATERIAL AlGaInP EMITTING COLOR Red RESIN COLOR 【EMITTING AREA】 Water Clear 【 ABSOLUTE MAXIMUM RATINGS 】 (Ta=25℃) ITEM SYMBOL MAXIMUM RATINGS UNITS Power Dissipation Pd 78 mW Continuous Forward Current IF 30 mA Repetitive Peak Forward Current 【1ms, 1/20duty】 IFRM 100 mA IFDerate Linearly【 from Ta=75℃ 】 ΔIF 1.00 mA/℃ IFRMDerate Linearly【 from Ta=75℃ 】 ΔIFRM 3.33 mA/℃ Reverse Voltage VR 5 V Operating Temperature Topr -40 ～ +100 ℃ Storage Temperature Tstg -40 ～ +120 ℃ Electrostatic Discharge Threshold "HBM" ESD 1,000 V Note1 Soldering Temperature "Reflow Soldering" Tsld 260 ℃ Note2 Note1 ESD testing method : EIAJ4701/300(304) Human Body Model(HBM) 1.5kΩ, 100pF Note2 Please refer to page 8, soldering conditions. 【 Thermal Characteristics 】 ITEM Thermal resistance 【Junction-Ambient】 Thermal resistance 【Junction-Solder point】 Junction Temperature Note3 (Ta=25℃) SYMBOL TYP. MAX. UNITS Rth(j-a) 650 - ℃/W Rth(j-s) 450 - ℃/W Tj - 120 ℃/W Note3 Rth(j-a) Measurement Condition Substrate : FR4(t=1.6mm) Pattern Size : 16m㎡ 2014.4.2 Page : 3 VFR1105W-6C9-TR Specifications 【 Electro and Optical Characteristics 】 (Ta=25℃) ITEM SYMBOL CONDITIONS MIN. TYP. MAX. UNITS Forward Voltage VF IF = 20mA - 1.9 2.4 V Reverse Current IR VR = 5V - - 100 μA Luminous Intensity IV IF = 20mA 470 - 1,500 mcd Luminous Flux φv IF = 20mA - 450 - mlm Peak Wavelength λ p IF = 20mA - 635 - nm Dominant Wavelength λd IF = 20mA 620 - 638 nm Spectral Line Half Width Δλ IF = 20mA - 15 - nm Half Intensity Angle 2θ1/2 IF = 20mA - 40 - deg. Note Above the table of Luminous Intensity (IV) values and Dominant Wavelength (λ d) values are the setup value of the selection machine． 【Tolerance ： IV ±10%,λ d ±1nm】 【 Sorting For Luminous Intensity and Dominant Wavelength 】 LED's shall be sorted out into the following ranks of Luminous Intensity and Dominant Wavelength. Luminous Intensity (Iv) Rank Rank IV (mcd) MIN. MAX. C9 470 560 CX 560 680 CY 680 820 CZ 820 1,000 D1 1,000 1,200 D2 1,200 1,500 Dominant Wavelength (λ d) Rank Conditions IF =20mA Ta=25℃ Rank λ d (nm) MIN. MAX. A 620 626 B 626 632 C 632 638 Conditions IF =20mA Ta=25℃ Notes Above the table of Luminous Intensity (IV) values and Dominant Wavelength (λd) values are the setup value of the selection machine. 【Tolerance : IV…±10%, λd…±1nm】 2014.4.2 Page : 4 VFR1105W-6C9-TR Technical Data Wavelength vs. Relative Intensity Conditions : Ta = 25℃, IF=20mA 1.2 1.1 1.0 Relative Intensity 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0.0 380 430 480 530 580 Wavelength : (nm) 630 680 730 780 Spatial Distribution Conditions : Ta=25℃, IF=20mA 100 x 0 -30 y 30 x Direction ｙ Direction -60 -90 0 100 2014.4.2 60 50 50 0 Relative Radiant Intensity : (%) 90 50 10 0 Page : 5 VFR1105W-6C9-TR Technical Data Forward Current vs. Relative Intensity Forward Voltage vs. Forward Current Condition : Ta=25℃ Condition : Ta=-20～85℃ 1.5 100 85℃ -20℃ 1.0 Relative Intensity Forward Current : IF (mA) 60℃ 25℃ 0℃ 10 CI 0.5 0.0 1 1.6 1.7 1.8 1.9 Forward Voltage : VF (V) 2.0 0 2.1 5 10 15 20 25 Ambient Temperature vs. Maximum Forward Current Ambient Temperature vs. Relative Intensity Repeatition Frequency : f≧50Hz, Pulse Width : tw≦1ms Condition : IF=20mA 120 10.0 Duty=5% 100 Relative Intensity Maximum Forward Current : IF MAX. (mA) 30 Forward Current : IF (mA) Duty=10% 80 Duty=20% 60 1.0 Duty=50% 40 DC 20 0 0.1 -40 2014.4.2 -20 0 20 40 60 80 Ambient Temperature : Ta (℃) 100 120 -40 -20 0 20 40 60 80 Ambient temperature : Ta (℃) 100 120 Page : 6 VFR1105W-6C9-TR Technical Data Ambient Temperature vs. Forward Voltage Forward Current vs. Dominant Wavelength Condition : IF=2～30mA Condition : Ta=25℃ 630 Forward Voltage : VF (V) 2.0 1.9 IF=30mA IF=20mA 1.8 IF=10mA IF=5mA 1.7 Dominant Wavelength : λd (nm) 2.1 625 IF=2mA 1.6 -40 -20 0 20 40 60 80 Ambient Temperature : Ta (℃) 100 620 120 0 10 20 Forward Current : IF (mA) 30 Duty Cycle vs. Maximum Forward Current Ambient Temperature vs. Dominant Wavelength Condition : IF=20mA 100 Maximum Forward Current : IF MAX. (mA) Dominant Wavelength : λd (nm) 630 625 620 -40 -20 0 20 40 60 Ambient Temperature : Ta (℃) 2014.4.2 80 100 10 1 1 10 Duty : (％) 100 Page : 7 Soldering conditions VFR1105W-6C9-TR 1. Reflow Soldering 【Recommended Reflow Soldering Condition.】 Peak Temperature (Soldering） 260℃ MAX. +1.5～+5℃/s -1.5～-5℃/s 230℃ MAX. 90~120sec MAX. （ Pre-heating） 150℃～180℃ 40sec MAX. 1. The above temp. profile shall be at the surface of LED resin. 2. The number of reflow process shall be 2 time MAX. If second reflow process would be performed, intervals between first and second process shall be as short as possible to prevent absorption of moisture to resin of LED. Cooling process to normal temp. shall be required between first and second reflow process. 3. Temp. fluctuation to LED at pre-heat process shall be minimized. 2. Manual Soldering (Soldering iron) Temperature of Iron Tip 350℃MAX. Soldering Duration, Time 3sec.Max.,1 time ※ The number of manual soldering process shall be 1 time. 3. Other Caution 1. As manual soldering, please heat the solder pad, should not contact a tip of iron to a product (especially resin). 2. Heat or UV(or both) curing resin shall used for preliminary fixing. Curing condition temp. : 150 ℃ MAX. , time : 120s MAX. 3. After soldering, any mechanical force or any excess vibration shall not be accepted to apply during cooling process to normal temp. 4. Precaution for Mounting 1. 2014.4.2 This product is lens type. Nozzle should be used that a diameter of nozzle inside is Φ 1.7～Φ 1.8mm. Page : 8 Handling Precaution VFR1105W-6C9-TR 1. Cleaning 1. Special care shall be taken when applying the chemicals listed below for cleaning because certain chemicals may damage the surface of lens or care and cause discoloration. Chemical Adaptability Ethyl Alcohol ○ Isopropyl Alcohol ○ Pure Water ○ Trichloroethylene × Chlorothene × Acetone × Thinner × ※ Dipping time is 3minutes MAX. (In normal temp.) ※ It can be cleaned on the next page conditions, about pure water. 2. Effect of ultrasonic cleaning on the LED resin body differs depending on such factors as the oscillator output, size of P.C.B. and LED mounting method. So the use of ultrasonic cleaning is strongly recommended after confirming that there is no problem. 3. When using Freon equivalent solvent, discoloration on the LED surface may be caused by one of the first confirming that there is no problem. ※ Freon substitute detergent ・Clean through 750H ・Pine alpha ST-100S 4. 2014.4.2 In the case of water-washing , ensure to use pure water (not city water) and , immediately after the washing is over, apply forced drying to remove all the moisture from the LED. Page : 9 Packaging Specifications VFR1105W-6C9-TR This product is baked (moisture removal) before packaging, and is shipped in moisture-proof packaging (as shown below) to minimize moisture absorption during transportation and storage. However, with regard to storing the products, Stanley recommends the use of dry-box under the following conditions is recommended. Moisture-proof bag as the packaging is made of anti-static material but packaging box is not. 【Recommended Storage Condition / Products Warranty Period 】 Temperature +5～30℃ Humidity Under 70% In the case of the package unopened , 6 months under 【 Recommended Storage Condition 】. Please avoid rapid transition from low temp. condition to high temp. condition and storage in corroding and dusty environment. 【Time elapsed after Package Opening】 The package should not be opened until immediately prior to its use, and please keep the time frame between package opening and soldering which is 【maximum 72h】. If the device needs to be soldered twice, both soldering operations must be completed within the 168h. If any components should remain unused, please reseal the package and store them under the conditions described in the 【 Recommended Storage Condition 】 above. This product must be required to perform baking process (moisture removal) for at 23( MIN.).∼72h (MAX.) , at 60 +/- 5 degrees Celsius if following conditions apply. 1. In the case of silica gel (blue) which indicates the moisture level within the package, changes or loses its blue color. 2. In the case of time passes for 72h after the package is opened once. Baking process should be performed after LED having been taken out of the package. Baking may be performed in the tape-reel form , however if it is performed with the reel stacked over one another, it may cause deformation of the reels and taping materials and later obstruct mounting. Please handle only once it has returned to room temperature. Provided that, baking process shall be 2 times MAX. 2014.4.2 Page : 10 Packaging Specifications VFR1105W-6C9-TR 【Moisture-proof Packaging Specification】 Fastener for re-storage after opening bag. Customer's opening position. A Product Label Heat Sealing position (after product being put in) Desiccant with indicator for moisture level is enclosed. 1 SYM. PART NAME MATELRIAL REMARKS ① Moisture-proof bag with Aluminum layer PET+Al+PE with ESD protection Flow chart：Package Opening to Mounting 【Flow Chart-package Opening to Mounting】 Stored under recommended condition Moisture-proof package first time opening Allowable leaving time exceeded (*) Yes No Discoloration of silica gel Yes No Baking LED under recommended condition Product Mounting Allowable leaving time means the maximum allowable leaving time after opening package, which depends on each LED type. The allowable leaving time should be calculated form the first opening of package to the time when soldering process is finished. When judging if the allowable leaving time has exceeded or not, please subtract the soldering time. The allowable leaving time after reopening should be calculated form the first opening of package, or from the time when baking process is finished. Unused-product remained Yes Return to moisture-proof package and seal No Finished Reopen the moisture-proof package 2014.4.2 Page : 11 Packaging Specifications VFR1105W-6C9-TR 【 Packing box 】 (RoHS・ELV Compliant) Box TYPE Outline dimension L × W × H (mm) Capacity of the box Type A 280 × 265 × 45 (mm) 3 reel Type B 310 × 235 × 265 (mm) 15 reel Type C 440 × 310 × 265 (mm) 30 reel The above measure is all the reference value. The box is selected out of the above table, by the shipping quantity. B Type A Material / box ： Cardoard C5BF 2014.4.2 Type B,C Material / box ： Cardoard K5AF Partition ： Cardoard K5BF Page : 12 Packaging Specifications VFR1105W-6C9-TR 【 Label Specification】 ( acc.to ; JIS-X0503(Code-39) A Product label A. Parts number (Indicated the whole parts number) B. Bar-code for parts number C. Parts code (In-house identification code for each parts number) D. Packed parts quantity (Indicated Parts Qty in the packing) E. Bar-Code for packed parts quantity F. Lot number & Rank (indicated the following 16 digits) G. Bar-Code for Lot number & Rank B Opto device label A. Custmer Name B. Parts Type C. Parts Code D. Parts Number E. Packed Parts Quantity F. Carton Number G. Shipping Date H. Bar-Code for In-house identification Number Bar-code font : acc.to Code-39(JIX0503) 2014.4.2 Page : 13 Lot Number Notational System ① ② ③ ④ ⑤ VFR1105W-6C9-TR ⑥ ⑦ ⑧ ⑨ ① - 1digit ： Production Location (Mark identify alphabet) ② - 1digit ： Production Year (Last Digit of Production Year 2009→9,2010→0,2011→1,･･･) ③ - 2digit ： Production Month (Jan. to Sep. ,Should be 01,02,03,･････) ④ - 2digit ： Production Date ⑤ - 3digit ： Serial Number ⑥ - 2digit ： Tape and Reel following Number ⑦ - 2digit ： Luminous Intensity Rank. (If only 1 digit, second digit must be dash "-"and if not identified rank, its"- -") ⑧ - 2digit ： Chromaticity Rank (If only 1 digit, second digit must be dash “-”and if not identified rank, its"- -") ⑨ - 1digit ： Option Rank (Normally its"-") 2014.4.2 Page : 14 Taping and Reel Specifications VFR1105W-6C9-TR (acc.to ; JIS-C0806) 1. Appearance Direction to take out Note "-TR" means Cathode Side of LEDs should be placed on the sprocket-hole side. Items Leader area Cover-tape Carrier-tape Trailer area 2014.4.2 Specifications Remarks Cover-tape shall be longer than 200mm without carrier-tape The end of cover-tape shall be held with adhesive tape. Empty pocket shall be more than 10 pieces. Taping & reel orientation is ; please refer to the above figure. Empty pocket shall be more than 15 pieces. The end of taping shall be inserted into a slit of the hub. Page : 15 Taping and Reel Specifications VFR1105W-6C9-TR 2. Qty. per Reel 2,000parts/reel Minimum Qty. per reel might be 500 parts when getting less than 3,000 parts. In such case, parts of 500-unit-qty. shall be packed in a reel and the qty. shall be identified on the label. 3. Mechanical strength Cover-tape adhesive strength shall be 0.1～1.0N ( An angle between carrier-tape and cover-tape shall be170 deg. ) Both tapes shall be so sealed that the contained parts will not come out from the tape when it is bent at a radius of 15mm. 4. Others Reversed-orientation, Up-side down placing, side placing and out of spec. parts mix shall not be held. No more than 1 connecting empty pockets of taping. Max qty. of empty pocket per reel shall be defined as follows. 2014.4.2 Qty./reel Max. qty. of empty pocket Remark 500 1 - 1,000 1 - 1,500 1 - 2,000 2 No continuance Page : 16 Taping and Reel Specifications VFR1105W-6C9-TR (acc.to ; JIS-C0806） 5. Taping Dimensions 6. Reel Dimensions ③ 2014.4.2 NO. PART NAME REMARKS 1 Carrier-tape Without ESD protection 2 Cover-tape With ESD protection 3 Carrier-real With ESD protection Page : 17 Correspondence to RoHS・ELV instruction VFR1105W-6C9-TR This product is in compliance with RoHS・ELV. Prohibition substance and it's criteria value of RoHS・ELV are as follows. ・RoHS instruction …… Refer to following (1)～(6). ・ELV instruction ………. Refer to following (1)～(4). 2014.4.2 Substance Group Name Criteria Value (1) Lead and its compounds 1,000ppm Max (2) Cadmium and its compounds 100ppm Max (3) Mercury and its compounds 1,000ppm Max (4) Hexavalent chromium 1,000ppm Max (5) PBB 1,000ppm Max (6) PBDE 1,000ppm Max Page : 18 VFR1105W-6C9-TR Reliability Testing Result Reference Standard EIAJ ED-4701 Operating Life /100(101) EIAJ ED-4701 High Temperature Operating Life /100(101) EIAJ ED-4701 Low Temperature Operating Life /100(101) EIAJ ED-4701 Wet High Temperature Operating Life /100(102) EIAJ ED-4701 High Temperature Storage Life /200(201) EIAJ ED-4701 Low Temperature Storage Life /200(202) EIAJ ED-4701 Wet High Ttemperature storage Life /100(101) EIAJ ED-4701 Thermal Shock /100(105) EIAJ ED-4701 Thermal Shock Operating /100(105) EIAJ ED-4701 Cycled Temperature Humidity Life /200(203) Test Item Resistance to Reflow Soldring ※2 Electric Static Discharge(ESD) Vibration, Variable Frequency EIAJ ED-4701 /300(301) EIAJ ED-4701 /300(304) EIAJ ED-4701 /400(403) Test Condition Duration Failure Ta=25℃ Maximum Rated Current 1,000h 0 / 20 Ta=85℃ Maximum Rated Current ※1 1,000h 0 / 20 Ta=-40℃ Maximum Rated Current 1,000h 0 / 20 Ta=60℃ Rh=90% Maximum Rated Current 1,000h 0 / 20 Ta=Tstg max. Maximum Storage Temperature 1,000h 0 / 20 Ta=Tstg min. Minimum Storage Temperature 1,000h 0 / 20 Ta=60℃ Rh=90% 1,000h 0 / 20 Ta=Tstg max. ～ Tstg min. (each 15min) 1000 cycles 1000 cycles 30 cycles Ta=-40℃(OFF) ～85℃(ON /Maximum Rated Current ※1) (each 15min) Ta=-30℃ ～ 80℃ 95% 8h/cycles 5min on-off (Maximum Rated Current ※1) Moisture Soak ： 30℃ 70%　72h Preheating ： 150～180℃　120sec MAX. Soldering ： 260℃ 5sec 0 / 20 0 / 20 0 / 20 2times 0 / 20 C=100pF R2=1.5KΩ ±2000V once of each polarity 0 / 10 98.1m/s2 (10G) 100～2000Hz 20min sweep XYZ direction 2h of each direction 0 / 10 ※1 Maximum rated current at maximum rated operating temperature. ※2 Reference test Failure Criteria Item Symbol Condition Criteria Luminous Intensity IV IF Value of each product Luminous Intensity Testing Min. Value ＜ Standard Min. Value × 0.5 Forward Voltage VF IF Value of each product Forward Voltage Testing Max. Value ≧ Standard Max. Value × 1.2 Reverse Current IR VR=5V Testing Max. Value ≧ Standard Max. Value × 2.5 Cosmetic appearance - - No notable, decolation, deformation and cracking 2014.4.2 Page : 19 VFR1105W-6C9-TR Special Notice to Customers Using the Products and Technical Information Shown in This Data Sheet 1) The technical information shown in the data sheets are limited to the typical characteristics and circuit examples of the referenced products. It does not constitute the warranting of industrial property nor the granting of any license. 2) For the purpose of product improvement, the specifications, characteristics and technical data described in the data sheets are subject to change without prior notice. Therefore it is recommended that the most updated specifications be used in your design. 3) When using the products described in the data sheets, please adhere to the maximum ratings for operating voltage, heat dissipation characteristics, and other precautions for use. We are not responsible for any damage which may occur if these specifications are exceeded. 4) The products that have been described to this catalog are manufactured so that they will be used for the electrical instrument of the benchmark (OA equipment, telecommunications equipment, AV machine, home appliance and measuring instrument). The application of aircrafts, space borne application, transportation equipment, medical equipment and nuclear power control equipment, etc. needs a high reliability and safety, and the breakdown and the wrong operation might influence the life or the human body. Please consult us beforehand if you plan to use our product for the usages of aircrafts, space borne application, transportation equipment, medical equipment and nuclear power control equipment, etc. except OA equipment, telecommunications equipment, AV machine, home appliance and measuring instrument. 5) In order to export the products or technologies described in this data sheet which are under the “Foreign Exchange and Foreign Trade Control Law,” it is necessary to first obtain an export permit from the Japanese government. 6) No part of this data sheet may be reprinted or reproduced without prior written permission from Stanley Electric Co., Ltd. 7) The most updated edition of this data sheet can be obtained from the address below: http://www.stanley-components.com/en 2014.4.2 Page : 20