EFL1-NFC-PMB

EFL1-NFC-PMB EnFilm™ EFL70039 power management board with NFC wireless smart charger Data brief Features  Embedded 25 mW NFC contact-less smart charger based on the ST M24LR04E-R dynamic NFC/RFID tag IC  Charge control and deep discharge protection of the EFL700A39 using an advanced ST ultralow current consumption power management IC  Additional power input pin for wire plugging of an external charger like an Energy Harvesting source or any other power supply Description The EFL1-NFC-PMB kit is a power management board (PMB) including the ST EnFilm™ EFL700A39 energy source with a complete set of power management functionalities for a direct connection to the application. 1.#
UPQ
WJFX Table 1. Device summary Parameter Dimensions Thickness Value 38.0 x 36.0 mm 3.0 mm 1.#
CPUUPN
WJFX TM: EnFilm is a trademark of STMicroelectronics April 2016 DocID029244 Rev 1 For further information contact your local STMicroelectronics sales office. 1/4 www.st.com References 1 EFL1-NFC-PMB References For a functional description and guidelines on the use of the EFL700A39, please refer to the following publications:  User manual UM1806: “EFL700A39 evaluation board kits and design-in board user guide“.  Datasheet: EFL700A39: “EnFilm™ - rechargeable solid state lithium thin film battery”. These documents are available at: www.st.com. 2/4 DocID029244 Rev 1 EFL1-NFC-PMB 2 Ordering information Ordering information Table 2. Ordering information 3 Order code Marking Weight Base qty Delivery mode EFL1-NFC-PMB EFL1-NFC-PMB 3g 1 Blister pack Revision history Table 3. Document revision history Date Revision 20-Apr-2016 1 Changes Initial release. DocID029244 Rev 1 3/4 4 EFL1-NFC-PMB IMPORTANT NOTICE – PLEASE READ CAREFULLY STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgement. Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of Purchasers’ products. No license, express or implied, to any intellectual property right is granted by ST herein. Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product. ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners. Information in this document supersedes and replaces information previously supplied in any prior versions of this document. © 2016 STMicroelectronics – All rights reserved 4/4 DocID029244 Rev 1