B-F446E-96B01A

B-F446E-96B01A 96Boards Mezzanine board with STM32F446 MCU and sensors Data brief Features  Based on STM32F446 MCU ARM® Cortex® -M4 180MHz in LQFP100 package  Compliant with the 96Boards CE standard  Two types of extension resources: – 96Boards high/low-speed connectivity – Arduino™ Uno Revision 3 and Grove™ connectivity  ARM® mbed™ -enabled (see http://mbed.org) planned for the first quarter of 2016  Integrated MEMS sensors: – 9-axis accelerometer/gyroscope/magnetometer – pressure, microphone  On-board ST-LINK/V2-1 debugger/programmer  USB re-enumeration capability: – Virtual Com port – Mass storage – Debug port  Supported by wide choice of Integrated Development Environments (IDEs) including IAR™, Keil®, GCC-based IDEs, ARM® mbed™ online December 2015 1. Picture not contractual Description The 96Boards Mezzanine board with STM32F446 MCU (B-F446E-96B01A) enables users to prototype systems that are aware of their environment, thanks to the embedded sensors for movement, pressure and sound. It can directly be plugged on top of the 96Boards CE cards and supports multiple expansion possibilities through the Arduino™ Uno Revision 3 or the Grove™ connectivity. The integrated ST-LINK/V2-1 debugger facilitates software development, dragand-drop programming and provides a direct access to the ARM® mbed™ on-line resources. DocID028765 Rev 1 For further information contact your local STMicroelectronics sales office. 1/3 www.st.com Revision history 1 B-F446E-96B01A Revision history Table 1. Document revision history 2/3 Date Revision 21-Dec-2015 1 Changes Initial release. DocID028765 Rev 1 B-F446E-96B01A IMPORTANT NOTICE – PLEASE READ CAREFULLY STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgement. Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of Purchasers’ products. No license, express or implied, to any intellectual property right is granted by ST herein. Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product. ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners. Information in this document supersedes and replaces information previously supplied in any prior versions of this document. © 2015 STMicroelectronics – All rights reserved DocID028765 Rev 1 3/3 3