DSL03-022SC6

DSL03 Low capacitance TVS for high speed lines such as xDSL Datasheet - production data Description DSL03 is designed to protect DSL line drivers against surges defined in worldwide telecommunication standards. This device protects line drivers of various systems such as ADSL and VDSL. The low capacitance makes it suitable from ADSL to VDSL2 data rates. DSL03 is able to survive severe conditions even when used with downgraded or oscillating gas tube. 627/ Features DSL03 is also suitable to be used on other lines when IEC61000-4-5 surge capability is required. • High surge capability to comply with GR-1089 and ITU-T K20/21 DSL03 is packaged in a SOT23-6L. • Keeps its peak power capability up to Tj max Figure 1. Functional diagram • Voltages: 10, 22 and 24 V • Low capacitance device: Ctyp = 0.5 pF • RoHS package • Low leakage current: 0.2 µA at 25 °C Complies with the following standards • Telcordia GR-1089 – 2.5 kV 2/10 µs - 500 A 2/10 µs – AC power fault tests ,2 9/' 9/' 9/' ,2 9/' • ITU-T K20/21/45 – 6 kV 10/700 µs - 150 A 5/310 µs – power induction tests – power contact tests • IEC 61000-4-2, level 4 – 15 kV (air discharge) – 8 kV (contact discharge • IEC 61000-4-5, level 2 – ±1 kV, 42 Ω • MIL STD 883G-Method 3015-7: Class 3 – 8 kV (human body model) February 2015 This is information on a product in full production. DocID022325 Rev 2 1/7 www.st.com Characteristics 1 DSL03 Characteristics Table 1. Absolute ratings (Tamb = 25 °C) Symbol Parameter Value Unit Vpp Peak pulse voltage IEC 61000-4-5 contact discharge 30 kV Ipp Peak pulse current 8/20µs 16 A -55 to 150 -40 to 125 °C °C 260 °C Tstg Tj Storage temperature range Operating junction temperature range TL Maximum temperature for soldering during 10s Table 2. Electrical characteristics (Tamb = 25 °C) IRM @ VRM VBR @ IBR I/O to I/O I/O to I/O VCL @ IPP 8/20 µs I/O to I/O Order code Max. Min V µA mA V Max. V C ΔC C I/O to I/O I/O to I/O I/O to I/O A typ. (1) max.(1) typ.(2) pF pF pF DSL03-010SC6 0.2 10 10.5 1 29 16 0.5 3 0.2 DSL03-022SC6 0.2 22 25 1 52 16 0.5 3 0.2 DSL03-024SC6 0.2 24 28 1 55 16 0.5 3 0.2 1. Test conditions: VR = 2 V bias, VRMS = 1 V, F = 1 MHz 2. Measured between 1 V and VRM Figure 2. Peak pulse power dissipation versus initial junction temperature (typical values, 8/20µs) Figure 3. Leakage current versus junction temperature (typical values) Ppp (W) 1000 (nA) 1.E+03 8/20 µs 900 VR=VRM 800 700 1.E+02 600 500 400 1.E+01 300 200 100 T j (°C) 0 2/7 25 50 75 Tj (°C) 1.E+00 0 100 125 150 25 DocID022325 Rev 2 50 75 100 125 DSL03 Characteristics Figure 4. Junction capacitance versus reverse voltage applied (typical values) (pF) 4 For lower voltages, maximum voltage applied is limited to V RM F=1 MHz Vosc =1VRMS T j=25 °C 3 2 1 DSL03-024SC6 VR(V) 0 0 2 4 6 8 10 12 14 16 18 20 22 24 Figure 5. VDSL2 class AB modem connection 9/' ,2 9/' 9/' 9/' '6/ /LQHGULYHUV 9/' ,2 9/' Figure 6. VDSL2 class H modem connection 9/' 9/' ,2 9/' /LQHGULYHUV 9/' 0ȍ ȍ '6/ 0Ÿ Ÿ 9/' ,2 9/' DocID022325 Rev 2 3/7 7 Package information 2 DSL03 Package information • Epoxy meets UL94, V0 • Lead-free package In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK® is an ST trademark. Figure 7. SOT23-6L dimension definitions A1 c q L H A E e D b e A2 Table 3. SOT23-6L dimension values Dimensions Ref. Millimeters Min. Max. Min. Max. A 0.90 1.45 0.035 0.057 A1 0 0.10 0 0.004 A2 0.90 1.30 0.035 0.051 b 0.35 0.50 0.014 0.020 c 0.09 0.20 0.004 0.008 D 2.80 3.05 0.11 0.118 E 1.50 1.75 0.059 0.069 e 4/7 Inches 0.95 0.037 H 2.60 3.00 0.102 0.118 L 0.10 0.60 0.004 0.024 θ 0° 10° 0° 10° DocID022325 Rev 2 DSL03 Package information Figure 8. Footprint recommendations dimensions in mm (inches) Figure 9. Marking layout     x x xx         DocID022325 Rev 2 5/7 7 Ordering information 3 DSL03 Ordering information Figure 10. Ordering information scheme DSL 0x - vvv SC6 DSL protection Version Stand-off voltage 10 = 10 V Package SC6 = SOT23-6L Table 4. Ordering information Ordering code 4 Marking DSL03-010SC6 ST10 DSL03-022SC6 ST22 DSL03-024SC6 ST24 Package Weight Base qty Delivery mode SOT23-6L 17.3 mg 3000 Tape and reel Revision history Table 5. Document revision history 6/7 Date Revision Changes 07-Feb-2014 1 Initial release 03-Feb-2015 2 Updated Features and Description. Added Figure 5 and Figure 6. DocID022325 Rev 2 DSL03 IMPORTANT NOTICE – PLEASE READ CAREFULLY STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgement. Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of Purchasers’ products. No license, express or implied, to any intellectual property right is granted by ST herein. Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product. ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners. Information in this document supersedes and replaces information previously supplied in any prior versions of this document. © 2015 STMicroelectronics – All rights reserved DocID022325 Rev 2 7/7 7