BYT16P-400

® BYT16P-400 FAST RECOVERY RECTIFIER DIODES MAIN PRODUCT CHARACTERISTICS A1 IF(AV) VRRM VF (max) trr (max) FEATURES AND BENEFITS 16 A 400 V 1.4 V 35 ns K A2 K VERY LOW REVERSE RECOVERY TIME VERY LOW SWITCHING LOSSES LOW NOISE TURN-OFF SWITCHING A1 K A2 TO-220AB (Plastic) DESCRIPTION This double rectifier is suited for Switch Mode Power Supplies and other power converters. This device is intended to free-wheeling function in converters and motor control circuits. ABSOLUTE RATINGS (limiting values, per diode) Symbol VRRM IFRM IF(RMS) IF(AV) Parameter Repetitive peak reverse voltage Repetitive peak forward current RMS forward current Average forward current Tc = 100°C δ = 0.5 tp = 10 ms Sinusoidal tp=5 µs F=1kHz Value 400 300 30 16 Unit V A A A IFSM Tstg Tj Surge non repetitive forward current Storage temperature range Maximum operating junction temperature 100 - 40 to + 150 150 A °C °C October 1999 - Ed: 2A 1/5 BYT16P-400 THERMAL RESISTANCES Symbol Rth(j-c) Rth(c) When the diodes 1 and 2 are used simultaneously: ∆ Tj(diode 1) = P(diode) x Rth(j-c) (Per diode) + P(diode 2) x Rth(c) Parameter Junction to case Per diode Total Coupling Value 3.75 2 0.25 Unit °C/W STATIC ELECTRICAL CHARACTERISTICS Symbol VF * IR ** Parameter Forward voltage drop Reverse leakage current Test Conditions Tj = 25°C Tj = 100°C Tj = 25°C Tj = 100°C VR = VRRM IF = 8 A Min. Typ. Max. 1.5 1.4 15 2.5 µA mA Unit V Pulse test : * tp = 380 µs, δ < 2% ** tp = 5 ms, δ < 2% To evaluate the conduction losses use the following equation: P = 1.1 x IF(AV) + 0.024 IF2(RMS) RECOVERY CHARACTERISTICS Symbol trr Test Conditions Tj = 25°C IF = 1A VR = 30V dIF/dt = - 15A/µs IF = 0.5A IR = 1A Irr = 0.25A TURN-OFF SWITCHING CHARACTERISTICS Symbol tIRM IRM Parameter Maximum reverse recovery time Maximum reverse recovery current Turn-off overvoltage coefficient Test Conditions dIF/dt = - 32 A/µs dIF/dt = - 64 A/µs dIF/dt = - 32 A/µs dIF/dt = - 64 A/µs VCC = 200 V IF = 8 A Lp ≤ 0.05 µH Tj = 100°C (see fig. 11) Min. Typ. Max. Unit 75 ns 50 2.2 2.8 3.3 / A Min. Typ. Max. 75 35 Unit ns C= VRP VCC Tj = 100°C VCC = 120V IF = IF(AV) dIF/dt = - 8A/µs Lp = 9µH (see fig. 12) Fig. 1: Low frequency power losses versus average current. Fig. 2: Peak current versus form factor. 2/5 BYT16P-400 Fig. 3: Non repetitive peak surge current versus overload duration. Fig. 4: Thermal impedance versus pulse width. Fig. 5: Voltage drop versus forward current. Fig. 6: Recovery charge versus dIF/dt. Fig. 7: Recovery time versus dIF/dt. Fig. 8: Peak reverse current versus dIF/dt. 3/5 BYT16P-400 Fig. 9: Peak forward voltage versus dIF/dt. Fig. 10: Dynamic parameters versus junction temperature. Fig. 11: Turn-off switching characteristics (without series inductance). Fig. 12: Turn-off switching characteristics (with series inductance). 4/5 BYT16P-400 PACKAGE MECHANICAL DATA TO-220AB DIMENSIONS REF. H2 Dia L5 C L7 L6 L2 F2 F1 L9 L4 F G1 G M E D A Millimeters Min. Max. 4.40 4.60 1.23 1.32 2.40 2.72 0.49 0.70 0.61 0.88 1.14 1.70 1.14 1.70 4.95 5.15 2.40 2.70 10 10.40 16.4 typ. 13 14 2.65 2.95 15.25 15.75 6.20 6.60 3.50 3.93 2.6 typ. 3.75 3.85 Inches Min. Max. 0.173 0.181 0.048 0.051 0.094 0.107 0.019 0.027 0.024 0.034 0.044 0.066 0.044 0.066 0.194 0.202 0.094 0.106 0.393 0.409 0.645 typ. 0.511 0.551 0.104 0.116 0.600 0.620 0.244 0.259 0.137 0.154 0.102 typ. 0.147 0.151 A C D E F F1 F2 G G1 H2 L2 L4 L5 L6 L7 L9 M Diam. Ordering type BYT16P-400 Marking BYT16P-400 Package TO-220AB Weight 2.03 g. Base qty 30 Delivery mode Tube Cooling method: by conduction (C) Recommended torque value: 0.08 N.m. Maximum torque value: 0.10 N.m. Epoxy meets UL94,V0 Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. The ST logo is a registered trademark of STMicroelectronics © 1999 STMicroelectronics - Printed in Italy - All rights reserved. STMicroelectronics GROUP OF COMPANIES Australia - Brazil - China - Finland - France - Germany - Hong Kong - India - Italy - Japan - Malaysia Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - U.S.A. http://www.st.com 5/5