EVAL-VNH5019-P1
VNH5019 Motor Driver Carrier
Data brief - production data
application, like pull-up's and protection resistors
and FETs for reverse battery protection. This
module is designed By POLOLU and distributed
by ST. It is delivered fully populated with its SMD
components, including the VNH5019, as shown in
the product picture.
For more information please visit Pololu web site.
Table 1. Device summary
Order code
Features
EVAL-VNH5019-P1
• Operating voltage: 5.5 - 24 V
Reference
EVAL-VNH5019-P1
Evaluation board
• Output current: 12 A continuous (30 maximum)
• 5V and 3.3 V compatible inputs
• PWM operation up to 20 kHz for quieter motor
operation
• Current sense output proportional to motor
current
• Motor indicator LEDs (indicates what the
outputs are doing even when no motor is
connected)
• SPC5Studio makes it easy to get started using
this board and SPC56 32-bit power
architecture MCU's
• Robust:
– Reverse-voltage protection
– Can survive input voltages up to 41 V
– Undervoltage and overvoltage shutdown
– High-side and low-side thermal shutdown
– Short-to-ground and short-to-Vcc
protection
Description
This module is a compact breakout board for ST's
high-power VNH5019 motor driver IC, a fully
integrated H-bridge that can be used for
bidirectional speed control of a single brushed DC
motor most of the components of the typical
May 2014
DocID025580 Rev 2
This is information on a product in full production. For further information contact your local STMicroelectronics sales
office.
1/3
www.st.com
Revision history
1
EVAL-VNH5019-P1
Revision history
Table 1. Documen revision history
2/3
Date
Revision
Changes
06-Dec-2013
1
Initial release.
21-May-2014
2
Updated Description.
Add Table 1.
DocID025580 Rev 2
EVAL-VNH5019-P1
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
ST PRODUCTS ARE NOT DESIGNED OR AUTHORIZED FOR USE IN: (A) SAFETY CRITICAL APPLICATIONS SUCH AS LIFE
SUPPORTING, ACTIVE IMPLANTED DEVICES OR SYSTEMS WITH PRODUCT FUNCTIONAL SAFETY REQUIREMENTS; (B)
AERONAUTIC APPLICATIONS; (C) AUTOMOTIVE APPLICATIONS OR ENVIRONMENTS, AND/OR (D) AEROSPACE APPLICATIONS
OR ENVIRONMENTS. WHERE ST PRODUCTS ARE NOT DESIGNED FOR SUCH USE, THE PURCHASER SHALL USE PRODUCTS AT
PURCHASER’S SOLE RISK, EVEN IF ST HAS BEEN INFORMED IN WRITING OF SUCH USAGE, UNLESS A PRODUCT IS
EXPRESSLY DESIGNATED BY ST AS BEING INTENDED FOR “AUTOMOTIVE, AUTOMOTIVE SAFETY OR MEDICAL” INDUSTRY
DOMAINS ACCORDING TO ST PRODUCT DESIGN SPECIFICATIONS. PRODUCTS FORMALLY ESCC, QML OR JAN QUALIFIED ARE
DEEMED SUITABLE FOR USE IN AEROSPACE BY THE CORRESPONDING GOVERNMENTAL AGENCY.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2014 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
DocID025580 Rev 2
3/3
1
很抱歉,暂时无法提供与“EVAL-VNH5019-P1”相匹配的价格&库存,您可以联系我们找货
免费人工找货