EVAL-L5963

EVAL-L5963 EVAL-L5963Q EVAL-L5963 and EVAL-L5963Q evaluation boards Data brief         Oscillator on board to change working frequency up to 2MHz DC-DC1 and DC-DC2 working up to 3A LDO working at 3.3 V, 250 mA Possibility to change output voltages Jumpers to enable or disable DC-DC Jumpers to enable or disable LDO Pins to independently supply DC-DC1 and DC-DC2 together with LDO Output connectors to check output voltages Description EVAL-L5963 and EVAL-L5963Q are two evaluation boards supporting the multichannel voltage regulator L5963 in PowerSSO-36 slug down and VQFPN-48 packages respectively. The boards offer the flexibility to independently supply the various regulators and to work at a frequency up to 2 MHz. Device summary Table 1: Device summary Features    Order code Reference EVAL-L5963 L5963D EVAL-L5963Q L5963Q DC-DC1 working at 1.2 V, 2 MHz DC-DC2 working at 5 V, 250 kHz Input connector to sync a different working frequency up to 2MHz January 2017 DocID028387 Rev 2 For further information contact your local STMicroelectronics sales office 1/3 www.st.com Revision history 1 EVAL-L5963, EVAL-L5963Q Revision history Table 2: Revision history 2/3 Date Revision Changes 26-Oct-2015 1 Initial release. 10-Jan-2017 2 Added EVAL-L5963Q. DocID028387 Rev 2 EVAL-L5963, EVAL-L5963Q IMPORTANT NOTICE – PLEASE READ CAREFULLY STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgement. Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of Purchasers’ products. No license, express or implied, to any intellectual property right is granted by ST herein. Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product. ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners. Information in this document supersedes and replaces information previously supplied in any prior versions of this document. © 2017 STMicroelectronics – All rights reserved DocID028387 Rev 2 3/3