BUL98

BUL98 High voltage fast-switching NPN power transistor General features ■ ■ ■ ■ ■ ■ High voltage capability Minimum lot-to-lot spread for reliable operation Low base drive requirements Very high switching speed Fully characterized at 125 °C In compliance with the 2002/93/EC European Directive 1 2 3 TO-220 Applications ■ ■ Electronic transformers for halogen lamps Switch mode power supply Internal schematic diagram Description The device is manufactured using high voltage Multi-Epitaxial Planar technology for costeffective high performance. It uses a Hollow Emitter structure to enhance switching speeds. The device is designed for use in lighting applications and low cost switch-mode power supplies. Order code Part Number BUL98 Marking BUL98 Package TO-220 Packing Tube November 2006 Rev 2 1/10 www.st.com 10 BUL98 Contents 1 2 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2.1 2.2 Electrical characteristics (curves) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Test circuits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 3 4 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 2/10 BUL98 Electrical ratings 1 Electrical ratings Table 1. Symbol VCES VCEO VEBO IC ICM IB IBM Ptot Tstg TJ Absolute maximum ratings Parameter Collector-emitter voltage (V BE =0) Collector-emitter voltage (IB =0) Emitter-base voltage (IC =0) Collector current Collector peak current (tP < 5ms) Base current Base peak current (tP < 5ms) Total dissipation at T c ≤ 25°C Storage temperature Max. operating junction temperature Value 800 450 9 12 25 6 12 110 -65 to 150 150 Unit V V V A A A A W °C °C Table 2. Symbol Rthj-case Thermal data Parameter Thermal resistance junction-case __max Value 1.14 Unit °C/W 3/10 Electrical characteristics BUL98 2 Electrical characteristics (Tcase = 25°C unless otherwise specified) Table 3. Symbol ICES ICEO Electrical characteristics Parameter Collector cut-off current (VBE =0) Collector-emitter current (IB =0) Test Conditions VCE = 800V VCE = 800V VCE = 450V L = 25mH 450 9 _ _ IB =1A _ _ IB =1.8A __ _ IB =2.4A _ _ IB =1A _ _ IB =1.8A __ _ IB =2.4A V CE =5V V CE =5V IC =9A IB1 =1.8A RBB(off) =0Ω IC =9A IB1 =1.8A RBB(off) =0Ω (see figure 8) 1.5 80 µs ns 1.1 55 1.8 100 µs ns 10 15 35 0.15 0.3 0.5 0.95 1 1.1 0.5 0.8 1.5 1.2 1.3 1.4 Tj = 125°C Min. Typ. Max. 100 500 100 Unit µA µA µA V V V V V V V V Collector-emitter VCEO(sus)(1) sustaining voltage (I = 0) IC =10mA B VEBO VCE(sat) (1) Emitter-base voltage (IC = 0) Collector-emitter saturation voltage IE =10mA IC =5A IC =9A IC =12A IC =5A IC =9A IC =12A IC =10mA IC =5A VCL =350V VBE(off) =-5V L =200µH (see figure 8) VCL =350V VBE(off) =-5V L =200µH Tj = 100°C VBE(sat) (1) Base-emitter saturation voltage hFE (1) DC current gain ts tf Inductive load Storage time Fall time ts tf Inductive load Storage time Fall time Note (1) Pulsed duration = 300 µs, duty cycle ≤1.5% 4/10 BUL98 Electrical characteristics 2.1 Electrical characteristics (curves) Figure 1. Safe operating area Figure 2. Derating curve Figure 3. Collector-emitter saturation voltage Figure 4. Base-emitter saturation voltage Figure 5. DC current gain Figure 6. DC current gain 5/10 Electrical characteristics Figure 7. Reverse biased safe operating area BUL98 2.2 Test circuits Figure 8. Inductive load switching test circuit 1) Fast electronic switch 2) Non-inductive resistor 3) Fast recovery rectifier 6/10 BUL98 Package mechanical data 3 Package mechanical data In order to meet environmental requirements, ST offers these devices in ECOPACK® packages. These packages have a Lead-free second level interconnect. The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com 7/10 Package mechanical data BUL98 TO-220 MECHANICAL DATA DIM. A b b1 c D E e e1 F H1 J1 L L1 L20 L30 mm. MIN. 4.40 0.61 1.15 0.49 15.25 10 2.40 4.95 1.23 6.20 2.40 13 3.50 16.40 28.90 3.75 2.65 3.85 2.95 0.147 0.104 TYP MAX. 4.60 0.88 1.70 0.70 15.75 10.40 2.70 5.15 1.32 6.60 2.72 14 3.93 MIN. 0.173 0.024 0.045 0.019 0.60 0.393 0.094 0.194 0.048 0.244 0.094 0.511 0.137 0.645 1.137 0.151 0.116 inch TYP. MAX. 0.181 0.034 0.066 0.027 0.620 0.409 0.106 0.202 0.052 0.256 0.107 0.551 0.154 øP Q 8/10 BUL98 Revision history 4 Revision history Table 4. Date 30-Jun-2005 07-Nov-2006 Revision history Revision 1 2 First release. The document has been reformatted Changes 9/10 BUL98 Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZE REPRESENTATIVE OF ST, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS, WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS “AUTOMOTIVE GRADE” MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2006 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 10/10