BUV298V

BUV298V NPN transistor power module General features ■ ■ ■ ■ ■ ■ ■ NPN Transistor High current power bipolar module Very low Rth junction case Specific accidental overload areas Fully insulated package (U.L. compliant) for easy mounting Low internal parasitic inductance In compliance with the 2002/93/EC European Directive Pin 4 not connected ISOTOP Applications ■ ■ ■ Motor control SMPS & UPS Welding equipment Internal schematic diagram Order codes Part Number BUV298V Marking BUV298V Package ISOTOP Packing Tube November 2006 Rev 3 1/12 www.st.com 12 B UV298V Contents 1 2 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2.1 2.2 Electrical characteristics (curves) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Test circuits and waveforms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 3 4 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 2/12 BUV298V Electrical ratings 1 Electrical ratings Table 1. Symbol VCEV Absolute maximum rating Parameter Collector-emitter voltage (VBE = -5V) Value 850 450 7 50 75 10 16 250 2500 -65 to 150 150 Unit V V V A A A A W V °C °C VCEO(sus) Collector-emitter voltage (IB = 0) VEBO IC ICM IB IBM Ptot Visol Tstg TJ Emitter-base voltage (IC = 0) Collector current Collector peak current (tP < 10ms) Base current Base peak current (tP < 10ms) Total dissipation at Tc = 25°C Insulation insulation withstand voltage (RMS) from all four leads to external heatsink Storage temperature Max. operating junction temperature Table 2. Symbol Rthj-case Rthc-h Thermal data Parameter Thermal resistance junction-case __max Thermal resistance case heatsink with conductive grease applied __max Value 0.5 0.05 Unit °C/W °C/W 3/12 Electrical characteristics BUV298V 2 Electrical characteristics (Tcase = 25°C unless otherwise specified) Table 3. Symbol ICER ICEV IEBO Electrical characteristics Parameter Collector cut-off current (RBE =5 ) Collector cut-off current (VBE =-5V) Emitter cut-off current (IC =0) Test Conditions VCE =VCEV VCE =VCEV VCE =VCEV VCE =VCEV VEB =5V L =25mH IC =0.2A Vclamp =450V IC =32A VCE =5V Tj =100 °C Tj =100 °C Min. Typ. Max. 0.4 2 0.4 2 2 Unit mA mA mA mA mA Collector-emitter VCEO(sus) (1) sustaining voltage (IB = 0) hFE VCE(sat) (1) DC current gain Collector-emitter saturation voltage Base-emitter saturation voltage Rate of rise of On-state collector Collector-emitter dynamic voltage Collector-emitter dynamic voltage Storage time Fall time Cross-over time VBE(sat) (1) dic/dt VCE(3 µs) VCE(5 µs) ts tf tc VCEW Maximum collectoremitter voltage without snubber Note (1) Pulsed duration = 300µs, duty cycle ≤1.5% 4/12 W 450 12 0.35 0.6 1 0.9 160 210 1.2 2 1.5 1.5 V IC =32A IB =6.4A IC =32A IB =6.4A Tj =100°C IC =32A IB =6.4A IC =32A IB =6.4A Tj =100°C VCC =300V RC =0 tp=3µs IB1 =9.6A IB1 =9.6A IB1 =9.6A IC =32A VBB=-5V IB1 =6.4A L =78µH Tj =100°C Tj =100°C Tj =100°C VCC =50V RBB =0.39Ω Vclamp =450V Tj =100°C VCC =300V RC =9.3Ω VCC =300V RC =9.3Ω V V V V A/µs 4.5 8 V 2.5 4 V 3.2 0.25 0.5 4.5 0.4 0.7 µs µs µs ICWoff =48A IB1 =6.4A VBB=-5V VCC =50V L =52µH Tj =125°C RBB =0.39Ω 450 V BUV298V Electrical characteristics 2.1 Electrical characteristics (curves) Figure 1. Safe operating area Figure 2. Thermal impedance Figure 3. Derating curves Figure 4. Collector-emitter voltage vs base-emitter resistance Figure 5. Collector-emitter saturation voltage Figure 6. Base-emitter saturation voltage 5/12 Electrical characteristics Figure 7. Reverse biased SOA Figure 8. Forward biased SOA BUV298V Figure 9. Reverse biased AOA Figure 10. Forward biased AOA Figure 11. Switching times Inductive load Figure 12. Switching times Inductive load vs temperature 6/12 BUV298V Figure 13. DC current gain Electrical characteristics 2.2 Test circuits and waveforms Figure 14. Turn-on switching test circuit 1) Fast electronic switch 2) Non-inductive resistor Figure 15. Turn-on switching waveforms 7/12 Electrical characteristics Figure 16. Turn-off switching test circuit BUV298V 1) Fast electronic switch 2) Non-inductive resistor 3) Fast recovery rectifier Figure 17. Turn-off switching waveforms 8/12 BUV298V Package mechanical data 3 Package mechanical data In order to meet environmental requirements, ST offers these devices in ECOPACK® packages. These packages have a Lead-free second level interconnect. The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com 9/12 Package mechanical data BUV298V ISOTOP MECHANICAL DATA DIM. A A1 B C C2 D D1 E E1 E2 G G1 G2 F F1 P P1 S 14.9 12.6 3.5 4.1 4.6 4 4 30.1 mm MIN. 11.8 8.9 7.8 0.75 1.95 37.8 31.5 25.15 23.85 24.8 15.1 12.8 4.3 4.3 5 4.3 4.4 30.3 0.586 0.496 0.137 0.161 0.181 0.157 0.157 1.185 TYP. MAX. 12.2 9.1 8.2 0.85 2.05 38.2 31.7 25.5 24.15 MIN. 0.465 0.350 0.307 0.029 0.076 1.488 1.240 0.990 0.938 0.976 0.594 0.503 1.169 0.169 0.196 0.169 0.173 1.193 inch TYP. MAX. 0.480 0.358 0.322 0.033 0.080 1.503 1.248 1.003 0.950 P093A 10/12 BUV298V Revision history 4 Revision history Table 4. Date 01-Mar-2003 14-Jan-2004 27-Nov-2006 Revision history Revision 1 2 3 Initial release. Technical migration from ST-press to EDOCS The document has been reformatted Changes 11/12 B UV298V Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZE REPRESENTATIVE OF ST, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS, WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS “AUTOMOTIVE GRADE” MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2006 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 12/12