VUG1104B

1104B Series Single Color PLCC-2 Bathtub Type (High Reliability type, V-Series) Product features Package Product features PLCC-2 Bathtub Type. Water clear epoxy ・Outer Dimension 3.5 x 2.8 x 1.9mm( L x W x H ) ・Wide operation temperature range Storage Temperature : -40℃～110℃ Operating Temperature : -40℃～100℃ Operation Guarantee ・Ramification of luminosity group sorting. It is possible to have a uniform transmission with little irregularities even when several are lined up. ・Systematization of luminosity groups and color tone groups. Unified to a simple standard. ・Corresponding to a use requiring high reliability in cars etc… ・Spatial distribution characteristics. (2θ1/2 : 120deg) ・Lead–free soldering compatible ・RoHS compliant Blue Green Yellow Green Yellow Orange Red 120 deg. VUB,VUG : InGaN VUB : 4.4lm/W VYBG : 1.9lm/W VFY : 15.0lm/W VFV : 18.4lm/W VYBG, VYPY, VFY, VFA, VFV, VFR :AlGaInP VUG : 17.6lm/W VYPY : 7.1lm/W VFA : 15.0lm/W VFR : 13.8lm/W : : : : : : 470nm (VUB) 530nm (VUG) , 562nm(VYBG) 572nm (VYPY) 590nm (VFY) 605nm (VFA) 615nm (VFV) , 626nm (VFR) Dominant wavelength Spatial distribution Die materials Optical efficiency Rank grouping parameter Assembly methods (customer) Soldering methods Taping dimensions ESD Sorted by luminous intensity and wavelength and taped according to rank. Corresponding to surface mounter. Corresponding to reflow soldering and manual soldering. 2,000pcs(standard) per reel in a 8mm width tape. Reel diameter : φ180mm AlGaInP:2kV (HBM) InGaN:1kV (HBM) Recommended Applications SW lighting for car indicators, meter panel, car audio and heater control, etc… 2006.7.31 Page 1 1104B Series Single Color PLCC-2 Bathtub Type (High Reliability type, V-Series) Color Variations and Luminous Intensity Dominant Wavelength λ d (nm) TYP. IF MIN. (Ta=25℃) Part No. Material Emitted Color Lens Color Luminous Intensity Iv (mcd) MAX. IF Luminous Flux φ v(mlm) TYP. IF VUB1104B VUG1104B VYBG1104B VYPY1104B VFY1104B VFA1104B VFV1104B VFR1104B InGaN InGaN Blue 470 530 20 20 20 20 20 20 20 20 33 120 10 33 100 82 120 100 150 470 47 220 330 270 390 330 20 20 20 20 20 20 20 20 300 1,200 80 300 600 600 700 550 20 20 20 20 20 20 20 20 Green AlGaInP AlGaInP AlGaInP AlGaInP AlGaInP Red AlGaInP 626 ※Note : The luminous intensity(Iv) and dominant wavelength (λd) above are the setup values of the sorting machine. (Tolerance : IV… ±10%, λd ... ±1nm) 562 Yellow Green Yellow Orange Water Clear 572 590 605 615 2008.11.17 Page 2 1104B Series Single Color PLCC-2 Bathtub Type (High Reliability type, V-Series) Absolute Maximum Ratings Absolute Maximum Ratings VUB 78 20 50 0.4※ 2 1.0※ 2 5 VUG 78 20 50 0.4※ 2 1.0※ 2 5 VYBG 81 30 100 0.8 2.67 5 VYPY 81 30 100 0.8 2.67 5 VFY 81 30 100 0.8 2.67 5 VFA 81 30 100 0.8 2.67 5 VFV 81 30 100 0.8 2.67 5 (Ta=25℃) Item Power Dissipation Forward Current Pulse Forward Current ※ 1 Derating (Ta=72.5℃ or higher) Reverse Voltage Operating Temperature Storage Temperature Symbol Pd IF I FRM ⊿ IF ⊿ I FRM VR Topr Tstg VFR 81 30 100 0.8 2.67 5 Unit mW mA mA mA/ ℃ mA/ ℃ V ℃ ℃ -40～ +100 -40～ +110 ※1 I FRM M easurement condition : Pulse Width ≦1ms., Duty ≦ 1/ 20. ※2 Temperature Condition: Ta=60℃ or higher. Thermal Characteristics Ratings VUB 110 VUG 110 VYBG 110 VYPY 110 VFY 110 VFA 110 VFV 110 VFR 110 Item J unction Temperature (MAX.) Thermal Resistance (TYP.) (Junction/ ambient) Symbol Unit Tj ℃ R(th j-a) 350 350 400 400 400 2 400 400 400 ℃/ W ※Rth(j-a) M easurement Condition / Substrate: FR4(t=1.6mm) Pattern Size: 16mm . 2006.3.31 Page 3 1104B Series Single Color PLCC-2 Bathtub Type (High Reliability type, V-Series) Electro-Optical Characteristics （VUB,VUG) Item Conditions TYP. Forward Voltage IF=20mA VF MAX. Reverse Current Peak Wavelength Dominant Wavelength Spectral Line Half Width Half Intensity Angle VR=5V IF=20mA IF=20mA IF=20mA IF=20mA IR λp λd ⊿λ 2θ 1/ 2 MAX. TYP. TYP. TYP. TYP. 3.9 100 465 470 26 120 3.9 100 517 530 35 120 μA nm nm nm deg. Symbol Characteristic Ratings VUB 3.4 VUG 3.4 V Unit (Ta=25℃) ※Note: The dominant wave length (λd) above is the setup value of the sorting machine. （Tolerance : λd…±1nm） (Ta=25 Electro-Optical Characteristics（VYBG, VYPY, VFY, VFA, VFV, VFR) ℃) Characteristic Rating VYBG TYP. Forward Voltage IF=20mA VF MAX. Reverse Current Peak Wavelength Dominant Wavelength Spectral Line Half Width Half Intensity Angle VR=5V IF=20mA IF=20mA IF=20mA IF=20mA IR λp λd ⊿λ 2θ 1/ 2 MAX. TYP. TYP. TYP. TYP. 2.5 100 565 562 15 120 2.5 100 575 572 15 120 2.5 100 592 590 15 120 2.5 100 609 605 15 120 2.4 100 624 615 15 120 2.5 100 635 626 15 120 μA nm nm nm deg. 2.1 VYPY 2.1 VFY 2.0 VFA 2.0 VFV 1.9 VFR 2.0 V Item Conditions Symbol Unit ※Note: The dominant wave length (λd) above is the setup value of the sorting machine. （Tolerance : λd…±1nm） 2006.10.30 Page 4 1104B Series Single Color PLCC-2 Bathtub Type (High Reliability type, V-Series) Luminous Intensity Rank Standard Chart（Unit: mcd） Rank A9 AX AY AZ B1 B2 B3 B4 B5 B6 B7 B8 B9 BX BY BZ C1 C2 C3 C4 C5 C6 C7 C8 C9 CX CY CZ IV（ mcd） MIN. MAX. 4.7 5.6 5.6 6.8 6.8 8.2 8.2 10 10 12 12 15 15 18 18 22 22 27 27 33 33 39 39 47 47 56 56 68 68 82 82 100 100 120 120 150 150 180 180 220 220 270 270 330 330 390 390 470 470 560 560 680 680 820 820 1,000 VUB VUG VYBG VYPY VFY VFA VFV (Ta=25℃) VFR IF=20mA B1 B7 B8 B7 BZ C1 C2 C2 C4 C5 C6 C6 C1 C2 C7 C8 ※Limited width of luminous intensity rank is from Min.4 rank width. 2008.11.17 Page 5 1104B Series Single Color PLCC-2 Bathtub Type (High Reliability type, V-Series) Color Tone Groups (λd) 450nm (Ta=25℃) ( unit: nm ) Tolerance: +/-1nm VUB Type 470nm VUB Type (I F=20mA) A B MIN. 460.0 464.0 MAX. 464.0 468.0 VUG Type (I F=20mA) A B MIN. 515.0 520.0 MAX. 520.0 525.0 C 468.0 472.0 D 472.0 476.0 500nm C 525.0 530.0 D 530.0 535.0 VUG Type 530nm 550nm VYBG Type (I F=20mA) B C D MIN. 555.0 558.0 561.0 MAX. 558.0 561.0 564.0 VYPY Type (I F=20mA) A B C MIN. 567.0 570.0 573.0 MAX. 570.0 573.0 576.0 VFY Type (I F=20mA) D E MIN. 586.0 589.0 MAX. 589.0 592.0 VFA Type (I F=20mA) B C MIN. 600.0 603.0 MAX. 603.0 606.0 VFV Type (I F=20mA) B C MIN. 613.0 616.0 MAX. 616.0 619.0 VFR Type (I F=20mA) A B MIN. 620.0 626.0 MAX. 626.0 632.0 VYBG Type 562nm VYPY Type 572nm F 592.0 595.0 VFY Type 590nm 600nm D 606.0 609.0 VFA Type 605nm VFV Type 615nm VFR Type 626nm 650nm D 619.0 622.0 C 632.0 638.0 ※Limited width of color tone rank is from Min.3 to Min.4 rank width. (It changes with product.) 2008.9.12 Page 6 1104B Series Single Color PLCC-2 Bathtub Type (High Reliability type, V-Series) Characteristic Graph （VUB,VUG) Spectral Distribution Relative Intensity vs. wavelength 1.2 Condition:IF=20mA Ta=25℃ Spatial Distribution Example X-direction VUB VUG Condition: Ta=25℃ 1.0 Relative Intensity 0.8 0.6 0.4 0.2 0.0 400 450 500 550 600 Wavelength[nm] Forward Voltage vs. Forward Current Condition: Ta=25℃ Forward Current vs. Relative Intensity 　　　　　　　　　　　　　　　　　　　　　　　　　Condition:Ta=25℃ 100 1.5 Forward Current I F (mA) 10 VUB,VUG R elative Intensity 1.0 1 0.5 0.1 0.01 1.5 2.0 2.5 3.0 3.5 4.0 4.5 0.0 0 5 10 15 20 25 Forward Voltage : VF(V) Forward Current IF(mA) 2004.06.23 Page 7 1104B Series Single Color PLCC-2 Bathtub Type (High Reliability type, V-Series) Characteristics Chart（VUB,VUG) Derating Ambient Temp. vs. Maximum Forward Current Repetition Frequency：f ≧50Hz 60 Ambient Temp. vs. Relative Intensity Condition:IF=20mA 10.0 Duty=5% Maximum Forward Current : I F MAX. (mA) 50 40 Duty=20% 30 Relative Intensity Duty=10% VUB 1.0 VUG Duty=50% 20 DC 10 0 -40 0 .1 -20 0 20 40 60 80 100 120 -40 -20 0 20 40 60 80 100 Ambient Temperature : Ta (℃) Ambient Temp. Ta (℃ ) Dynamic Drive Rating Duty cycle vs. Maximum Forward Current Pulse Width vs. Maximum Tolerable Peak Current 10 Ambient Temp. : Ta=25℃ Maximum Forward Current : IF MAX.(mA) IF Peak MAX./IF DC MAX. 10kHz 1kHz 100Hz 50Hz 1 1 10 100 1000 10000 100000 Duty (%) Pulse Width : tw (μs ) 2008.1.18 Page 8 1104B Series Single Color PLCC-2 Bathtub Type (High Reliability type, V-Series) Characteristics Chart（VYBG,VYPY) Spectral Distribution Relative Intensity vs. wavelength Condition:IF=20mA 1.2 Spatial Distribution Example Ta=25℃ X-direction VYBG 1.0 Condition: Ta=25℃ VYPY Relative Intensity 0.8 0.6 0.4 0.2 0.0 500 520 540 560 580 600 620 Wavelength[nm] Forward Voltage vs. Forward Current Condition: Ta=25℃ 100 Forward Current vs. Relative Intensity Condition: Ta=25℃ 2.0 Forward Current I F (mA) Relative Intensity 1.5 10 VYBG VYBG VYPY 1 1.0 VYPY 0.5 0.1 1.5 1.7 1.9 2.1 2.3 2.5 0 .0 0 10 20 30 40 50 Forward Voltage: VF(V) Forward Current : IF (mA) 2004.06.23 Page 9 1104B Series Single Color PLCC-2 Bathtub Type (High Reliability type, V-Series) Characteristics Chart（VYBG,VYPY) Derating Ambient Temp. vs. Maximum Forward Current Repetition Frequency：f ≧ 50Hz 120 Ambient Temp. vs. Relative Intensity 10.0 Condition:IF=20mA Maximum Forward Current : I F MAX. (mA) Duty=5% 100 80 Duty=10% Duty=20% Duty=50% DC Relative Intensity 60 1.0 VYBG 40 VYPY 20 0 -40 -20 0 20 40 60 80 100 120 0 .1 -40 -20 0 20 40 60 80 100 120 Ambient Temp. : Ta (℃ ) Ambient Temp. : Ta (℃ ) Dynamic Drive Rating Duty cycle vs. Maximum Forward Current 100 Pulse Width vs. Maximum Tolerable Peak Current Ambient Temp. : Ta=25℃ 10 Maximum Forward Current : IF MAX.(mA) 10 IF Peak MAX./IF DC MAX. 10kHz 1kHz 100Hz 50Hz 1 1 10 Duty (%) 100 1 1 10 10 0 1 00 0 1 00 00 1 00 00 0 Pulse Width : tw (μs ) 2004.06.23 Page 10 1104B Series Single Color PLCC-2 Bathtub Type (High Reliability type, V-Series) Characteristics Chart（VFY,VFA,VFV,VFR) Spectral Distribution Relative Intensity vs. Wavelength Condition:IF=20mA Ta=25℃ Spatial Distribution Example X-direction Condition: Ta=25℃ Relative Intensity Wavelength[nm] Forward Voltage vs. Forward Current 100 Condition: Ta=25℃ Forward Current vs. Relative Intensity Condition: Ta=25℃ 2.0 Forward Current I F (mA) 10 Relative Intensity 1.5 VFY,VFA,VFV,VFR 1.0 VFY,VFA,VFV,VFR 1 0.5 0.1 1.0 1.5 2.0 2.5 3.0 0 .0 0 10 20 30 Forward Voltage : VF(V) Forward Current : IF (mA) 2006.10.30 Page 11 1104B Series Single Color PLCC-2 Bathtub Type (High Reliability type, V-Series) Characteristics Chart（VFY,VFA,VFV,VFR) Derating Ambient Temp. vs. Maximum Forward Current Repetition Frequency：f ≧ 50Hz 120 Ambient Temp. vs. Relative Intensity Condition:IF=20mA 10.0 Maximum Forward Current : I F MAX. (mA) Duty=5% 100 80 Duty=10% Duty=20% Duty=50% DC Relative Intensity 60 1.0 VFA VFV,VFR 40 VFY 20 0 -40 0 .1 -20 0 20 40 60 80 100 120 -40 -20 0 20 40 60 80 100 Ambient Temp. : Ta (℃ ) Ambient Temp. : Ta (℃ ) Dynamic Drive Rating Duty cycle vs. Maximum Forward Current 100 Pulse Width vs. Maximum Tolerable Peak Current Ambient Temp. : Ta=25℃ 10 Maximum Forward Current : IF MAX.(mA) 10 IF Peak MAX./IF DC MAX. 10kHz 1kHz 100Hz 50Hz 1 1 10 100 1 1 10 100 1000 10000 100000 Duty (%) Pulse Width : tw (μs ) 2006.3.31 Page 12 1104B Series Single Color PLCC-2 Bathtub Type (High Reliability type, V-Series) Package Dimensions (Unit: mm) Weight: (36.30)mg Recommended Soldering Pattern (Unit: mm) Taping Specification Quantity: 2,000pcs/ reel (standard) (Unit: mm) 2005.9.28 Page 13 1104B Series Single Color PLCC-2 Bathtub Type (High Reliability type, V-Series) Reflow Soldering Conditions 1) The above profile temperature gives the maximum temperature of the LED resin surface. Please set the temperature so as to avoid exceeding this range. 2) Total times of reflow soldering process shall be no more than 2 times. When the second reflow soldering process is performed, intervals between the first and second reflow should be short as possible (while allowing some time for the component to return to normal temperature after the first reflow) in order to prevent the LED from absorbing moisture. 3) Temperature fluctuation to the LED during the pre-heating process shall be minimized. (6℃ maximum) Manual Soldering Conditions Iron tip temp. Soldering time and frequency 350 3s 1 time (MAX.) (MAX.) (MAX.) 2004.09.06 Page14 1104B Series Single Color PLCC-2 Bathtub Type (High Reliability type, V-Series) Reliability Testing Result Reliability Testing Result Applicable Standard Room Temp. Operating Life High Temp. Operating Life Low Temp. Operating Life Wet High Temp. Operating Life Wet High Temp. Storage Life Thermal Shock Thermal Shock Operating High Temp. Storage Life Low Temp. Storage Life Cycled Temp. Humidity Life Resistance to Reflow Soldering Electric Static Discharge (ESD)※ Vibration, Variable Frequency 1 Testing Conditions Ta = 25℃, IF = M axium Rated Current Ta = Maximum Rated Operating Temperature, IF = Derating Value Ta = -40℃, IF = M axium Rated Current Ta = 60℃, 90%, IF = M axium Rated Current Ta = 60℃, 90% Ta = -40℃ ～ M aximum Rated Storage Temperature (each 15min.) Ta = -40℃(off) ～ 85 ℃ (IF = Derating Value on), (each 15min.) Ta = Maximum Rated Storage Temperature Ta = Minimum Rated Storage Temperature Ta = -30℃(2h) ～ 80 ℃, 95%(2h), 8h/ cycle, IF = Derating Value, 5min on-off Moisture Soak : 30℃, 70%, 72h Preheat : 150 ～ 180℃(120s Max.) Soldering Temp. : 260 ℃(5s) C = 100pF, R2 = 1.5KΩ, ±2,000V 98.1m/ s (10G), 100 ～ 2KHz, 20min, XYZ each direction 2 Duration Failure EIAJ ED4701/ 100(101) EIAJ ED4701/ 100(101) EIAJ ED4701/ 100(101) EIAJ ED4701/ 100(102) EIAJ ED4701/ 100(103) EIAJ ED4701/ 100(105) EIAJ ED4701/ 100(105) EIAJ ED4701/ 200(201) EIAJ ED4701/ 200(202) EIAJ ED4701/ 200(203) EIAJ ED4701/ 300(301) EIAJ ED4701/ 300(304) EIAJ ED4701/ 400(403) 1,000 h 0/ 20 1,000 h 0/ 20 1,000 h 0/ 20 1,000 h 0/ 20 1,000 h 0/ 20 1,000 cycles 0/ 20 1,000 cycles 0/ 20 1,000 h 0/ 20 1,000 h 0/ 20 30 cycles 0/ 20 Twice 0/ 20 once each polarity 0/ 10 2 h 0/ 10 ※1 Reference test Failure Criteria Items Luminous Intensity Forward Voltage Reverse Current Cosmetic Appearance Symbols Iv VF IR - Conditions IF Value of each product Luminous Intensity IF Value of each product Forward Voltage VR = M aximum Rated Reverse Voltage V - Failure criteria Testing Min. Value ＜ Spec. Min. Value x 0.5 Testing Max. Value ≧ Spec. Max. Value x 1.2 Testing Max. Value ≧ Spec. Max. Value x 2.5 Occurrence of notable decoloration, deformation and cracking 2007.8.31 Page 15 1104B Series Single Color PLCC-2 Bathtub Type (High Reliability type, V-Series) Special Notice to Customers Using the Products and Technical Information Shown in This Data Sheet 1) The technical information shown in the data sheets are limited to the typical characteristics and circuit examples of the referenced products. It does not constitute the warranting of industrial property nor the granting of any license. 2) For the purpose of product improvement, the specifications, characteristics and technical data described in the data sheets are subject to change without prior notice. Therefore it is recommended that the most updated specifications be used in your design. 3) When using the products described in the data sheets, please adhere to the maximum ratings for operating voltage, heat dissipation characteristics, and other precautions for use. We are not responsible for any damage which may occur if these specifications are exceeded. 4) The products that have been described to this catalog are manufactured so that they will be used for the electrical instrument of the benchmark (OA equipment, telecommunications equipment, AV machine, home appliance and measuring instrument). The application of aircrafts, space borne application, transportation equipment, medical equipment and nuclear power control equipment, etc. needs a high reliability and safety, and the breakdown and the wrong operation might influence the life or the human body. Please consult us beforehand if you plan to use our product for the usages of aircrafts, space borne application, transportation equipment, medical equipment and nuclear power control equipment, etc. except OA equipment, telecommunications equipment, AV machine, home appliance and measuring instrument. 5) In order to export the products or technologies described in this data sheet which are under the “Foreign Exchange and Foreign Trade Control Law,” it is necessary to first obtain an export permit from the Japanese government. 6) No part of this data sheet may be reprinted or reproduced without prior written permission from Stanley Electric Co., Ltd. 7) The most updated edition of this data sheet can be obtained from the address below: http://www.stanley-components.com 2007.8.31 Page 16