0
登录后你可以
  • 下载海量资料
  • 学习在线课程
  • 观看技术视频
  • 写文章/发帖/加入社区
会员中心
创作中心
发布
  • 发文章

  • 发资料

  • 发帖

  • 提问

  • 发视频

创作活动
SP9718

SP9718

  • 厂商:

    STANSON(司坦森)

  • 封装:

  • 描述:

    SP9718 - 1.5A LOW-NOISE PWM STEP-DOWN REGULATOR - Stanson Technology

  • 详情介绍
  • 数据手册
  • 价格&库存
SP9718 数据手册
SP9718 1.5A LOW-NOISE PWM STEP-DOWN REGULATOR DESCRIPTION The SP9718 is low-noise pulse-width-modulated, DC-DC step-down converter. It powers logic and transmitters in small wireless systems such as cellular phones, communicating PDAs, and handy-terminals. The device features an internal synchronous rectifier for high efficiency; it requires no external Schottky diode. Excellent noise characteristics and fixed-frequency operation provide easy post-filtering. The SP9718 is ideally suited for Li-Ion battery applications. It is also useful for +3V or +5V fixed input applications. The device operates in one of four modes. Forced PWM mode operates at a fixed frequency regardless of the load. Shutdown mode places the device in standby, reducing quiescent supply current to under 0.1μA. The SP9718 can deliver over 1.5A. The output voltage can be adjusted from VREF to VIN. The input range is from 2.0V to 5.0V. Other features of the SP9718 include high efficiency, low dropout voltage. It is available in a space-saving 8-pin SOP package. FEATURES • 1.2MHz switching and synchronization • Dynamic output-voltage adjustment from VREF to VIN • 1.5A Guaranteed Output Current • 95% Efficiency • No Schottky Diode Required • External Soft Start • 8-pin PSOP power packages APPLICATIONS • Cellular Phone • Cordless Phone • PDAs and Handy-Terminals • CPU I/O Supplies • Notebook Chipset Supplies • Battery Operated Devices • ADSL PIN CONFIGURATION ( SOP-8 Power Pad ) PART MARKING 2007/12/20 Ver.1 Page 1 SP9718 1.5A LOW-NOISE PWM STEP-DOWN REGULATOR TYPICAL APPLCATION CIRCUIT PIN DESCRIPTION & ELECTRICAL CHARACTERISTICS Pin 1 2 3 4 5 6 7 8 Symbol VIN GND SD VREF VFB PGND LX PVIN Description Voltage supply for internal circuits Ground for internal reference voltage divider CMOS input level VOUT Set Voltage Feedback node for the VOUT Ground for output power transistors Inductor connection to the Drains of the internal power MOSFETs Voltage supply for output power transistors 2 2.5 5.5 5.5 V V Shutdown level Enable level 0.75 x VIN 0 1.1 VREF VIN + 0.3 V 2.0 VIN V V Operating Rating Min. Typ. Max. 2 2.5 5.5 Unit V 2007/12/20 Ver.1 Page 2 SP9718 1.5A LOW-NOISE PWM STEP-DOWN REGULATOR BLOCK DIAGRAM V IN 1 1 SD 3 P V IN 8 GND 2 O s c illa to r R a m p G en e rator P W M C o ntroller T h erm a l P ro te c tion MOS 7 LX VREF 4 E rror A m p 5 VFB 6 PGND ORDERING INFORMATION Part Number Package Part Marking SP9718 SP9718 SP9718SP8RG SOP-8 ( Power Pad ) SP9718SP8TG SOP-8 ( Power Pad ) ※ SP9718SP8RG : 7” Tape Reel ; Pb – Free ※ SP9718SP8TG : Tube ; Pb – Free ABSOULTE MAXIMUM RATINGS (TA=25℃, unless otherwise specified.) The following ratings designate persistent limits beyond which damage to the device may occur. Symbol Parameter Value Unit VIN PVIN IOUT TJ TSTG TLEAD Tope RӨJC DC Supply Voltage PVIN Operating Range Output Current, Source or Sink Operating Junction Temperature Range Storage Temperature Range Lead Soldering Temperature for 5 sec. Operation Temperature Range Thermal Resistance Junction – Case (*) -0.3 ~ 6.0 2.0 ~ 4.0 1.5 150 -65 to 150 260 -40 ~ 85 50 V V A ℃ ℃ ℃ ℃ ℃/W 2007/12/20 Ver.1 Page 3 SP9718 1.5A LOW-NOISE PWM STEP-DOWN REGULATOR ELECTRICAL CHARACTERISTICS (Unless otherwise stated, these specifications apply TA=25°C; VIN=+3.3V and PVIN=+3.3V) Symbol Parameter SWITCHING REGULATOR VREF Adjustable Output Voltage fsw Switching Frequency IOUT(RMS) Maximum Output RMS Current IOUT(PEAK) Maximum Output Peak Current MOSFETs RDS(ON) Drain to Source on-State Resistance SUPPLY IVIN IPVIN Quiescent Current Conditions Min. VREF 1.2 1.5 3 PVIN=5V VFB = 1.4V LC unconnected VFB = 1.4V LC unconnected 250 220 500 Typ. Max. VIN Unit V MHz A A mΩ μA μA 2007/12/20 Ver.1 Page 4 SP9718 1.5A LOW-NOISE PWM STEP-DOWN REGULATOR PERFORMANCE CHARACTERISTICS (TA=25℃, unless otherwise specified.) LOAD REGULATION Vin = 5V, VREF Input = 1.09V 2 5 Vin = 5V , VREF Input = 4.04V Vout(V) 1 Vout(V) 4 0 0.05 0.2 0.4 0.6 Iout(A) 0.8 1 3 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 0.05 Iout(A) 1.5 LOAD TRANSIENT RESPONSE Transient Response VREF=1V, (IOUT from 1.5A- 0A) Transient Response VREF=1V, (IOUT from 0A- 1.5A) Transient Response VREF=4V,(IOUT from 1.5A- 0A) Transient Response VREF=4V,(IOUT from 0A- 1.5A) 2007/12/20 Ver.1 Page 5 SP9718 1.5A LOW-NOISE PWM STEP-DOWN REGULATOR PERFORMANCE CHARACTERISTICS (TA=25℃, unless otherwise specified.) VOUT OUTOUT RIPPLE AND NOISE VREF=1V, Load=0.5A VREF=1V, Load=1.0A VREF=1V, Load=1.5A VREF=4V, Load=0.5A VREF=4V, Load=1.0A VREF=4V, Load=1.5A VOLTAGE SETTING STEP RESPONSE VREF=1V-4V, Load=0.5A VREF=1V-4V, Load=1.0A VREF=1V-4V, Load=1.5A VREF=4V-1V, Load=0.5A VREF=4V-1V, Load=1.0A VREF=4V-1V, Load=1.5A 2007/12/20 Ver.1 Page 6 SP9718 1.5A LOW-NOISE PWM STEP-DOWN REGULATOR PERFORMANCE CHARACTERISTICS (TA=25℃, unless otherwise specified.) IN-RUSH CURRENT Vin=5V, VREF=1V, Load=1.5A, Ip-p=1.81A Vin=5V, VREF=4V, Load=1.5A, Ip-p=1.81A EFFICIENCY efficiency (VOUT=1V, load from 0.05A~1.5A) efficiency (VOUT =4V, load from 0.05A~1.5A) 100.0% 95.0% 90.0% Efficiency 80.0% 75.0% 70.0% 65.0% 60.0% Efficiency 85.0% 0. 05 0. 6 0. 2 0. 4 0. 8 1 100.0% 98.0% 96.0% 94.0% 92.0% 90.0% 88.0% 86.0% 84.0% 82.0% 80.0% 0.05 0.2 0.4 0.6 Iout(A) 0.8 1 Iout(A) 2007/12/20 Ver.1 Page 7 SP9718 1.5A LOW-NOISE PWM STEP-DOWN REGULATOR SOP- 8 Power Pad PACKAGE OUTLINE 2007/12/20 Ver.1 Page 8 SP9718 1.5A LOW-NOISE PWM STEP-DOWN REGULATOR Information provided is alleged to be exact and consistent. SYNC Power Corporation presumes no responsibility for the penalties of use of such information or for any violation of patents or other rights of third parties, which may result from its use. No license is granted by allegation or otherwise under any patent or patent rights of SYNC Power Corporation. Conditions mentioned in this publication are subject to change without notice. This publication surpasses and replaces all information previously supplied. SYNC Power Corporation products are not authorized for use as critical components in life support devices or systems without express written approval of SYNC Power Corporation. ©The SYNC Power logo is a registered trademark of SYNC Power Corporation ©2004 SYNC Power Corporation – Printed in Taiwan – All Rights Reserved SYNC Power Corporation 7F-2, No.3-1, Park Street NanKang District (NKSP), Taipei, Taiwan, 115, R.O.C Phone: 886-2-2655-8178 Fax: 886-2-2655-8468 http://www.syncpower.com 2007/12/20 Ver.1 Page 9
SP9718
1. 物料型号 - 型号:SP9718 - 封装:SOP-8 (Power Pad)

2. 器件简介 - SP9718是一款低噪声脉宽调制(PWM)DC-DC降压转换器,适用于小型无线系统中的逻辑和发射器供电,例如手机、通信PDA和手持终端。该设备具有内部同步整流器,效率高,无需外部肖特基二极管。优异的噪声特性和固定频率操作提供了简便的后滤波。SP9718非常适合锂离子电池应用,也适用于+3V或+5V固定输入应用。

3. 引脚分配 - VIN(1号引脚):内部电路的电压供应。 - GND(2号引脚):内部参考电压分压器的地。 - SD(3号引脚):CMOS输入电平,用于关闭。 - VREF(4号引脚):设置输出电压。 - VFB(5号引脚):输出电压的反馈节点。 - PGND(6号引脚):输出功率晶体管的地。 - LX(7号引脚):内部功率MOSFET的漏极连接至电感。 - PVIN(8号引脚):输出功率晶体管的电压供应。

4. 参数特性 - 开关频率:1.2MHz - 输出电压可调范围:从VREF至VIN - 保证输出电流:1.5A - 效率:最高可达95% - 不需要肖特基二极管 - 外部软启动

5. 功能详解 - SP9718可以在四种模式下运行:强制PWM模式、关闭模式、输出电压调整模式和同步模式。 - 设备可以在2.0V至5.0V的输入范围内工作,输出电压可以从VREF调整至VIN。

6. 应用信息 - 手机、无绳电话、PDA和手持终端、CPU I/O电源、笔记本电脑芯片组电源、电池供电设备、ADSL等。

7. 封装信息 - SOP-8(Power Pad)封装,具体尺寸和英寸对应的最小值和最大值在文档中有详细描述。
SP9718 价格&库存

很抱歉,暂时无法提供与“SP9718”相匹配的价格&库存,您可以联系我们找货

免费人工找货