940-SP-3088R

UNSHIELDED 30 SERIES PLUG ASSEMBLY INSTRUCTIONS Stewart Connector 11118 Susquehanna Trail South Glen Rock, PA 17327 STEWART CONNECTOR UNSHIELDED 30 SERIES PLUG ASSEMBLY INSTRUCTIONS Assembly steps 1 – 8: 1 2 Remove approximately 1 inch of Cable Jacket Untwist the pairs and Straighten the Wires 4 5 6 Insert Wires Along Plug Top, Maintaining Correct Alignment Inspect The Plug; Wires Should Be Visible from Plug Front Trim Wire Ends at 90, Approx. 9/16” From Jacket 7 Crimp Contacts and Strain Relief Page 1 of 1 3 Position Wires into Correct Configuration (568-B Shown) 8 Construction Complete MN300015-A2