EVAL-SCS001V1

EVAL-SCS001V1 Data brief Fast and easy migration from DC barrel to Type-C Features • • • • USB Power Delivery SINK port Short-to VBUS protection up to 28 V Low BOM cost, small footprint Status LED Description The EVAL-SCS001V1 reference design allows user to create a USB Type-C connector quickly and easily in order to power any application up to 100 W (20 V, 5 A). Product status link EVAL-SCS001V1 Product summary Stand-alone USB PD controller STUSB4500 DB3825 - Rev 4 - November 2019 For further information contact your local STMicroelectronics sales office. www.st.com EVAL-SCS001V1 Schematic diagram 1 Schematic diagram Figure 1. EVAL-SCS001V1 schematic diagram Vbus R10 100k A6 A7 A8 A9 A10 A11 C50 4.7µF A12 Rx-1 Vbus Vbus CC1 Sbu2 D+1 D-2 D-1 D+2 Sbu1 CC2 Vbus Rx-2 USB 3.1 TYPE C Rx+2 Vbus Tx-2 Tx+2 GND GND B10 B9 B7 B6 B5 CC2 C1 1µF C2 1µF B4 23 B3 B2 B1 21 D50 ESDA25P35 3 22 24 CC1 2 CC2 4 5 D1 ESDA25W DB3825 - Rev 4 SCL SDA Vsnk CC1 CC2 TP10 TP11 TP12 TP13 TP14 J10 U1 STUSB4500 VBus_EN_SNK Disch VBUS_VS_Disch GPIO Power_OK2 Vbus 100nF R2 1k 1 TP1 TP2 TP3 TP4 C12 100 2V7 18 2V7 R12 R1 1k B8 VDD A5 Tx-1 R11 22k VSYS CC1 Rx+1 Tx+1 B11 Not_used A3 A4 GND GND VReg_1V2 A2 VSNK D11 ESDA25P35 B12 J1 VReg_2V7 A1 Vsnk T1 STL6P3LLH6 13 12 CC1DB CC1 Power_OK3 16 Disch 15 GPIO 20 Power_PDO2 14 Power_PDO3 Standalone USB PD controller 17 A_B_Side with sink auto-runmode CC2 Attach CC2DB 11 R20 22k R21 22k A_B_Side Attach SCL 7 SCL SDA 8 SDA ALERT# 19 Addr1 LD20 9 Alert# Reset 6 Addr0 GND 10 ExpPAD 0 page 2/4 EVAL-SCS001V1 Revision history Table 1. Document revision history DB3825 - Rev 4 Date Version Changes 15-Jan-2019 1 Initial release. 29-Apr-2019 2 Updated cover image. 22-Oct-2019 3 Updated Figure 1. EVAL-SCS001V1 schematic diagram. 20-Nov-2019 4 Minor text changes page 3/4 EVAL-SCS001V1 IMPORTANT NOTICE – PLEASE READ CAREFULLY STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgement. Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of Purchasers’ products. No license, express or implied, to any intellectual property right is granted by ST herein. Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product. ST and the ST logo are trademarks of ST. For additional information about ST trademarks, please refer to www.st.com/trademarks. All other product or service names are the property of their respective owners. Information in this document supersedes and replaces information previously supplied in any prior versions of this document. © 2019 STMicroelectronics – All rights reserved DB3825 - Rev 4 page 4/4