ECMF04-4HSM10
Datasheet
Common mode filter with ESD protection for high speed serial interface
Features
•
•
•
•
•
•
•
QFN-10L 2.6 x 1.35 x 0.5
D1+ Con
1
10 D1+ IC
D1- Con
2
9 D1- IC
GND 3
8 GND
D2+ Con
4
7 D2+ IC
D2- Con
5
6 D2- IC
Very large differential bandwidth to comply with HDMI Full HD, MIPI, USB2.0,
USB3.2 Gen 1, Display Port and other high speed serial interfaces
Provides -20 dB attenuation at 700 MHz in LTE bands
High common mode attenuation:- 25 dB between 800 MHz - 900 MHz
Low PCB space consumption
Thin package for compact applications: 0.55 mm max.
High reduction of parasitic elements through integration
RoHS package
Complies with the following standards
•
IEC 61000-4-2, level 4:
–
±15 kV (air discharge)
–
±8 kV (contact discharge)
Applications
•
•
•
•
Mobile phones
Notebook, laptop
Portable devices
PND
Description
Product status link
ECMF04-4HSM10
The ECMF04-4HSM10 is a highly integrated common mode filter designed to
suppress EMI/RFI common mode noise on high speed differential serial buses like
HDMI Full HD, MIPI, Display Port and other high speed serial interfaces.
Product summary
The device has a very large differential bandwidth to comply with these standards
and can protect and filter two differential lanes.
Order code
ECMF04-4HSM10
DS9770 - Rev 4 - December 2020
For further information contact your local STMicroelectronics sales office.
www.st.com
ECMF04-4HSM10
Characteristics
1
Characteristics
Table 1. Absolute maximum ratings (Tamb = 25 °C)
Symbol
Parameter
Value
Unit
Contact discharge
8
kV
Air discharge
16
IEC 61000-4-2:
VPP
Peak pulse voltage
IRMS
Maximum RMS current
Top
Operating ambient temperature range
Tj
100
-55 to +125
Maximum junction temperature
Tstg
mA
125
Storage temperature range
°C
-55 to +150
Figure 1. Electrical characteristics (definitions)
I
VRM
VCL
IRM
IPP
VBR
Maximum stand-off voltage
Clamping voltage at peak pulse current IPP
Leakage current at VRM
Peak pulse current
Breakdown voltage
RDC
DC serial resistance
fC
Differential cut off frequency
IPP
IR
IRM
V
VRM VBR VCL
Table 2. Electrical characteristics (Tamb = 25 °C)
Symbol
Test conditions
Min.
VBR
IR = 1 mA
IRM
VRM = 3 V per line
RDC
DC serial resistance
Typ.
Max.
Unit
6
V
100
nA
5
Ω
Table 3. Pin description
DS9770 - Rev 4
Pin number
Description
Pin number
Description
1
D1+ to connector
6
D2- to IC
2
D1- to connector
7
D2+ to IC
3
GND
8
GND
4
D2+ to connector
9
D1- to IC
5
D2- to connector
10
D1+ to IC
page 2/14
ECMF04-4HSM10
Characteristics (curves)
1.1
Characteristics (curves)
Figure 2. Differential attenuation versus frequency
(Z0_DIFF = 100 Ω)
Figure 3. Common mode attenuation versus frequency
(Z0_COM = 50 Ω)
SCC21(dB)
SDD21(dB)
f(Hz)
f(Hz)
Figure 4. ESD response to IEC61000-4-2 (+8 kV contact
discharge)
Figure 5. ESD response to IEC61000-4-2 (-8 kV contact
discharge)
Figure 6. HDMI1.4 3.35 Gbps eye diagram without
ECMF04-4HSM10
Figure 7. HDMI1.4 3.35 Gbps eye diagram with
ECMF04-4HSM10
DS9770 - Rev 4
page 3/14
ECMF04-4HSM10
Characteristics (curves)
Figure 8. USB2.0 480 Mbps eye diagram without device
Figure 9. USB2.0 480 Mbps eye diagram with device
Figure 10. USB3.2 Gen 1 5.0 Gbps eye diagram without
ECMF04-4HSM10 (with worst cable and equalizer)
Figure 11. USB3.2 Gen 1 5.0 Gbps eye diagram with
ECMF04-4HSM10 (with worst cable and equalizer)
Figure 12. MIPI D-PHY 2.5 Gbps long reference channel
eye diagram without ECMF04-4HSM10
Figure 13. MIPI D-PHY 2.5 Gbps long reference channel
eye diagram with ECMF04-4HSM10
DS9770 - Rev 4
page 4/14
ECMF04-4HSM10
Characteristics (curves)
Figure 14. TDR
Figure 15. Differential and common mode impedance
versus frequency
Z(Ω)
ZCOM
ZDIFF
f(Hz)
DS9770 - Rev 4
page 5/14
ECMF04-4HSM10
Application information
2
Application information
Figure 16. HDMI schematic
ECMF04
D0
ECMF04
HDMI A SIC
D2
HEA C-
HEA C+
HPD
Clock
UTIL ITY
HDMI c o n n ec t o r
D1
SDA
HDP_IC
SCL
SDA_IC
GND
SCL_IC
GND
CEC_IC
CEC
VDD_CEC
VDD_IC
VDD_CFC_IC
VDD_5V
5V_OUT
FAULT
HDMI2C1-6C1
More application information available in following AN:
•
AN4356: "Antenna desense on handheld equipment"
•
AN4511: "Common mode filters"
•
AN4540: "MHL link filtering and protection"
DS9770 - Rev 4
page 6/14
ECMF04-4HSM10
Package information
3
Package information
In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK packages,
depending on their level of environmental compliance. ECOPACK specifications, grade definitions and product
status are available at: www.st.com. ECOPACK is an ST trademark.
3.1
QFN-10L package information
Figure 17. QFN10L package outline
E
D
A1
A
TOP VIEW
SIDE VIEW
e
L
b
DS9770 - Rev 4
page 7/14
ECMF04-4HSM10
QFN10L package information
Table 4. QFN10L package mechanical data
Dimensions
Millimeters
Ref.
Min.
Typ.
Max.
A
0.45
0.50
0.55
A1
0.00
0.02
0.05
b
0.15
0.20
0.25
D
2.55
2.60
2.65
E
1.30
1.35
1.40
e
L
0.50
0.40
0.50
0.60
Figure 18. Footprint recommendations (mm)
DS9770 - Rev 4
page 8/14
ECMF04-4HSM10
PCB assembly recommendations
4
PCB assembly recommendation
Figure 19. Recommended PCB layout
Host
170 µm
Connector
170 µm
Differential
lanes
(Z0 = 100 )
Pad layout
5000 µm
150 µm
350 µm
350 µm
Differential
lanes
(Z0 = 100 )
330 µm
Figure 20. PCB stack dimensions
40 µm
105 µm
εr = 4.28
4.1
Solder paste
1.
2.
3.
4.
DS9770 - Rev 4
Halide-free flux qualification ROL0 according to ANSI/J-STD-004.
“No clean” solder paste is recommended.
Offers a high tack force to resist component movement during high speed.
Use solder paste with fine particles: powder particle size is 20-38 μm.
page 9/14
ECMF04-4HSM10
QFN-10L packing information
4.2
QFN-10L packing information
Figure 22. Package orientation in reel
Figure 21. Marking
XX
Pin 1 located according to EIA-481
Dot indicates pin 1
XX: Marking
Note:
Pocket dimensions are not on scale
Pocket shape may vary depending on package
Figure 23. Tape and reel orientation
Figure 24. Reel dimensions (mm)
Ø 180 max
14.4
2±0.5
Ø 13
Ø 60
Ø 20.2 min
Figure 25. Inner box dimensions (mm)
30
205
205
DS9770 - Rev 4
page 10/14
ECMF04-4HSM10
Solder reflow
Figure 26. Tape and reel outline
4.3
Solder reflow
Figure 27. ST ECOPACK® recommended soldering reflow profile for PCB mounting
250
240-245 °C
Temperature (°C)
-2 °C/s
2 - 3 °C/s
60 sec
(90 m ax)
200
-3 °C/s
150
-6 ° C/s
100
0.9 °C/s
50
Time (s)
0
Note:
DS9770 - Rev 4
30
60
90
120
150
180
210
240
270
300
Minimize air convection currents in the reflow oven to avoid component movement. Maximum soldering profile
corresponds to the latest IPC/JEDEC J-STD-020.
page 11/14
ECMF04-4HSM10
Ordering information
5
Ordering information
Figure 28. Ordering information scheme
ECMF 04 - 4
HS M10
Function
Common mode filter with ESD protection
Number of lines
04 = 4 filtered lines
Number of ESD protected lines
4 lines with ESD protection
Version
HS = High speed
Package
M10 = µQFN-10L
Order code
Marking
Package
Weight
Base qty.
Delivery mode
ECMF04-4HSM10
KK(1)
µQFN-10L
5 mg
3000
Tape and reel
1. The marking can be rotated by 90° to differentiate assembly location
DS9770 - Rev 4
page 12/14
ECMF04-4HSM10
Revision history
Table 5. Document revision history
DS9770 - Rev 4
Date
Version
Changes
03-Oct-2013
1
Initial release.
25-Aug-2014
2
Added Figure 5: Differential (ZDD21) and common mode (ZCC21) impedance
versus frequency.
13-Dec-2017
3
Updated Table 1.
09-Nov-2020
4
Updated Figure 6, Figure 7, Figure 8, Figure 9, Figure 10 and Figure 11.
Added Figure 12 and Figure 13.
page 13/14
ECMF04-4HSM10
IMPORTANT NOTICE – PLEASE READ CAREFULLY
STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST
products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST
products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgement.
Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of
Purchasers’ products.
No license, express or implied, to any intellectual property right is granted by ST herein.
Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product.
ST and the ST logo are trademarks of ST. For additional information about ST trademarks, please refer to www.st.com/trademarks. All other product or service
names are the property of their respective owners.
Information in this document supersedes and replaces information previously supplied in any prior versions of this document.
© 2020 STMicroelectronics – All rights reserved
DS9770 - Rev 4
page 14/14
很抱歉,暂时无法提供与“ECMF04-4HSM10”相匹配的价格&库存,您可以联系我们找货
免费人工找货