ECMF4-2450A60N10

ECMF4-2450A60N10 Datasheet Common mode filter with ESD protection for high speed serial interface Features • • D1+ to connector 1 10 D1+ to IC D1- to connector 2 9 D1- to IC GND 3 8 GND D2+ to connector 4 7 D2+ to IC D2- to connector 5 6 D2- to IC Product status ECMF4-2450A60N10 • • • • • 6.4 GHz differential bandwidth to comply with HDMI 2.1, HDMI 2.0, HDMI 1.4, USB 3.1 Gen 1 and Gen 2, MIPI, display port, etc. High common mode attenuation on WLAN frequencies : – From - 30 dB to - 33 dB at 2.4 – 2.47 GHz: Wi-Fi CH1-14 frequencies – From - 20 dB to - 15 dB at 5.18 – 5.82 GHz: Wi-Fi CH36-165 frequencies Very low PCB space consumption Thin package: 0.5 mm max. Lead free and RoHS package High reduction of parasitic elements through integration Exceeds IEC 61000-4-2 level 4 standards: – ±25 kV (air discharge) – ±10 kV (contact discharge) Applications • • • • • Notebook, laptop Streaming box Set top box Portable devices Tablet Description The ECMF4-2450A60N10 is a highly integrated common mode filter designed to suppress EMI/RFI common mode noise on high speed differential serial buses like HDMI 2.1, HDMI 2.0, HDMI1.4, USB 3.1 Gen 1 and Gen 2, ethernet, MIPI, display port and other high speed serial interfaces. It has a very large differential bandwidth to comply with these standards and can also protect and filter 2 differential lanes. DS12709 - Rev 2 - April 2019 For further information contact your local STMicroelectronics sales office. www.st.com ECMF4-2450A60N10 Characteristics 1 Characteristics Table 1. Absolute maximum ratings (Tamb = 25 °C) Symbol Parameter Value Unit Contact discharge 10 kV Air discharge 25 IEC 61000-4-2: VPP Peak pulse voltage IRMS Maximum RMS current Top Maximum operating temperature range -55 to +125 Tstg Storage temperature range -55 to +150 TL 100 Maximum temperature for soldering during 10 s mA °C 260 Figure 1. Electrical characteristics (definitions) I VRM VCL IRM IPP VBR CDIODE RDC fC Maximum stand-off voltage Clamping voltage at peak pulse current IPP Leakage current at VRM Peak pulse current Breakdown voltage ESD diode capacitance DC serial resistance Differential cut off frequency IPP IR IRM V VRM VBR VCL Table 2. Electrical characteristics (Tamb = 25 °C) Symbol VBR IRM RDC fc VCL CDIODE DS12709 - Rev 2 Test conditions IR = 1 mA VRM = 3.6 V per line Min. Typ. 5.3 5.8 Max. Unit V 6.0 GHz Package N10 = µQFN 10-L 400 µm pitch Table 6. Ordering information Order code Marking Package Weight Base qty. Delivery mode ECMF4-2450A60N10 MJ(1) µQFN-10L 3.9 mg 3000 Tape and reel 1. The marking can be rotated by 90° to differentiate assembly location DS12709 - Rev 2 page 12/14 ECMF4-2450A60N10 Revision history Table 7. Document revision history DS12709 - Rev 2 Date Revision Changes 27-Jul-2018 1 Initial release. 24-Apr-2019 2 Updated Table 6. page 13/14 ECMF4-2450A60N10 IMPORTANT NOTICE – PLEASE READ CAREFULLY STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgement. Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of Purchasers’ products. No license, express or implied, to any intellectual property right is granted by ST herein. Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product. ST and the ST logo are trademarks of ST. For additional information about ST trademarks, please refer to www.st.com/trademarks. All other product or service names are the property of their respective owners. Information in this document supersedes and replaces information previously supplied in any prior versions of this document. © 2019 STMicroelectronics – All rights reserved DS12709 - Rev 2 page 14/14