VLW1148LS

VLW1148LS PLCC-2 Type White LED (High Reliability type, White V-Series) Features Package Product features PLCC-2 Type, Diffused pale yellow resin ・Outer Dimension 2.17 x 1.4 x 1.3mm( L x W x H ) ・Wide operation temperature range. Storage Temperature : -40℃～110℃ Operating Temperature : -40℃～100℃ Operation Guarantee ・Spatial distribution characteristics. (2θ1/2 : 120deg) ・Corresponding to a use requiring high reliability in cars etc... ・Lead–free soldering compatible ・RoHS compliant Chromaticity coordinates x = 0.31TYP., y = 0.32TYP. (Condition : IF=10mA) Spatial distribution Die materials Optical efficiency 120 deg. InGaN 10.0lm/W Rank grouping parameter Assembly method Soldering methods Taping and reel ESD Sorted by luminous intensity and chromaticity per rank taping Auto pick & place machine (Auto Mounter) Reflow soldering and manual soldering 3,000pcs per reel in a 8mm width tape. (Standard) Reel diameter : φ180mm 1kV (HBM) Recommended Applications SW lighting for car indicators, meter panel, car audio and heater control, etc… 2006.10.30 Page 1 VLW1148LS PLCC-2 Type White LED (High Reliability type, White V-Series) Color and Luminous Intensity (Ta=25℃) Part No. Material Emitted Color Lens Color Luminous Intensity Iv (mcd) Luminous Flux φ v (lm) MIN. VLW1148LS InGaN White Pale Yellow 47 TYP. 100 IF 10 TYP. 0.31 IF 10 ※Note : The above luminous intensity(Iv) is the setup values of the sorting machine. (Tolerance : IV…±10%) 2006.10.30 Page 2 VLW1148LS PLCC-2 Type White LED (High Reliability type, White V-Series) Absolute Maximum Ratings Item Power Dissipation Forward Current Pulse Forward Current ※ 1 Derating (Ta=60℃ or higher) Reverse Voltage Operating Temperature Storage Temperature Symbol Pd IF IFRM ⊿ IF ⊿ IFRM VR T opr Tstg Unit mW mA mA mA/℃ mA/℃ V ℃ ℃ (Ta=25℃) Absolute Maximum Ratings 78 20 100 0.40 2 5 -40～ +100 -40～ +110 ※1 IFRM Measurement condition : Pulse Width≦1ms, Duty≦1/10 Thermal Characteristics Item Junction Temperature (MAX.) Thermal Resistance (TYP.) (Junction/ ambient) Symbol Ratings Unit Tj 110 ℃ R(th j-a) 350 ℃ /Ｗ Thermal Resistance (TYP.) (Junction/ Solder Point) R(th j-s) 200 ℃ /Ｗ ※Rth(j-a) Measurement Condition / Substrate: FR4(t=1.6mm) Pattern Size: 16mm2. 2006.10.30 Page 3 VLW1148LS PLCC-2 Type White LED (High Reliability type, White V-Series) Electro-Optical Characteristics (Ta=25℃) Item Condition IF=10mA Symbol Characteristics TYP. 3.1 Unit Forward Voltage VF MAX. 3.7 10 120 0.31 0.32 V Reverse Current Half Intensity Angle Chromaticity Coordinates VR =5V IF=10mA IR 2θ 1/2 x MAX. TYP. TYP. TYP. μA deg. - IF=10mA y 2006.10.30 Page 4 VLW1148LS PLCC-2 Type White LED (High Reliability type, White V-Series) Luminous Intensity Rank (Ta=25℃) Intensity Tolerance each Rank : +/-10% Rank B9 BX BY BZ C1 C2 C3 I V （ mcd） Condition MIN. MAX. 47 56 56 68 68 82 82 100 IF=10mA 100 120 120 150 150 180 ※ Please contact our sales staff concerning rank designation. 2006.10.30 Page 5 VLW1148LS PLCC-2 Type White LED (High Reliability type, White V-Series) Sorting Chart for Chromaticity Coordinates Chromaticity Coordinates Tolerance Each Rank : +/-0.01 LEFT DOWN point LEFT UP point RIGHT UP point RIGHT UP point Rank 1 2c 2d 2e 2f 3 x 0.280 0.287 0.296 0.307 0.311 0.330 y 0.248 0.295 0.276 0.315 0.294 0.318 x 0.264 0.283 0.287 0.304 0.307 0.330 y 0.267 0.305 0.295 0.330 0.315 0.360 x 0.283 0.304 0.307 0.330 0.330 0.361 y 0.305 0.330 0.315 0.360 0.339 0.385 x 0.296 0.307 0.311 0.330 0.330 0.356 y 0.276 0.315 0.294 0.339 0.318 0.351 Please contact our sales staff concerning rank designation. 2006.10.30 Page 6 VLW1148LS PLCC-2 Type White LED (High Reliability type, White V-Series) Technical Data Spectral Distribution Relative Intensity vs. Wavelength Condition : Ta = 25℃, IF = 10mA Spatial Distribution Example Condition : Ta = 25℃ Relative Intensity Wavelength [nm] Forward Voltage vs. Forward Current Condition : Ta = -40℃～85℃ Forward Current vs. Relative Intensity Condition : Ta = 25℃ Forward Current IF(mA) Forward Voltage VF(V) Forward Current IF(mA) Relative Intensity 2006.10.30 Page 7 VLW1148LS PLCC-2 Type White LED (High Reliability type, White V-Series) Technical Data Derating Ambient Temperature vs. Maximum Forward Current Repetition Frequency : f ≧ 10Hz Ambient Temperature vs. Relative Intensity Condition : IF=10mA Maximum Forward Current : IF MAX. (mA) Ambient Temperature : Ta(℃) Relative Intensity Ambient Temperature : Ta(℃) Ambient Temperature vs. Forward Voltage Forward Current vs. Chromaticity Condition : Ta = 25℃ Forward Voltage VF(V) y Ambient Temperature : Ta(℃) x 2006.10.30 Page 8 VLW1148LS PLCC-2 Type White LED (High Reliability type, White V-Series) Technical Data Ambient Temperature vs. Chromaticity Condition : IF = 10mA Duty Cycle vs. Maximum Forward Current x Maximum Forward Current : IF MAX. (mA) y Duty(%) 2006.10.30 Page 9 VLW1148LS PLCC-2 Type White LED (High Reliability type, White V-Series) Package Dimensions (Unit: mm) Weight: (8.0)mg Recommended Soldering Pattern (Unit: mm) Taping Specification ・Quantity: 3,000pcs/ reel (standard) (Unit: mm) 2006.10.30 Page 10 VLW1148LS PLCC-2 Type White LED (High Reliability type, White V-Series) Reflow Soldering Conditions 1) The above profile temperature gives the maximum temperature of the LED resin surface. Please set the temperature so as to avoid exceeding this range. 2) Total times of reflow soldering process shall be no more than 2 times. When the second reflow soldering process is performed, intervals between the first and second reflow should be short as possible (while allowing some time for the component to return to room temperature after the first reflow) in order to prevent the LED resin from absorbing moisture. 3) Temperature fluctuation to the LED during the pre-heating process shall be minimized. (6℃ maximum) Manual Soldering Conditions Iron tip temp. Soldering time and frequency 350 3s 1 time (MAX.) (MAX.) (MAX.) 2006.10.30 Page11 VLW1148LS PLCC-2 Type White LED (High Reliability type, White V-Series) Reliability Testing Result Reliability Testing Result Applicable Standard Room Temp. Operating Life High Temp. Operating Life Low Temp. Operating Life Wet High Temp. Operating Life Wet High Temp. Storage Life Thermal Shock Thermal Shock Operating High Temp. Storage Life Low Temp. Storage Life Cycled Temp. Humidity Operating Life Testing Conditions Ta = 25 ℃, IF = 2 0mA Ta = 85 ℃ ,IF = 1 0mA Ta = -40 ℃, IF = 2 0mA Ta = 60 ℃, 90%, IF = 2 0mA Ta = 60 ℃, 90% Ta = -40 ℃ ～ 1 10 ℃ ( each 15min.) Ta = -40 ℃(OFF) ～ 8 5 ℃(IF = 1 0mA ON) (each 15min.) Ta = 110 ℃ Ta = -40 ℃ Ta = -30 ℃ ～ 8 0 ℃, 95%, 8h/cycle Moisture Soak : 30 ℃, 70%, 168h Preheat : 150 ℃～180 ℃ ( 120s Max.) Soldering Temp. : 260 ℃ ( 5s) C = 100pF, R2 = 1.5KΩ, ±2,000V 98.1m/s ( 10G), 100 ～ 2 KHz, 20min. XYZ各 方向 2 Duration 1,000 h 1,000 h 1,000 h 1,000 h 1,000 h 1,000 cycles 1,000 cycles 1,000 h 1,000 h 30 cycles Twice once each polarity 2h Failure 0/20 0/20 0/20 0/20 0/20 0/20 0/20 0/20 0/20 0/20 0/20 0/20 0/20 EIAJ ED4701/100(101) EIAJ ED4701/100(101) EIAJ ED4701/100(101) EIAJ ED4701/100(102) EIAJ ED4701/100(103) EIAJ ED4701/100(105) EIAJ ED4701/100(105) EIAJ ED4701/200(201) EIAJ ED4701/200(202) EIAJ ED4701/200(203) EIAJ ED4701/300(301) EIAJ ED4701/300(304) EIAJ ED4701/400(403) Resistance to Reflow Soldering Electric Static Discharge ( ESD) Vibration, Variable Frequency ※1 ※1 Reference test Failure Criteria Items Luminous Intensity Forward Voltage Reverse Current Cosmetic Appearance Symbols Iv VF IR - Conditions IF=10mA IF=10mA VR=5V - Failure criteria Testing Min. Value ＜ Spec. Min. Value x 0.5 Testing Max. Value ≧ Spec. Max. Value x 1.2 Testing Max. Value ≧ Spec. Max. Value x 2.5 Occurrence of notable decoloration, deformation and cracking 2007.8.31 Page12 VLW1148LS PLCC-2 Type White LED (High Reliability type, White V-Series) Special Notice to Customers Using the Products and Technical Information Shown in This Data Sheet 1) The technical information shown in the data sheets are limited to the typical characteristics and circuit examples of the referenced products. It does not constitute the warranting of industrial property nor the granting of any license. 2) For the purpose of product improvement, the specifications, characteristics and technical data described in the data sheets are subject to change without prior notice. Therefore it is recommended that the most updated specifications be used in your design. 3) When using the products described in the data sheets, please adhere to the maximum ratings for operating voltage, heat dissipation characteristics, and other precautions for use. We are not responsible for any damage which may occur if these specifications are exceeded. 4) The products that have been described to this catalog are manufactured so that they will be used for the electrical instrument of the benchmark (OA equipment, telecommunications equipment, AV machine, home appliance and measuring instrument). The application of aircrafts, space borne application, transportation equipment, medical equipment and nuclear power control equipment, etc. needs a high reliability and safety, and the breakdown and the wrong operation might influence the life or the human body. Please consult us beforehand if you plan to use our product for the usages of aircrafts, space borne application, transportation equipment, medical equipment and nuclear power control equipment, etc. except OA equipment, telecommunications equipment, AV machine, home appliance and measuring instrument. 5) In order to export the products or technologies described in this data sheet which are under the “Foreign Exchange and Foreign Trade Control Law,” it is necessary to first obtain an export permit from the Japanese government. 6) No part of this data sheet may be reprinted or reproduced without prior written permission from Stanley Electric Co., Ltd. 7) The most updated edition of this data sheet can be obtained from the address below: http://www.stanley-components.com 2007.8.31 Page13