ADB18PS

® ADB18PS AUTOPROTECTED DIODE BRIDGE Application Specific Discretes A.S.D.TM MAIN APPLICATIONS Any electronic equipment needing a diode bridge and protection against transient overvoltage : Caller Id Handset TAB DESCRIPTION The ADB18PS combines a diode bridge and a clamping protection function. Integrated monolithically within a SMD package, this device allows space saving and greater reliability. It provides both rectification and protection for low power equipment directly supplied by mains. 1 2 3 45 PPAK-5L PIN-OUT CONFIGURATION 2 FEATURES Peak pulse power dissipation 100 W (8/20 µs) Stand-off voltage : 18 V Maximum DC current : 0.5 A Clamping voltage : VCL < 50 V (8/20 µs) 5 4 1 BENEFITS Protection combined with rectification High reliability conferedby monolithic construction Space saving Cost effective solution Pin 1 2 3 4 5 TAB Description DC output AC input Not accessible AC input DC output Not to be connected February 1998 - Ed: 2 1/3 ADB18PS APPLICATION CIRCUIT : Caller Id interface ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) Symbol PPP P VRRM IPP IF IFSM Tstg Tj Parameter Peak pulse power dissipation (one pulse) Power dissipation Repetitive peak reverse voltage Peak pulse reverse current (one pulse) Forward current for one diode Non repetitive surge peak forward current Storage temperature range Maximum junction temperature tp = 8.3 ms tp= 10 ms 8 / 20 µs Test conditions 8 / 20 µs Tcase = 70 °C Value 100 20 18 2 0.5 8 7.5 -40 to 150 150 Unit W W V A A A °C °C ELECTRICAL CHARACTERISTICS (Tamb = 25°C). Symbol VCL IRM VF C Parameter Clamping voltage IPP = 2 A Leakage current Forward voltage for one diode Capacitance Test conditions 8 / 20 µs VRM = 18 V IF = 500 mA VR =0 V, F=1 MHz 50 Typ Max 50 2 1.4 Unit V µA V pF THERMAL RESISTANCES Symbol Rth(j-a) Rth(j-a) Rth(j-c) 2/3 ® Parameter Junction to ambient on FR4 (0.5 cm ) Junction to ambient on IMS (17 cm ) Junction to case 2 2 Value 80 30 4 Unit °C/W °C/W °C/W ADB18PS ORDER CODE ADB Reverse voltage PPAK-5L MARKING Package PPAK-5L Type ADB18PS Marking ADB18 18 PS RL PACKAGING : RL = tape & reel (base qty = 2500 pcs) = tube (base qty = 75 pcs) PACKAGE MECHANICAL DATA PPAK-5L DIMENSIONS REF. A A1 A2 B B2 C C2 D E G G1 H L2 L4 R V2 Millimeters Min. Typ. Max 2.20 0.90 0.03 0.4 5.20 0.45 0.48 6.00 6.40 4.9 2.38 9.35 2.40 1.10 0.23 0.90 5.40 0.60 0.60 6.20 6.60 5.25 2.7 10.10 0.80 1.00 0.60 1.00 0.2 0° 8° Min. 0.0866 0.0354 0.0001 0.0157 0.2047 0.0177 0.0188 0.2362 0.2519 0.1929 0.0937 0.369 Inches Typ. Max. 0.0945 0.0433 0.0009 0.0236 0.2126 0.0236 0.0236 0.2441 0.2598 0.2067 0.1063 0.3977 0.0314 0.0393 0.0236 0.0393 0.0078 0° 8° Information furnished is believed to be accurate and reliable. However, SGS-THOMSON Microelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of SGS-THOMSON Microelectronics. Specifications mentioned in this publication are subject to change withoutnotice. This publication supersedes and replaces all information previously supplied. SGS-THOMSON Microelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of SGS-THOMSON Microelectronics. © 1998 SGS-THOMSON Microelectronics - Printed in Italy - All rights reserved. SGS-THOMSON Microelectronics GROUP OF COMPANIES Australia - Brazil - Canada - China - France - Germany - Italy - Japan - Korea - Malaysia - Malta - Morocco The Netherlands - Singapore - Spain - Sweden - Switzerland - Taiwan - Thailand - United Kingdom - U.S.A. 3/3 ®