2STD1360T4

2STD1360, 2STF1360, 2STN1360 Low voltage fast-switching NPN power transistors Datasheet − production data Features ■ Very low collector-emitter saturation voltage ■ High current gain characteristic ■ 4 4 Fast-switching speed 1 Emergency lighting ■ LED ■ Voltage regulation ■ Relay drive 3 3 2 1 SOT-223 Applications ■ 2 SOT-89 TAB 3 1 TO-252 (DPAK) Description Figure 1. Internal schematic diagram This device is an NPN transistor manufactured using new low voltage planar technology with double metal process. The result is a transistor which boasts exceptionally high gain performance coupled with very low saturation voltage. The complementary PNP types are the 2STD2360T4, the 2STF2360 and the 2STN2360. Table 1. Device summary Order codes Marking Packages Packaging 2STD1360T4 2STD1360 DPAK Tape and reel 2STF1360 1360 SOT-89 Tape and reel 2STN1360 N1360 SOT-223 Tape and reel August 2012 This is information on a product in full production. Doc ID 11783 Rev 3 1/16 www.st.com 16 Absolute maximum ratings 1 2STD1360, 2STF1360, 2STN1360 Absolute maximum ratings Table 2. Absolute maximum ratings Value Symbol Parameter 2STD1360 2STF1360 2STN1360 DPAK SOT-223 VCBO Collector-base voltage (IE = 0) 80 V VCEO Collector-emitter voltage (IB = 0) 60 V VEBO Emitter-base voltage 6 V Collector current 3 A Collector peak current (tP < 5 ms) 5 A Base current 0.2 A Base peak current (tP < 5 ms) 0.4 A IC ICM IB IBM (IC = 0) PTOT Total dissipation at Tamb = 25 °C Tstg Storage temperature TJ Table 3. Symbol RthJA(1) 15 1.4 1.6 W -65 to 150 °C 150 °C Max. operating junction temperature Thermal data Parameter Thermal resistance junction-ambient ___ _Max 1. Device mounted on a PCB area of 1 cm2 2/16 SOT-89 Unit Doc ID 11783 Rev 3 DPAK SOT-89 SOT-223 Unit 8.3 89 78 °C/W 2STD1360, 2STF1360, 2STN1360 2 Electrical characteristics Electrical characteristics TCASE = 25°C; unless otherwise specified. Table 4. Symbol Electrical characteristics Parameter Test conditions Min. Typ. Max. Unit ICBO Collector cut-off current (IE = 0) VCB = 80 V 100 nA IEBO Emitter cut-off current (IC = 0) VEB = 6 V 100 nA Base-emitter on voltage VCE = 2 V IC = 100 mA 650 730 mV VCE(sat)(1) Collector-emitter saturation voltage IC = 2 A IC = 3 A _ IB = 100 mA IB = 150 mA 130 180 300 500 mV mV VBE(sat) (1) Base-emitter saturation voltage IC = 2 A _ IB = 100 mA 0.9 1.2 V DC current gain IC = 100 mA_ VCE = 2 V IC = 1 A _ VCE = 2 V td tr ts tf Resistive load Delay time Rise time Storage time Fall time IC = 3 A VCC = 10 V IB(on) = - IB(off) = 300 mA VBE(off) = - 5 V fT Transition frequency IC = 0.1 A __ VCE = 10 V VBE(on) hFE(1) 630 80 160 400 17 20 ns 81 100 ns 620 720 ns 54 65 ns 130 MHz 1. Pulse test: pulse duration ≤300 µs, duty cycle ≤2 % Doc ID 11783 Rev 3 3/16 Electrical characteristics 2STD1360, 2STF1360, 2STN1360 2.1 Typical characteristics (curves) Figure 2. DC current gain (VCE = 5 V) Figure 4. Collector emitter saturation voltage Figure 5. Base emitter saturation voltage Figure 6. Resistive load switching on Resistive load switching off 4/16 Figure 3. Figure 7. Doc ID 11783 Rev 3 DC current gain (VCE = 2 V) 2STD1360, 2STF1360, 2STN1360 Figure 8. Electrical characteristics Capacitance C1000 (pF) CEB f = 1 MHz 100 CCB 10 0.1 2.2 1 10 VR100 (V) Test circuits Figure 9. Resistive load switching 1. Fast electronic switch 2. Non-inductive resistor Doc ID 11783 Rev 3 5/16 Package mechanical data 3 2STD1360, 2STF1360, 2STN1360 Package mechanical data In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK® is an ST trademark. 6/16 Doc ID 11783 Rev 3 2STD1360, 2STF1360, 2STN1360 Table 5. Package mechanical data DPAK (TO-252) mechanical data mm Dim. Min. Typ. Max. A 2.20 2.40 A1 0.90 1.10 A2 0.03 0.23 b 0.64 0.90 b4 5.20 5.40 c 0.45 0.60 c2 0.48 0.60 D 6.00 6.20 D1 E 5.10 6.40 6.60 E1 4.70 e 2.28 e1 4.40 4.60 H 9.35 10.10 L 1 L1 2.80 L2 0.80 L4 0.60 1 R V2 0.20 0° 8° Doc ID 11783 Rev 3 7/16 Package mechanical data 2STD1360, 2STF1360, 2STN1360 Figure 10. DPAK (TO-252) drawing 0068772_I Figure 11. DPAK footprint(a) 6.7 1.8 3 1.6 2.3 6.7 2.3 1.6 a. All dimensions are in millimeters 8/16 Doc ID 11783 Rev 3 AM08850v1 2STD1360, 2STF1360, 2STN1360 Table 6. Package mechanical data DPAK (TO-252) tape and reel mechanical data Tape Reel mm mm Dim. Dim. Min. Max. A0 6.8 7 A B0 10.4 10.6 B 1.5 12.1 C 12.8 1.6 D 20.2 G 16.4 50 B1 Min. Max. 330 13.2 D 1.5 D1 1.5 E 1.65 1.85 N F 7.4 7.6 T K0 2.55 2.75 P0 3.9 4.1 Base qty. 2500 P1 7.9 8.1 Bulk qty. 2500 P2 1.9 2.1 R 40 T 0.25 0.35 W 15.7 16.3 Doc ID 11783 Rev 3 18.4 22.4 9/16 Package mechanical data 2STD1360, 2STF1360, 2STN1360 Figure 12. Tape for DPAK (TO-252) 10 pitches cumulative tolerance on tape +/- 0.2 mm T P0 Top cover tape P2 D E F B1 W K0 B0 For machine ref. only including draft and radii concentric around B0 A0 P1 D1 User direction of feed R Bending radius User direction of feed AM08852v1 Figure 13. Reel for DPAK (TO-252) T REEL DIMENSIONS 40mm min. Access hole At sl ot location B D C N A Full radius Tape slot in core for tape start 25 mm min. width G measured at hub AM08851v2 10/16 Doc ID 11783 Rev 3 2STD1360, 2STF1360, 2STN1360 Table 7. Package mechanical data SOT-89 mechanical data mm Dim. Min. Typ. Max. A 1.40 1.60 B 0.44 0.56 B1 0.36 0.48 C 0.35 0.44 C1 0.35 0.44 D 4.40 4.60 D1 1.62 1.83 D3 0.90 E 2.29 2.60 e 1.42 1.57 e1 2.92 3.07 H 3.94 4.25 H1 2.70 3.10 K 1° 8° L 0.89 1.20 R 0.25 β 90° Doc ID 11783 Rev 3 11/16 Package mechanical data 2STD1360, 2STF1360, 2STN1360 Figure 14. SOT-89 drawings ?2%6?% 12/16 Doc ID 11783 Rev 3 2STD1360, 2STF1360, 2STN1360 Package mechanical data Figure 15. SOT-89 recommended footprint &OOTPRINT Doc ID 11783 Rev 3 13/16 Package mechanical data Table 8. 2STD1360, 2STF1360, 2STN1360 SOT-223 mechanical data mm Dim. Min. Typ. A Max. 1.80 A1 0.02 0.1 B 0.60 0.70 0.85 B1 2.90 3.00 3.15 c 0.24 0.26 0.35 D 6.30 6.50 6.70 e 2.30 e1 4.60 E 3.30 3.50 3.70 H 6.70 7.00 7.30 V 10° Figure 16. SOT-223 mechanical data drawing 0046067_M 14/16 Doc ID 11783 Rev 3 2STD1360, 2STF1360, 2STN1360 4 Revision history Revision history Table 9. Document revision history Date Revision Changes 21-Nov-2005 1 Initial release 09-Oct-2009 2 Added 2STD1360T4 in TO-252 (DPAK) package 13-Aug-2012 3 Modified: marking for DPAK in Table 1 Doc ID 11783 Rev 3 15/16 2STD1360, 2STF1360, 2STN1360 Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY TWO AUTHORIZED ST REPRESENTATIVES, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2012 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 16/16 Doc ID 11783 Rev 3