74VHC14YMTR

74VHC14 Hex Schmitt inverter Datasheet − production data Features ■ High speed: tPD = 5.5 ns (typ.) at VCC = 5 V ■ Low power dissipation – ICC = 2 μA (max.) at TA = 25 °C ■ Typical hysteresis: Vh = 1 V at VCC = 4.5 V ■ Power-down protection on inputs – Symmetrical output impedance |IOH| = IOL = 8 mA (min.) TSSOP14 Description ■ Balanced propagation delay: tPLH ≅ tPHL ■ Operating voltage range – VCC (opr.) = 2 V to 5.5 V ■ Pin and function compatible with 74 series 14 ■ Improved latch-up immunity ■ Low noise – VOLP = 0.8 V (max.) ■ ESD performance – HBM: 2000 V – MM: 200 V – CDM: 1000 V Applications ■ Automotive ■ Industrial ■ Computer ■ Consumer Table 1. SO-14 The 74VHC14 device is an advanced high-speed CMOS hex Schmitt inverter manufactured with sub-micron silicon gate and double-layer metal wiring C2MOS technology. The internal circuit is composed of 3 stages including a buffer output, which provides high noise immunity and stable output. Power-down protection is provided on all inputs and 0 to 7 V can be accepted on inputs regardless of the supply voltage. This device can be used to interface from 5 V to 3 V. Pin configuration and function are the same as those of the 74VHC04 device but the 74VHC14 device has hysteresis. This along with its Schmitt trigger function allows the device to be used on line receivers with slow rise/fall input signals. All inputs and outputs are equipped with protection circuits against static discharge, giving them 2 kV ESD immunity and transient excess voltage. Device summary Order code Temperature range Package Packaging Marking 74VHC14TTR -55/+125 °C TSSOP14 Tape and reel VHC14 74VHC14YTTR(1) -40/+125 °C TSSOP14 (automotive grade) Tape and reel VHC14Y 74VHC14MTR -55/+125 °C SO-14 Tape and reel 74VHC14 74VHC14YMTR(1) -40/+125 °C SO-14 (automotive grade) Tape and reel 74VHC14Y 1. Qualification and characterization according to AEC Q100 and Q003 or equivalent, advanced screening according to AEC Q001 and Q002 or equivalent. October 2012 This is information on a product in full production. Doc ID 5741 Rev 9 1/16 www.st.com 16 Contents 74VHC14 Contents 1 Logic symbols and I/O equivalent circuit . . . . . . . . . . . . . . . . . . . . . . . . 3 2 Pin settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 3 2.1 Pin connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2.2 Pin description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2.3 Truth table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Maximum ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Recommended operating conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 4 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 5 Test circuit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 6 Waveform . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 7 Package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 8 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 2/16 Doc ID 5741 Rev 9 74VHC14 1 Logic symbols and I/O equivalent circuit Logic symbols and I/O equivalent circuit Figure 1. IEC logic symbols Figure 2. Input and output equivalent circuit Doc ID 5741 Rev 9 3/16 Pin settings 74VHC14 2 Pin settings 2.1 Pin connections Figure 3. 2.2 Pin connections (top through view) Pin description Table 2. 2.3 Pin number Symbol 1, 3, 5, 9, 11, 13 1A to 6A Data inputs 2, 4, 6, 8, 10, 12 1Y to 6Y Data outputs 7 GND Ground (0 V) 14 VCC Positive supply voltage Name and function Truth table Table 3. 4/16 Pin description Truth table Input Output A Y L H H L Doc ID 5741 Rev 9 74VHC14 3 Maximum ratings Maximum ratings Stressing the device above the rating listed in Table 4: Absolute maximum ratings may cause permanent damage to the device. These are stress ratings only and operation of the device at these or any other conditions above those indicated in Table 5: Recommended operating conditions of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. Table 4. Absolute maximum ratings Symbol Parameter Value Unit Supply voltage -0.5 to +7.0 V VI DC input voltage -0.5 to +7.0 V VO DC output voltage -0.5 to VCC + 0.5 V IIK DC input diode current - 20 mA IOK DC output diode current ± 20 mA IO DC output current ± 25 mA ICC DC supply current per supply pin ± 50 mA IGND DC ground current per supply pin ± 50 mA Tstg Storage temperature -65 to +150 °C 300 °C Value Unit Supply voltage 2 to 5.5 V VI Input voltage 0 to 5.5 V VO Output voltage 0 to VCC V TSSOP14, SO-14 -55 to +125 °C Top Operating temperature TSSOP14 (automotive grade) -40 to +125 °C VCC TL Lead temperature (10 sec.) Recommended operating conditions Table 5. Recommended operating conditions Symbol VCC Parameter Doc ID 5741 Rev 9 5/16 Electrical characteristics 74VHC14 4 Electrical characteristics Table 6. DC specifications Test condition Symbol Vt+ Vt- Vh VOH VOL II ICC 6/16 Parameter High level threshold voltage Low level threshold voltage Hysteresis voltage Value TA = 25°C VCC (V) Min. Typ. -40 to 85 °C -55 to 125 °C Unit Max. Min. Max. Min. Max. 3.0 2.2 2.2 2.2 4.5 3.15 3.15 3.15 5.5 3.85 3.85 3.85 3.0 0.9 0.9 0.9 4.5 1.35 1.35 1.35 5.5 1.65 1.65 1.65 3.0 0.3 1.2 0.3 1.2 0.3 1.2 4.5 0.4 1.4 0.4 1.4 0.4 1.4 5.5 0.5 1.6 0.5 1.6 0.5 1.6 V V V 2.0 IO = -50 μA 1.9 2.0 1.9 1.9 3.0 IO = -50 μA 2.9 3.0 2.9 2.9 4.5 IO = -50 μA 4.4 4.5 4.4 4.4 3.0 IO = -4 mA 2.58 2.48 2.4 4.5 IO = -8 mA 3.94 3.8 3.7 2.0 IO = 50 μA 0.0 0.1 0.1 0.1 3.0 IO = 50 μA 0.0 0.1 0.1 0.1 4.5 IO = 50 μA 0.0 0.1 0.1 0.1 3.0 IO = 4 mA 0.36 0.44 0.55 4.5 IO = 8 mA 0.36 0.44 0.55 Input leakage current 0 to 5.5 VI = 5.5 V or GND ± 0.1 ±1 ±1 μA Quiescent supply current 5.5 VI = V CC or GND 2 20 20 μA High level output voltage Low level output voltage Doc ID 5741 Rev 9 V V 74VHC14 Table 7. Electrical characteristics AC electrical characteristics (input tr = tf = 3 ns) Test condition Symbol tPLH tPHL Parameter Propagation delay time VCC (V) CL (pF) 3.3(1) Value TA = 25 °C Min. -40 to 85 °C -55 to 125 °C Typ. Max. Min. Max. Min. Max. 15 8.3 12.8 1.0 15.0 1.0 15.0 3.3(1) 50 10.8 16.3 1.0 18.5 1.0 18.5 5.0(2) 15 5.5 8.6 1.0 10.0 1.0 10.0 5.0(2) 50 7.0 10.6 1.0 12.0 1.0 12.0 Unit ns 1. Voltage range is 3.3 V ± 0.3 V. 2. Voltage range is 5.0 V ± 0.5 V. Table 8. Capacitive characteristics Test condition Symbol Parameter Value TA = 25 °C Min. Typ. Max. 10 CIN Input capacitance 6 CPD Power dissipation capacitance(1) 14 -40 to 85 °C -55 to 125°C Min. Min. Max. 10 Unit Max. 10 pF pF 1. CPD is defined as the value of the IC’s internal equivalent capacitance which is calculated from the operating current consumption without load. (Refer to Section 5: Test circuit). Average operating current can be obtained by the following equation. ICC(opr) = CPD x VCC x fIN + ICC/6 (per gate). Table 9. Dynamic switching characteristics Test condition Symbol VOLP Parameter TA = 25 °C VCC (V) 5.0 VOLV Dynamic low voltage quiet output(1), (2) VIHD Dynamic high voltage input (1), (3) 5.0 VILD Dynamic low voltage input (1), (3) 5.0 Value Min. Typ. Max. 0.3 0.8 -40 to 85 °C -55 to 125 °C Min. Min. Max. Unit Max. V -0.8 CL = 50 pF -0.3 3.5 V 1.5 V 1. Worst case package. 2. Max number of outputs defined as (n). Data inputs are driven 0 V to 5.0 V, (n-1) outputs switching and one output at GND. 3. Max number of data inputs (n) switching. (n-1) switching 0 V to 5.0 V. Inputs under test switching: 5.0 V to threshold (VILD ), 0 V to threshold (VIHD), f = 1 MHz. Doc ID 5741 Rev 9 7/16 Test circuit 5 74VHC14 Test circuit Figure 4. Note: Test circuit CL = 15/50 pF or equivalent (includes jig and probe capacitance) RT = ZOUT of pulse generator (typically 50 Ω ). 8/16 Doc ID 5741 Rev 9 74VHC14 6 Waveform Waveform Figure 5. Waveform - propagation delay (f = 1MHz; 50% duty cycle) Doc ID 5741 Rev 9 9/16 Package information 7 74VHC14 Package information In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK specifications, grade definitions and product status are available at: www.st.com. ECOPACK is an ST trademark. 10/16 Doc ID 5741 Rev 9 74VHC14 Package information Figure 6. SO-14 package outline Table 10. SO-14 package mechanical data Dimensions Symbol mm Min. Typ. inch Max. Min. Typ. Max. A 1.35 1.75 0.053 0.069 A1 0.1 0.25 0.004 0.010 A2 1.10 1.65 0.043 0.065 B 0.33 0.51 0.013 0.020 C 0.19 0.25 0.007 0.010 D 8.55 8.75 0.337 0.344 E 3.8 4.0 0.150 0.157 e 1.27 0.050 H 5.8 6.2 0.228 0.244 h 0.25 0.50 0.010 0.020 L 0.4 1.27 0.016 0.050 k 0° 8° 0° 8° ddd 0.100 Doc ID 5741 Rev 9 0.004 11/16 Package information 74VHC14 Figure 7. TSSOP14 package outline Table 11. TSSOP14 package mechanical data Dimensions Symbol mm Min. Typ. A Max. Min. Typ. 1.2 A1 0.05 A2 0.8 b Max. 0.047 0.15 0.002 0.004 0.006 1.05 0.031 0.039 0.041 0.19 0.30 0.007 0.012 c 0.09 0.20 0.004 0.0089 D 4.9 5 5.1 0.193 0.197 0.201 E 6.2 6.4 6.6 0.244 0.252 0.260 E1 4.3 4.4 4.48 0.169 0.173 0.176 e 12/16 inch 1 0.65 BSC K 0° L 0.45 0.60 0.0256 BSC 8° 0° 0.75 0.018 Doc ID 5741 Rev 9 8° 0.024 0.030 74VHC14 Package information Figure 8. Tape and reel SO-14 outline 1. Drawing is not in scale. Table 12. Tape and reel SO-14 mechanical data Dimensions Symbol mm Min. A Typ. inch Max. Min. 330 Max. 12.992 C 12.8 D 20.2 0.795 N 60 2.362 T 13.2 Typ. 0.504 22.4 0.519 0.882 Ao 6.4 6.6 0.252 0.260 Bo 9 9.2 0.354 0.362 Ko 2.1 2.3 0.082 0.090 Po 3.9 4.1 0.153 0.161 P 7.9 8.1 0.311 0.319 Doc ID 5741 Rev 9 13/16 Package information Figure 9. 74VHC14 Tape and reel TSSOP14 outline 1. Drawing is not in scale. Table 13. Tape and reel TSSOP14 mechanical data Dimensions Symbol mm Min. A Max. Min. 330 13.2 Typ. Max. 12.992 C 12.8 D 20.2 0.795 N 60 2.362 T 14/16 Typ. inch 0.504 22.4 0.519 0.882 Ao 6.7 6.9 0.264 0.272 Bo 5.3 5.5 0.209 0.217 Ko 1.6 1.8 0.063 0.071 Po 3.9 4.1 0.153 0.161 P 7.9 8.1 0.311 0.319 Doc ID 5741 Rev 9 74VHC14 8 Revision history Revision history Table 14. Document revision history Date Revision 12-Nov-2004 6 Ordering codes revision - pag. 1 02-May-2007 7 Document reformatted, updated Table 6 on page 6 8 Added Applications on page 1 Updated Table 1: Device summary on page 1 Updated Top in Table 5: Recommended operating conditions Updated ECOPACK® text in Section 7: Package information Minor textual updates 9 Added ESD performance into Features. Added 74VHC14YMTR device and “Marking” to Table 1, updated note 1 below Table 1. Updated Section 3: Maximum ratings (added cross-references) Reformatted Section 7: Package information. Minor corrections throughout document. 15-Jun-2012 03-Oct-2012 Changes Doc ID 5741 Rev 9 15/16 74VHC14 Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY TWO AUTHORIZED ST REPRESENTATIVES, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2012 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 16/16 Doc ID 5741 Rev 9