YPY1113F-1215-TR

Standard Product Specifications YPY1113F-1215-TR Features Package Smaller, thinner, side view package, Milky white resin Product features ・Outer dimension 2.1 x 1.0 x 0.6mm ( L x W x H ) ・Lead-free soldering compatible ・RoHS2 compliant Recommended Applications ・Amusement machine, Home appliances, OA/FA use, Various indicators, etc. 2014.5.6 Page : 1 Outline Dimensions YPY1113F-1215-TR ：mm ：2.1mg ：±0.1 Unit Weight Tolerance Anode Polarity Mark Cathode Front view Top view Rear view No. PART NAME MATERIAL QTY. ① LED Die AlGaInP 1 ② Mold Resin Epoxy Resin 1 ③ Substrate Glass Fabrics 1 Recommended Pad Unit：mm Example of mounting 2014.5.6 Page : 2 Specifications YPY1113F-1215-TR 【 Product Overview 】 Die Material AlGaInP Emitting Color Yellow Green Resin Color Milky white 【 Absolute Maximum Ratings 】 (Ta=25℃) ITEM SYMBOL MAXIMUM RATINGS UNITS Power Dissipation Pd 36 mW Forward Current IF 15 mA Repetitive Peak Forward Current “Pulse width≦1ms, Duty≦1/20duty" IFRM 48 mA IF Derate Linearly from “25℃" ΔIF 0.21 mA/℃ IFRM Derate Linearly from “25℃“ “Pulse width≦1ms, Duty≦1/20duty" ΔIFRM 0.69 mA/ ℃ Reverse Voltage VR 5 V Operating Temperature Topr -40 ～ +85 ℃ Storage Temperature Tstg -40 ～ +100 ℃ Soldering Temperature "Reflow Soldering" Tsld Note1 260 Note1 ℃ a Please refer to page 8, Soldering conditions. 【 Electro and Optical Characteristics 】 (Ta=25℃) ITEM SYMBOL CONDITIONS MIN. TYP. MAX. UNITS Forward Voltage VF IF = 5mA - 1.9 2.4 V Reverse Current IR VR = 5V - - 100 μA Luminous Intensity IV IF = 5mA 6.3 10.0 25.0 mcd Peak Wavelength λp IF = 5mA - 575 - nm Dominant Wavelength λd IF = 5mA 566 572 578 nm Spectral Line Half Width Δλ IF = 5mA - 15 - nm Above the table of Luminous Intensity (Iv) and Dominant Wavelength (λd) are range of actual measuring value of the production line of STANLEY ELECTRIC. 【Tolerance : Iv…±10%, λd…±1nm】 2014.5.6 Page : 3 Specifications YPY1113F-1215-TR 【 Sorting For Luminous Intensity and Dominant Wavelength 】 LED's shall be sorted out into the following ranks of Luminous Intensity and Dominant Wavelength. Dominant Wavelength (λd) Rank Luminous Intensity (Iv) Rank Rank B IV (mcd) MIN. MAX. 6.3 10.0 C 10.0 16.0 D 16.0 25.0 Notes 2014.5.6 Conditions IF=5mA Ta=25℃ Rank λd (nm) MIN. MAX. A 566 569 B 569 572 C 572 575 D 575 578 Conditions IF=5mA Ta=25℃ Above the table of Luminous Intensity (Iv) and Dominant Wavelength (λd) are range of actual measuring value of the production line of STANLEY ELECTRIC. 【Tolerance : Iv…±10%, λd…±1nm】 Page : 4 Technical Data YPY1113F-1215-TR Wavelength vs. Relative Intensity Conditions: Ta = 25℃, IF =5mA 1.2 Relative Intensity 1.0 0.8 0.6 0.4 0.2 0.0 380 430 480 530 580 630 680 730 780 Wavelength : (nm) Spatial Distribution Conditions: Ta = 25℃, IF=5mA x y x direction y direction Relative Radiant Intensity : (%) 2014.5.6 Page : 5 Technical Data YPY1113F-1215-TR Forward Current vs. vs. Relative Intensity Forward Voltage vs. Forward Current Condition : Ta = 25℃ Condition : Ta = 25℃ 100 3.5 Relative Intensity Forward Current IF (mA) 3.0 10 1 2.5 2.0 1.5 1.0 0.5 0.0 0.1 1.4 1.6 1.8 Forward Voltage VF(V) 2.0 0 2.2 10 15 20 Forward Current IF(mA) Ambient Temperature vs. Forward Voltage Ambient Temperature vs. Relative Intensity Condition : IF =2～15mA Condition : IF= 5mA 2.2 10 IF=15m Relative Intensity Forward Voltage VF(V) 5 2.0 IF=5mA 1 1.8 IF=2mA 0.1 1.6 -40 2014.5.6 -20 0 20 40 60 Ambient Temperature: Ta(℃) 80 100 -40 -20 0 20 40 60 Ambient Temperature: Ta(℃) 80 100 Page : 6 Technical Data YPY1113F-1215-TR Ambient Temperature vs. Power Dissipation Ambient Temperature vs. Maximum Forward Current Repeatition Frequency：f≧50Hz/Pulse Width：tw≦1ms 40 Maximum Forward Current IF MAX (mA) 60 Power Dissipation : Pd (mW) 35 30 25 20 15 10 50 Duty=5% 40 Duty=10 Duty=20 30 Duty=50 20 DC 10 5 0 -40 -20 0 20 40 60 Ambient Temperature : Ta (℃) 80 0 100 -40 -20 0 20Temperature 40 60 80 Ambient : Ta(℃) 100 Pulse Width vs. Maximum Tolerable Peak Current Duty cycle vs. Maximum Forward Current Condition：Ta=25℃ Condition：Ta=25℃ Maximum Forward Current: IFRM MAX. (mA) IF peak Max. / IF DC Max. 10 3.2 10kHz 1kHz 100Hz 50Hz 100 10 1 1 1 2014.5.6 Width : tw1,000 (μs) 10 Pulse 100 1 10,000 100,000 10 Duty(%) 100 Page : 7 Soldering conditions YPY1113F-1215-TR 1. Reflow Soldering 【Recommended Reflow Soldering Condition.】 Peak Temperature (Soldering） 260℃ MAX. +1.5～+5℃/s -1.5～-5℃/s 230℃ MAX. 90~120sec （ Pre-heating） 150℃～180℃ 40sec MAX. 1. The above temp. profile shall be at the surface of LED resin. 2. The number of reflow process shall be 2 time MAX. If second reflow process would be performed, intervals between first and second process shall be as short as possible to prevent absorption of moisture to resin of LED. Cooling process to normal temp. shall be required between first and second reflow process. 3. Temp. fluctuation to LED at pre-heat process shall be minimized. 2. Manual Soldering (Soldering iron) Temperature of Iron Tip 350℃MAX. Soldering Duration, Time 3sec.MAX.,1 time ※ The number of manual soldering process shall be 1 time. 3. Other Caution 1. As manual soldering, please heat the solder pad, should not contact a tip of iron to a product (especially resin). 2. Heat or UV(or both) curing resin shall used for preliminary fixing. Curing condition temp. : 150 ℃ MAX. , time : 120s MAX. 3. After soldering, any mechanical force or any excess vibration shall not be accepted to apply during cooling process to normal temp. 2014.5.6 Page : 8 Handling Precaution YPY1113F-1215-TR 1. Cleaning 1. Special care shall be taken when applying the chemicals listed below for cleaning because certain chemicals may damage the surface of lens or care and cause discoloration. Cleaning agents Recommended / Not recommended Isopropyl alcohol Ethyl　alcohol Pure water Trichloroethylene Chlorothene Acetone Thinner x x x x Recommended Recommended Recommended Not recommended Not recommended Not recommended Not recommended ※ Dipping time is 3minutes MAX. (In normal temp.) ※ It can be cleaned on the next page conditions, about pure water. 2. Effect of ultrasonic cleaning on the LED resin body differs depending on such factors as the oscillator output, size of P.C.B. and LED mounting method. So the use of ultrasonic cleaning is strongly recommended after confirming that there is no problem. 3. When using Freon equivalent solvent, discoloration on the LED surface may be caused by one of the first confirming that there is no problem. ※ Freon substitute detergent ・Clean through 750H ・Pine alpha ST-100S 4. In the case of water-washing , ensure to use pure water (not city water) and , immediately after the washing is over, apply forced drying to remove all the moisture from the LED. 2. Warrant period Within 6 month by following conditions. Un-opened, +5～+30℃/ 70% MAX. 3. Handling after opened 1. In case of no-using promptly or on the way to using, LEDs should be restored following conditions and the bag should be fastened the zip lock to prevent absorption of moisture to resin of LEDs. +5～+30℃/ 70% MAX. 2. Unpacked LEDs should be stored under the following conditions. LEDs must be soldered on board within 72h whether they are restored in the bag or not. +5～+30℃/ 70% MAX. 3. In any case over 72h has past after opening the bag or the indicator color of the desiccant has changed(Blue→Pink), baking should be performed under the following conditions. +60±5℃, 10～12 hours 2014.5.6 Page : 9 Handling Precaution YPY1113F-1215-TR 【 Other Precautions 】 1. Stanley LED Lamps have semiconductor characteristics and are designed to ensure high reliability. However, the performance may vary depending on usage conditions 2. Absolute Maximum Ratings are set to prevent LED lamps from failing due to excess stress( temperature, current, voltage, etc.). Usage conditions must not exceed the ratings for a moment, nor do reach one item of absolute maximum ratings simultaneously. 3. In order to ensure high reliability from LED Lamps, variable factors that arise in actual usage conditions should be taken into account for designing. ( Derating of TYP., MAX Forward Voltage, etc.) 4. Please insert protective resistors into the circuit in order to stabilize LED operation and to prevent the device from igniting due to excess current. 5. Please check the actual performance in the assembly because the Specification Sheets are described for LED device only. 6. Please refrain from looking directly at the light source of LED at high output, as it may harm your vision. 7. The products are designed to operate without failure in recommended usage conditions. However, please take the necessary precautions to prevent fire, injury, and other damages should any malfunction or failure arise. 8. The products are manufactured to be used for ordinary electronic equipment. Please contact our sales staff beforehand when exceptional quality and reliability are required, and the failure or malfunction of the products might directly jeopardize life or health ( such as for airplanes, aerospace, transport equipment, medical applications, nuclear reactor control systems and so on). 9. When there is a process of supersonic wave welding etc. after mounting the product, there is a possibility of affecting on the reliability of junction part in package (junction part of die bonding and wire bonding). Please make sure there is no problem before using. 10. The formal specification sheets shall be valid only by exchange of documents signed by both parties. 2014.5.6 Page : 10 Packaging Specifications YPY1113F-1215-TR 【Moisture-proof Packaging Specification】 Fastener for re-storage after opening bag. Customer's opening position. A Product Label Heat sealed after packaging. Desiccant with indicator for moisture level is enclosed. 1 SYM. PART NAME MATAL. REMARKS ① Moisture-proof bag with Aluminum layer PET+Al+PE with ESD protection 2． Packaging Box Specifications Flow chart：Package Opening to Mounting Flow Chart-package Opening to Mounting Stored under recommended condition Moisture-proof package first time opening Allowable leaving time exceeded (*) Yes No Discoloration of silica gel Yes No Baking LED under recommended condition Allowable leaving time means the maximum allowable leaving time after opening package, which depends on each LED type. The allowable leaving time should be calculated form the first opening of package to the time when soldering process is finished. When judging if the allowable leaving time has exceeded or not, please subtract the soldering time. The allowable leaving time after reopening should be calculated form the first opening of package, or from the time when baking process is finished. Product Mounting Unused-product remained Yes Return to moisture-proof package and seal No Finished Reopen the moisture-proof package 2014.5.6 Page : 11 Packaging Specifications YPY1113F-1215-TR 【 Packing box 】 (RoHS2・ELV Compliant) Box TYPE Outline dimension L × W × H (mm) Capacity of the box Type A 280 × 265 × 45 (mm) 3 reels Type B 310 × 235 × 265 (mm) 15 reels Type C 440 × 310 × 265 (mm) 30 reels The above measure is all the reference value. The box is selected out of the above table, by the shipping quantity. B ② Type A Material / box ： Cardboard C5BF 2014.5.6 Type B,C Material / box ： Cardboard K5AF Partition ： Cardboard K5AF No. PART NAME MATERIAL REMARKS ② Packing Box Corrugated Cardboard without ESD protection Page : 12 Packaging Specifications YPY1113F-1215-TR 【 Label Specification】 ( acc.to ; JIS-X0503(Code-39) A Product label A. Parts number (Indicated the whole parts number) B. Bar-code for parts number C. Parts code (In-house identification code for each parts number) D. Packed parts quantity (Indicated Parts Qty in the packing) E. Bar-Code for packed parts quantity F. Lot number & Rank (indicated the following 16 digits) G. Bar-Code for Lot number & Rank B Opto device label A. Custmer Name B. Parts Type C. Parts Code D. Parts Number E. Packed Parts Quantity F. Carton Number G. Shipping Date H. Bar-Code for In-house identification Number Bar-code font : acc.to Code-39(JIS-X0503) 2014.5.6 Page : 13 Lot Number Notational System ① ② ③ YPY1113F-1215-TR ④ ⑤ ⑥ ⑦ ⑧ ⑨ ① - 1digit ： Production Location (Mark identify alphabet) ② - 1digit ： Production Year (Last Digit of Production Year shall be indicate as 2020→0, 2021→1, 2022→2,･･･) ③ - 2digits ： Production Month (Jan. to Sep. ,shall be indicated as 01,02,03,･････) ④ - 2digits ： Production Date ⑤ - 3digits ： Serial Number ⑥ - 2digits ： Tape and Reel following Number ⑦ - 2digits ： Luminous Intensity Rank. (If luminous intensity rank is 1 digit, "-" shall be dashed on the place for the second digit. If there is no identified rank, "- -" shall be used to indicate.) ⑧ - 2digits ： Color Rank (If chromaticity rank is 1 digit, "-" shall be dashed on the place for the second digit. If there is no identified rank, "- -" shall be used to indicate.) ⑨ - 1digit ： Option Rank (Stanley normally print "-" to indicate.) 2014.5.6 Page : 14 Taping and Reel Specifications YPY1113F-1215-TR (acc.to ; JIS-C0806-03） 1. Appearance Note "-TR" means Cathode Side of LEDs should be placed on the sprocket-hole side. Items Remarks Cover-tape Cover-tape shall be longer than 200mm without carrier-tape The end of cover-tape shall be held with adhesive tape. Carrier-tape Empty pocket shall be more than 10 pieces. Please refer to the above figure for Taping & reel orientation. Empty pocket shall be more than 15 pieces. The end of taping shall be inserted into a slit of the hub. Leader area Trailer area 2014.5.6 Specifications Page : 15 Taping and Reel Specifications YPY1113F-1215-TR 2. Qty. per Reel 4,000 pcs./reel 3. Mechanical strength Cover-tape adhesive strength shall be 0.1～1.0N ( An angle between carrier-tape and cover-tape shall be170 deg. ) Both tapes shall be so sealed that the contained parts will not come out from the tape when it is bent at a radius of 15mm. 4. Others Reversed-orientation, Up-side down placing, side placing and out of spec. parts mix shall not be held. No more than 1 connecting empty pockets of taping. Empty Pocket per reel is assumed until 5piece. 2014.5.6 Page : 16 Taping and Reel Specifications YPY1113F-1215-TR Unit：mm (acc.to ; JIS-C0806） 5. Taping Dimensions Center hole Center hole 6. Reel Dimensions ③ 9±0.2 11.4±0.1 2014.5.6 NO. PART NAME REMARKS ① Carrier-tape Conductive Grade ② Cover-tape Anti-Static Grade ③ Carrier-reel Conductive Grade Page : 17 Correspondence to RoHS2 / ELV instruction YPY1113F-1215-TR This product is in compliance with RoHS2 / ELV. Prohibition substance and it's criteria value of RoHS2 / ELV are as follows. ・RoHS2 instruction 　…　Refer to following 1 to 10. ・ELV instruction 　…　Refer to following 1 to 4. No. 2014.5.6 Substances Threshold 1 Lead and its compounds 0.1% (1,000ppm) 2 Mercury and its compounds 0.1% (1,000ppm) 3 Cadmium and its compounds 0.01% (100ppm) 4 Hexavalent chromium compounds 0.1% (1,000ppm) 5 PBB : Polybrominated Biphenyls 0.1% (1,000ppm) 6 PBDE : Polybrominated Biphenyl Ethers 0.1% (1,000ppm) 7 DEHP : Bis (2-ethylhexyl) phthalate 0.1% (1,000ppm) 8 BBP : Butyl benzyl phthalate 0.1% (1,000ppm) 9 DBP : Dibutyl phthalate 0.1% (1,000ppm) 10 DIBP : Diisobutyl phthalate 0.1% (1,000ppm) Page : 18 YPY1113F-1215-TR Reliability Testing Result Reliability Testing items Applicable Standard Room Temp. Operating Life EIAJ ED4701/100(101) Ta = 25℃, IF = 15mA 1,000 h 0/25 Resistance to Soldering Heat EIAJ ED4701/300(301) Pre-heating : 150～180℃ 120s M ax. Operation Heating : 230℃ 40s M ax. Peak Temperature : 260℃ 2 times 0/25 Temperature Cycling EIAJ ED4701/100(105) -40℃ (30min) ～ Normal Temperature(15min) ～ +100℃ (30min) ～ Normal Temperature(15min) 5 cycles 0/25 Wet High Temp. Storage Life High Temp. Storage Life Low Temp. Storage Life EIAJ ED4701/100(103) EIAJ ED4701/200(201) EIAJ ED4701/200(202) Ta = 60±2℃, RH = 90±5% 1,000 h 0/25 Ta = +100℃±2℃ 1,000 h 0/25 Ta = -40℃±2℃ 1,000 h 0/25 Vibration, Variable Frequency EIAJ ED4701/400(403) 2h 0/10 Testing Conditions Duration Failure 2 98.1m/s (10G), 100 ～ 2KHz sweep for 20min., XYZ each direction Failure Criteria Items Symbols Conditions Failure criteria Luminous Intensity Iv 5mA Testing M in. Value ＜ Spec. M in. Value x 0.5 Forward Voltage VF 5mA Testing M ax. Value ≧ Spec. M ax. Value x 1.2 Reverse Current IR 5V Testing M ax. Value ≧ Spec. M ax. Value x 2.5 Cosmetic Appearance - - Occurrence of notable decoloration, deformation and cracking 2014.5.6 Page : 19 YPY1113F-1215-TR Special Notice to Customers Using the Products and Technical Information Shown in This Data Sheet 1) The technical information shown in the data sheets are limited to the typical characteristics and circuit examples of the referenced products. It does not constitute the warranting of industrial property nor the granting of any license. 2) For the purpose of product improvement, the specifications, characteristics and technical data described in the data sheets are subject to change without prior notice. Therefore it is recommended that the most updated specifications be used in your design. 3) When using the products described in the data sheets, please adhere to the maximum ratings for operating voltage, heat dissipation characteristics, and other precautions for use. We are not responsible for any damage which may occur if these specifications are exceeded. 4) The products that have been described to this catalog are manufactured so that they will be used for the electrical instrument of the benchmark (OA equipment, telecommunications equipment, AV machine, home appliance and measuring instrument). The application of aircrafts, space borne application, transportation equipment, medical equipment and nuclear power control equipment, etc. needs a high reliability and safety, and the breakdown and the wrong operation might influence the life or the human body. Please consult us beforehand if you plan to use our product for the usages of aircrafts, space borne application, transportation equipment, medical equipment and nuclear power control equipment, etc. except OA equipment, telecommunications equipment, AV machine, home appliance and measuring instrument. 5) In order to export the products or technologies described in this data sheet which are under the “Foreign Exchange and Foreign Trade Control Law,” it is necessary to first obtain an export permit from the Japanese government. 6) No part of this data sheet may be reprinted or reproduced without prior written permission from Stanley Electric Co., Ltd. 7) The most updated edition of this data sheet can be obtained from the address below: http://www.stanley-components.com/en/ 2014.5.6 Page : 20