C06IE170HV

STC06IE170HV Emitter switched bipolar transistor ESBT® 1700V - 6A - 0.15Ω PRELIMINARY DATA Features VCS(ON) 0.7V ■ ■ ■ ■ ■ ■ IC 6A RCS(ON) 0.15Ω High voltage / high current cascode configuration Low equivalent on resistance Very fast-switch, up to 150 kHz Squared RBSOA, up to 1700 V Very low CISS driven by RG = 47Ω Very low turn-off cross over time 1 23 4 TO247-4L HV Description The STC06IE170HV is manufactured in Monolithic ESBT technology, aimed to provide the best performance in High Frequency / High voltage applications. It is designed for use in Gate Driven based topologies. Internal schematic diagram Application ■ Auxiliary SMPS for three phase mains Order code Part number STC06IE170HV Marking C06IE170HV Package TO247-4L HV Packaging Tube May 2007 Rev 2 1/8 www.st.com 8 This is preliminary information on a new product now in development or undergoing evaluation. Details are subject to change without notice. Electrical ratings STC06IE170HV 1 Electrical ratings Table 1. Symbol VCS(SS) VBS(OS) VSB(OS) VGS IC ICM IB IBM Ptot Tstg TJ Absolute maximum ratings Parameter Collector-source voltage (VBS=VGS=0V) Base-source voltage (IC=0, VGS=0V) Source-base voltage (IC=0, VGS=0V) Gate-source voltage Collector current Collector peak current (tP< 5ms) Base current Base peak current (tP < 1ms) Total dissipation at Tc < 25°C Storage temperature Max. operating junction temperature Value 1700 30 17 ± 17 6 15 6 15 208 -40 to 150 150 Unit V V V V A A A A W °C °C Table 2. Symbol Rthj-case Thermal data Parameter Thermal resistance junction-case max Value 0.6 Unit °C/W 2/8 STC06IE170HV Electrical characteristics 2 Electrical characteristics (TCASE=25°C unless otherwise specified) Table 3. Symbol ICS(SS) IBS(OS) ISB(OS) IGS(OS) VCS(ON) hFE VBS(ON) VGS(th) Ciss QGS(tot) ts tf ts tf VCS(dyn) VCS(dyn) Electrical characteristics Parameter Collector-source current (VBS=VGS=0V) Base-source current (IC=0, VGS=0V) Source-base current (IC=0, VGS=0V) Gate-source leakage (VBS=0V) Collector-source ON voltage DC current gain Base-source ON voltage Gate threshold voltage Input capacitance Gate-source charge Inductive load Storage time Fall time Inductive load Storage time Fall time Collector-source dynamic voltage (500ns) Collector-source dynamic voltage (1µs) Maximum collector-source voltage switched without snubber Test conditions VCS(SS)=1700V VBS(OS)=30V VSB(OS)=17V VGS = ±17V VGS=10V; IC =6; IB =1.2A VGS=10V; IC =2; IB =0.2A VCS=1V; VGS=10V; IC =6A VCS=1V; VGS=10V; IC =2A VGS=10V; IC =6; IB =1.2A VGS=10V; IC =2; IB =0.12A VBS=VGS; IB =250µA VCS=25V; VGS=0V; f =1MHz VGS=10V TBD 2 1 0.6 5.5 11 1.3 0.9 3 TBD TBD TBD 4 V V V pF nC ns Min. Typ. Max. 100 10 100 100 Unit µA µA µA nA V V TBD TBD ns TBD TBD TBD TBD V V VCSW RG=47Ω; hFE=5; IC=6A 1700 V 3/8 Electrical characteristics STC06IE170HV 2.1 Figure 1. Electrical characteristics (curves) Output characteristics Figure 2. DC current gain Figure 3. Collector-source on voltage Figure 4. Collector-source on voltage Figure 5. Base-source on voltage Figure 6. Base-source on voltage 4/8 STC06IE170HV Package mechanical data 3 Package mechanical data In order to meet environmental requirements, ST offers these devices in ECOPACK® packages. These packages have a Lead-free second level interconnect. The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com 5/8 Package mechanical data STC06IE170HV TO247-4L HV Mechanical data DIM. A A1 A2 b b2 c D D1 E e e1 L L1 L2 L3 øP S MIN. 4.85 2.20 0.95 2.50 0.40 23.85 15.45 2.54 5.08 10.20 2.20 mm . TYP 2.50 1.27 1.10 MA X. 5.15 2.60 1.30 2.90 0.80 24.15 15.75 24 21.50 15.60 2.50 18.50 3 5.50 10.80 2.80 3.55 3.65 7734874 6/8 STC06IE170HV Revision history 4 Revision history Table 4. Date 11-May-2007 21-May-2007 Revision history Revision 1 2 First version Base current values changed on Table 1 Changes 7/8 STC06IE170HV Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2007 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 8/8