SMTR2425-11B40

Model SMTR2425-11B40 2.4-2.5 GHz 10W Bi-Directional Power Amplifier Stealth Microwave’s SMTR2425-11B40 is a solid state amplifier for use in 802.11b WLAN systems. This SSPA utilizes state of the art LDMOS FET transistors which allow for more efficient operation while still meeting EVM limits. Designed primarily for military use, the design can be applied for various ISM band applications as well. Features U Parameter Frequency Range 802.11b Compliant Power Out Transmit Path Specification 2400-2500 MHz + 40 dBm / 10W (min) Output power can be raised/lowered based on requirements Variable via AGC, can be fixed if required. +12 or + 28 Volts 2.5 – 3.0 A (10W output) • • • • • Automatic Gain Control circuitry provides consistent 10W output over a wide input range LED Tx/Rx mode status indicator +12V Power Supply (+28V version available ) Rugged Weatherproof Housing Various DC/RF connector options available Gain DC Input Voltage DC Input Current (On Transmit) Receive Path 23 dB (can be adjusted based on requirements) Receive Noise Figure 3 dB typical, 4 dB max.* Receive Gain DC Input Current (On Recieve) Approx 150 mA Mechanical Dimensions RF Connectors Operating Temperature * Contact sales if lower NF required 6 x 5 x .8 inches SMA Female 0ºC to +65ºC 1007 Whitehead Road Ext., Trenton, NJ 08638 Tel: (609) 538-8586 ♦ Fax: (609) 538-8587 Email: sales@stealthmicrowave.com ♦ Web site: www.stealthmicrowave.com Model SMTR2425-11B40 2.4-2.5 GHz 10W Bi-Directional Power Amplifier EVM Performance – 10W Average Power for 802.11b @11Mbps 1007 Whitehead Road Ext., Trenton, NJ 08638 Tel: (609) 538-8586 ♦ Fax: (609) 538-8587 Email: sales@stealthmicrowave.com ♦ Web site: www.stealthmicrowave.com Model SMTR2425-11B40 2.4-2.5 GHz 10W Bi-Directional Power Amplifier Rise/Fall Time Measurements 1007 Whitehead Road Ext., Trenton, NJ 08638 Tel: (609) 538-8586 ♦ Fax: (609) 538-8587 Email: sales@stealthmicrowave.com ♦ Web site: www.stealthmicrowave.com Model SMTR2425-11B40 2.4-2.5 GHz 10W Bi-Directional Power Amplifier DIMENSIONS IN INCHES Pin RF INPUT RF OUTPUT GND +12VDC Description Input Connector (SMA Female) Output Connector (SMA Female) Ground Turret DC Input Voltage Values Input range set per customer requirements – Typically +5 to +20dBm input +40dBm --+ 12 Volts @ 2.5 Amperes (typ.) Specifications subject to change without notice. 1007 Whitehead Road Ext., Trenton, NJ 08638 Tel: (609) 538-8586 ♦ Fax: (609) 538-8587 Email: sales@stealthmicrowave.com ♦ Web site: www.stealthmicrowave.com