EVALST-ISOSD61T

EVALST-ISOSD61T Data brief Evaluation board for ISOSD61 isolated sigma-delta converter. Features • • • • • • • • • • 6 kV galvanic isolation 30 kV/µs high common-mode transient immunity 16-bit resolution, no missing codes ±320mV full scale differential input signal range Up to 25 MHz external clock input High SNR (86 dB) and bandwidth (49 kHz) –40°C to +125°C extended industrial temperature range Coaxial and header pins available for flexible access to the inputs and outputs TTL/CMOS digital I/O (ISOSD61) Additional pads for the connection of a shunt current sensor Description The EVALST-ISOSD61T is a full-featured evaluation board designed to allow the user to evaluate all the features of the ISOSD61 isolated analog-to-digital converter (ADC). The ISOSD61 device is a 1-bit sigma-delta modulator with an output buffer separated from the input interface circuitry by a galvanic isolation barrier. The isolation barrier provides galvanic isolation of up to 6000 VPEAK. When used in combination with a digital filter, the ISOSD61 device can be used to achieve 16-bit analog-to-digital (A/D) conversion with no missing codes. Product status link EVALST-ISOSD61T DB4383 - Rev 2 - January 2021 For further information contact your local STMicroelectronics sales office. www.st.com EVALST-ISOSD61T Revision history Table 1. Document revision history DB4383 - Rev 2 Date Version Changes 11-Jan-2021 1 Initial release. 15-Jan-2021 2 Title updated. page 2/4 EVALST-ISOSD61T Contents Contents Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 DB4383 - Rev 2 page 3/4 EVALST-ISOSD61T IMPORTANT NOTICE – PLEASE READ CAREFULLY STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgement. Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of Purchasers’ products. No license, express or implied, to any intellectual property right is granted by ST herein. Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product. ST and the ST logo are trademarks of ST. For additional information about ST trademarks, please refer to www.st.com/trademarks. All other product or service names are the property of their respective owners. Information in this document supersedes and replaces information previously supplied in any prior versions of this document. © 2021 STMicroelectronics – All rights reserved DB4383 - Rev 2 page 4/4