BCP56-16

BCP56-16 Low power NPN Transistor General features ■ Silicon epitaxial planar NPN medium voltage transistor SOT-223 plastic package for surface mounting circuits Available in tape & reel packing In compliance with the 2002/93/EC European Directive The PNP complementary type is BCP53-16 2 2 ■ 3 ■ ■ 1 SOT-223 ■ Applications ■ ■ ■ Medium voltage load switch transistor Output stage for audio amplifiers circuits Automotive post-voltage regulation Internal schematic diagram Order codes Part Number BCP56-16 Marking BCP5616 Package SOT-223 Packing Tape & reel June 2006 Rev 3 1/9 www.st.com 9 BCP56-16 Contents 1 2 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2.1 Electrical characteristics (curves) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 3 4 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 2/9 BCP56-16 Electrical ratings 1 Electrical ratings Table 1. Symbol VCBO VCEO VEBO IC ICM IB IBM Ptot Tstg TJ Absolute maximum rating Parameter Collector-base voltage (IE = 0) Collector-emitter voltage (IB = 0) Emitter-base voltage (IC = 0) Collector current Collector peak current (tP < 5ms) Base current Base peak current (tP < 5ms) Total dissipation at T amb = 25°C Storage temperature Max. operating junction temperature Value 100 80 5 1 1.5 0.1 0.2 1.6 -65 to 150 150 Unit V V V A A A A W °C °C Table 2. Symbol Rthj-amb 1. Thermal data Parameter Thermal resistance junction-ambient (1)__max Value 78 Unit °C/W Device mounted on PCB area of 1 cm 2. 3/9 Electrical characteristics BCP56-16 2 Electrical characteristics (Tcase = 25°C unless otherwise specified) Table 3. Symbol ICBO Electrical characteristics Parameter Collector cut-off current (IE =0) Test Conditions VCB = 30V VCB = 30V; IC = 20mA Tj = 125°C 80 Min. Typ. Max. 100 10 Unit nA µA V Collector-emitter V(BR)CEO (2) breakdown voltage (IB =0) V(BR)CBO Collector-base breakdown voltage (IE =0) Emitter-base breakdown voltage (IC =0) Collector-emitter saturation voltage Base-emitter on voltage IC = 100µA 100 V V(BR)EBO VCE(sat) (2) VBE(on) (2) (2) IE = 10µA IC = 500mA IC = 500mA IC = 5mA IB = 50mA V CE = 2V V CE = 2V V CE = 2V V CE = 2V 5 0.5 1 40 100 25 250 V V V hFE DC current gain IC = 150mA IC = 500mA Note (2) Pulsed duration = 300 µs, duty cycle ≤1.5% 4/9 BCP56-16 Electrical characteristics 2.1 Electrical characteristics (curves) Figure 1. DC current gain Figure 2. Collector-emitter saturation voltage Figure 3. Base-emitter saturation voltage 5/9 Package mechanical data BCP56-16 3 Package mechanical data In order to meet environmental requirements, ST offers these devices in ECOPACK® packages. These packages have a Lead-free second level interconnect. The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com 6/9 BCP56-16 Package mechanical data SOT-223 MECHANICAL DATA mm MIN. A B B1 c D e e1 E H V A1 0.02 3.30 6.70 0.60 2.90 0.24 6.30 0.70 3.00 0.26 6.50 2.30 4.60 3.50 7.00 3.70 7.30 10o 0.130 0.264 TYP. MAX. 1.80 0.80 3.10 0.32 6.70 0.024 0.114 0.009 0.248 0.027 0.118 0.010 0.256 0.090 0.181 0.138 0.276 0.146 0.287 10o MIN. inch TYP. MAX. 0.071 0.031 0.122 0.013 0.264 DIM. P008B 7/9 Revision history BCP56-16 4 Revision history Table 4. Date 02-Sep-2004 26-May-2006 14-Jun-2006 Revision history Revision 1 2 3 Initial release. New template Three curves has been added on page 5. Changes 8/9 BCP56-16 Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZE REPRESENTATIVE OF ST, ST PRODUCTS ARE NOT DESIGNED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS, WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2006 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 9/9