BYW80-200

® BYW80F/FP-200 HIGH EFFICIENCY FAST RECOVERY RECTIFIER DIODES MAIN PRODUCTS CHARACTERISTICS IF(AV) VRRM Tj (max) VF (max) trr (max) 20 A 200 V 150°C 0.85 V 35 ns TO-220AC BYW80-200 ISOWATT220AC BYW80F-200 K A K A FEATURES Suited for SMPS Very low forward losses Negligible switching losses High surge current capability Insulated packages: ISOWATT220AC / TO-220FPAC: Insulation voltage = 2000 V DC Capacitance = 12 pF s s s s s A K DESCRIPTION Single chip rectifier suited for Switch Mode Power Supplies and high frequency DC to DC converters. Packaged in TO-220AC, ISOWATT220AC and TO-220FPAC this device is intended for use in low voltage, high frequency inverters, free wheeling and polarity protection applications. ABSOLUTE MAXIMUM RATINGS Symbol VRRM IF(RMS) IF(AV) Parameter Repetitive peak reverse voltage RMS forward current Average forward current δ = 0.5 TO-220AC Tc=120°C TO-220FPAC BYW80FP-200 Value 200 20 10 10 100 - 65 to + 150 + 150 Unit V A A ISOWATT220AC Tc=95°C TO-220FPAC tp=10ms sinusoidal IFSM Tstg Tj Surge non repetitive forward current Storage and junction temperature range Maximum operating temperature range A °C °C January 2002 - Ed: 3G 1/7 BYW80F/FP-200 THERMAL RESISTANCE Symbol Rth (j-c) Junction to case Parameter TO-220AC ISOWATT220AC / TO-220FPAC Value 2.5 4.7 Unit °C/W ELECTRICAL CHARACTERISTICS STATIC CHARACTERISTICS Symbol IR * Tj = 25°C Tj = 100°C VF ** Tj = 125°C Tj = 125°C Tj = 25°C IF = 7 A IF = 15 A IF = 15 A Test Conditions VR = VRRM Min. Typ. Max. 10 1 0.85 1.05 1.15 Unit µA mA V Pulse test : * tp = 5 ms, duty cycle < 2 % ** tp = 380 µs, duty cycle < 2 % To evaluate the conduction losses use the following equation : P = 0.65 x IF(AV) + 0.027 x IF2(RMS) RECOVERY CHARACTERISTICS Symbol trr Tj = 25°C Test Conditions IF = 0.5A IR = 1A IF = 1A VR = 30V tfr VFP Tj = 25°C Tj = 25°C IF = 1A VFR = 1.1 x VF IF = 1A Irr = 0.25A dIF/dt = -50A/µs tr = 10 ns tr = 10 ns 15 2 Min. Typ. Max. 25 35 ns V Unit ns 2/7 BYW80F/FP-200 Fig. 1: Average forward power dissipation versus average forward current P F(av)(W) =0.1 =0.05 =0.2 =0.5 =1 Fig. 2: Peak current versus form factor 14 12 10 8 6 4 2 200 175 150 125 100 T IM(A) T P=10W =tp/T tp I M 75 50 P=5W P=15W I F(av)(A) 1 2 3 4 5 6 7 8 =tp/T tp 25 0 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 0 0 9 10 11 12 13 14 Fig. 3: Forward voltage drop versus forward current (maximum values) VFM(V) 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0.0 Tj=125 oC Fig. 4: Relative variation of thermal impedance junction to case versus pulse duration (TO-220AC) 1.0 K Zth(j-c) (tp. K= Rth(j-c) =0.5 =0.2 =0.1 ) 0.5 T 0.2 IFM(A) 1 10 100 Single pulse 0.1 0.1 1.0E-03 1.0E-02 tp(s) 1.0E-01 =tp/T tp 1.0E+00 Fig. 5: Relative variation of thermal impedance junction to case versus pulse duration. (ISOWATT220AC / TO-220FPAC) 1 K Zth(j-c) (tp. K= Rth(j-c) ) Fig. 6: Non repetitive surge peak forward current versus overload duration (TO-220AC) IM(A) 100 90 80 70 60 50 Tc=25 o C Tc=75 o C Tc=120 o C 0.8 =0.5 0.6 =0.2 0.4 =0.1 40 T Single pulse 0.2 30 IM 20 10 tp 0 1.0E-03 tp(s) 1.0E-02 1.0E-01 =tp/T t =0.5 t(s) 0.01 0.1 1 1.0E+00 1.0E+01 0 0.001 3/7 BYW80F/FP-200 Fig. 7: Non repetitive surge peak forward current versus overload duration (ISOWATT220AC / TO-220FPAC) IM(A) Fig. 8: Average current versus ambient temperature (duty cycle : 0.5) (TO-220AC) I F(av)(A) Rth(j-a)=Rth(j-c) 80 70 60 50 40 30 20 10 12 11 10 9 8 7 Tc=25 o C Tc=50 oC Rth(j-a)=15 o C/W =0.5 6 5 4 3 2 1 =tp/T tp T IM t =0.5 Tc=95 o C t(s) 0.1 1 10 Tamb( o C) 60 80 100 120 140 160 0 0.001 0.01 0 0 20 40 Fig. 9: Average current versus ambient temperature (duty cycle: 0.5) (ISOWATT220AC / TO-220FPAC) I F(av)(A) 12 11 Rth(j-a)=Rth(j-c) 10 9 8 Rth(j-a)=15 o C/W 7 6 =0.5 5 T 4 3 2 1 =tp/T tp Tamb( o C) 0 0 20 40 60 80 100 120 140 Fig. 10: Junction capacitance versus reverse voltage applied (Typical values) C(pF) VR(V) 160 Fig. 11: Recovery charges versus dIF/dt. Fig. 12: Peak reverse current versus dIF/dt. QRR(nC) 90% CONFIDENCE Tj=125 o C I RM(A) IF=IF(av) 90% CONFIDENCE Tj=125 o C IF=IF(av) dIF/dt(A/us) dIF/dt(A/us) 4/7 BYW80F/FP-200 Fig. 13: Dynamic parameters versus junction temperature O QRR;IRM[Tj]/QRR;IRM[Tj=125 C] IRM QRR Tj( o C) PACKAGE MECHANICAL DATA TO-220AC (JEDEC outline) DIMENSIONS REF. A C D L7 Millimeters Min. Max. 4.60 1.32 2.72 0.70 0.88 1.70 5.15 10.40 14.00 2.95 15.75 6.60 3.93 3.85 4.40 1.23 2.40 0.49 0.61 1.14 4.95 10.00 13.00 2.65 15.25 6.20 3.50 3.75 Inches Min. 0.173 0.048 0.094 0.019 0.024 0.044 0.194 0.393 0.511 0.104 0.600 0.244 0.137 0.147 Max. 0.181 0.051 0.107 0.027 0.034 0.066 0.202 0.409 0.551 0.116 0.620 0.259 0.154 0.151 H2 C L5 ØI L6 L2 D A E F F1 G H2 L2 L4 L9 F1 L4 16.40 typ. 0.645 typ. F G M E L5 L6 L7 L9 M Diam. I 2.6 typ. 0.102 typ. 5/7 BYW80F/FP-200 PACKAGE MECHANICAL DATA ISOWATT220AC (JEDEC outline) A H B DIMENSIONS REF. Millimeters Min. A B D E F F1 G H L2 L3 L6 L7 Diam Max. Inches Min. Max. Diam L6 L2 L3 L7 F1 F G D E 4.40 4.60 2.50 2.70 2.40 2.75 0.40 0.70 0.75 1.00 1.15 1.70 4.95 5.20 10.00 10.40 16.00 typ. 28.60 30.60 15.90 16.40 9.00 9.30 3.00 3.20 0.173 0.181 0.098 0.106 0.094 0.108 0.016 0.028 0.030 0.039 0.045 0.067 0.195 0.205 0.394 0.409 0.63 typ. 1.125 1.205 0.626 0.646 0.354 0.366 0.118 0.126 PACKAGE MECHANICAL DATA TO-220FPAC REF. A H B DIMENSIONS Millimeters Min. Max. Inches Min. Max. 0.173 0.181 0.098 0.106 0.098 0.108 0.018 0.027 0.030 0.039 0.045 0.067 0.195 0.205 0.094 0.106 0.393 0.409 0.63 Typ. 1.126 1.205 0.386 0.417 0.114 0.142 0.626 0.646 0.354 0.366 0.118 0.126 Dia L6 L2 L3 L5 D F1 L4 L7 F G1 G E A B D E F F1 G G1 H L2 L3 L4 L5 L6 L7 Dia. 4.4 4.6 2.5 2.7 2.5 2.75 0.45 0.70 0.75 1 1.15 1.70 4.95 5.20 2.4 2.7 10 10.4 16 Typ. 28.6 30.6 9.8 10.6 2.9 3.6 15.9 16.4 9.00 9.30 3.00 3.20 6/7 BYW80F/FP-200 Type BYW80-200 BYW80F-200 BYW80FP-200 s Marking BYW80-200 BYW80F-200 BYW80FP-200 Package TO-220AC ISOWATT220AC TO-220FPAC Weight 2.3 g 2g 1.8 g Base Qty 50 50 50 Delivery mode Tube Tube Tube s s s s s Cooling method: by conduction (C) Recommended torque value (ISOWATT220AC, TO-220FPAC): 0.55 nm Maximum torque value (ISOWATT220AC, TO-220FPAC): 0.7 Nm Recommended torque value (TO-220AC): 0.8 Nm Maximum torque value (TO-220AC): 1.0 Nm Epoxy meets UL94, V0 Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. The ST logo is a registered trademark of STMicroelectronics © 2002 STMicroelectronics - Printed in Italy - All rights reserved. STMicroelectronics GROUP OF COMPANIES Australia - Brazil - Canada - China - Finland - France - Germany Hong Kong - India - Israel - Italy - Japan - Malaysia - Malta - Morocco - Singapore Spain - Sweden - Switzerland - United Kingdom - United States. http://www.st.com 7/7