AC7MDT10-D20/S20

AC7MDT10-D20/S20 DIP20/SO20 Connection Kit for ST7MDT10-EMU3 DATA BRIEF The DIP20/SO20 Connection Kit (AC7MDT10D20/S20) provides the hardware you need to connect your ST7MDT10-EMU3 emulator to your application when debugging applications for ST7 microcontrollers in DIP20 and SO20 packages. Figure 2. DIP20 adapter, DIP20 device adapter DIP20 adapter (DB482A) Connection Kit Contents ■ DIP20 adapter (DB482A) – Allows the connection of your ST7MDT10-EMU3 emulator to your application board in place of your ST7. ■ DIP20-DIP20 device adapter (DB535) – Adapts the pin out of the DIP20 adapter to the DIP20 footprint of the ST7 on your application board. ■ DIP20-SO20 device adapter (DB093) – Adapts the DIP20 adapter to SO20 footprint of the ST7 on your application board. For more information... ■ ST7-EMU3 User Manual – Information common to all EMU3 series emulators ■ ST7MDT10-EMU3 Probe User Guide – Information specific to ST7MDT10-EMU3 Figure 1. DIP20 device adapter (DB535) Figure 3. DIP20 application board connection 2. Plug the DIP20 adapter into the W1 connector on the target emulation board of your ST7MDT10-EM3. 3. Align pin 1 indicators, then insert the pins of the DIP20 adapter into the DIP20-DIP20 device adapter. Pin 1 Indicators 4. Align pin 1 indicators, then insert the pins of the DIP20DIP20 device adapter into the socket on the application board. Application board DIP20 adapter DIP20 adapter (DB586) 1. Solder socket on to the application board. Note: The pinout on the DIP20 adapter is askew by 90° from the microcontroller. You use the DIP20 to DIP20 device adapter between the flex adapter and the socket on your application board when emulating MCUs in DIP20 package. November 2005 Rev 1 1/3 www.st.com 3 AC7MDT10-D20/S20 Figure 4. DIP20 adapter, SO20 device adapter and application board connection DIP20 adapter (DB482A) 2. Plug the DIP20 adapter into the W1 connector on the target emulation board of your ST7MDT10-EM3. DIP20-SO20 device adapter (DB093) Pin 1 Indicators 1. Solder the connection pins to your application board in place of your MCU. When soldering, insert the connection pins into the device adapter, which serves as a support to ensure correct alignment. 3. Align pin 1 indicators, then insert the pins of the DIP20 adapter into the DIP20-SO20 device adapter. Application board Revision history Date Revision 14-November-2005 1 2/3 Changes Initial release. AC7MDT10-D20/S20 Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners © 2005 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 3/3