GP19NC60W

STGP19NC60W N-channel 600V - 19A - TO-220 Ultra fast PowerMESH™ IGBT PRELIMINARY DATA Features Type STGP19NC60W ■ ■ VCES 600V IC @100°C (max)@25°C < 2.5V 22A VCE(sat) High frequency operation 3 Low CRES / CIES ratio (no cross-conduction susceptbility) 1 2 TO-220 Description Using the latest high voltage technology based on a patented strip layout, STMicroelectronics has designed an advanced family of IGBTs, the PowerMESH™ IGBTs, with outstanding performances. The suffix “W” identifies a family optimized for very high frequency application. Internal schematic diagram Applications ■ ■ High frequency motor controls, inverters, UPS HF, SMPS and PFC in both hard switch and resonant topologies Order code Part number STGP19NC60W Marking GP19NC60W Package TO-220 Packaging Tube May 2007 Rev 2 1/13 www.st.com 13 This is preliminary information on a new product now in development or undergoing evaluation. Details are subject to change without notice. Contents STGP19NC60W Contents 1 2 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2.1 Electrical characteristics (curves) ............................ 6 3 4 5 Test circuit ................................................ 9 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 2/13 STGP19NC60W Electrical ratings 1 Electrical ratings Table 1. Symbol VCES IC(1) IC(1) ICL (2) VGE PTOT Tstg Tj Absolute maximum ratings Parameter Collector-emitter voltage (VGS = 0) Collector current (continuous) at TC = 25°C Collector current (continuous) at TC = 100°C Collector current (pulsed) Gate-emitter voltage Total dissipation at TC = 25°C Storage temperature – 55 to 150 Operating junction temperature °C Value 600 40 22 35 ±20 125 Unit V A A A V W 1. Calculated according to the iterative formula:: T –T JMAX C I ( T ) = ----------------------------------------------------------------------------------------------------CC R ×V (T , I ) THJ – C CESAT ( MAX ) C C 2. Vclamp=480V, Tj=150°C, RG=10Ω, VGE=15V Table 2. Symbol Rthj-case Rthj-amb Thermal resistance Parameter Thermal resistance junction-case max Thermal resistance junction-ambient max Value 1 62.5 Unit °C/W °C/W 3/13 Electrical characteristics STGP19NC60W 2 Electrical characteristics (TCASE=25°C unless otherwise specified) Table 3. Symbol VBR(CES) VCE(sat) VGE(th) ICES IGES gfs Static Parameter Collector-emitter breakdown voltage Test conditions IC= 1mA, VGE= 0 Min. 600 2.1 1.8 3.75 2.5 Typ. Max. Unit V V V V µA mA nA S Collector-emitter saturation VGE= 15V, IC= 12A voltage VGE= 15V, IC=12A,Tc=125°C Gate threshold voltage Collector cut-off current (VGE = 0) Gate-emitter leakage current (VCE = 0) Forward transconductance VCE= VGE, IC= 250 µA VCE= Max rating,TC= 25°C VCE= Max rating,TC= 125°C VGE= ±20V , VCE= 0 VCE = 15V, IC= 12A 5.75 150 1 ±100 10 Table 4. Symbol Cies Coes Cres Qg Qge Qgc Dynamic Parameter Input capacitance Output capacitance Reverse transfer capacitance Total gate charge Gate-emitter charge Gate-collector charge Test conditions VCE = 25V, f = 1MHz, VGE = 0 VCE = 390V, IC = 5A, VGE = 15V, (See figure 15) Min. Typ. 1180 130 26 53 10 21 Max. Unit pF pF pF nC nC nC 4/13 STGP19NC60W Electrical characteristics Table 5. Symbol td(on) tr (di/dt)on td(on) tr (di/dt)on tr(Voff) td(off) tf tr(Voff) td(off) tf Switching on/off (inductive load) Parameter Turn-on delay time Current rise time Turn-on current slope Turn-on delay time Current rise time Turn-on current slope Off voltage rise time Turn-off delay time Current fall time Off voltage rise time Turn-off delay time Current fall time Test conditions VCC = 390V, IC = 12A , RG= 10Ω VGE= 15V, (See figure 16) VCC = 390V, IC = 12A , RG= 10Ω VGE= 15V, Tj = 125°C (See figure 16) VCC = 390V, IC = 12A RG= 10Ω VGE= 15V, , (See figure 16) VCC = 390V, IC = 12A , RG= 10Ω VGE= 15V, Tj = 125°C (See figure 16) Min. Typ. 25 7 1600 25 8 1400 22 90 43 47 127 77 Max. Unit ns ns A/µs ns ns A/µs ns ns ns ns ns ns Table 6. Symbol Eon(1) Eoff(2) Ets Eon(1) Eoff(2) Ets Switching energy (inductive load) Parameter Turn-on switching losses Turn-off switching losses Total switching losses Turn-on switching losses Turn-off switching losses Total switching losses Test conditions VCC = 390V, IC = 12A , RG= 10Ω VGE= 15V, (See figure 16) VCC = 390V, IC = 12A RG= 10Ω VGE= 15V, , Tj = 125°C (See figure 16) Min. Typ. 81 125 206 161 255 416 Max. Unit µJ µJ µJ µJ µJ µJ 1. Eon is the turn-on losses when a typical diode is used in the test circuit in figure 14 If the IGBT is offered in a package with a co-pak diode, the co-pack diode is used as external diode. IGBTs & Diode are at the same temperature (25°C and 125°C) 2. Turn-off losses include also the tail of the collector current 5/13 Electrical characteristics STGP19NC60W 2.1 Figure 1. Electrical characteristics (curves) Output characteristics Figure 2. Transfer characteristics Figure 3. Transconductance Figure 4. Collector-emitter on voltage vs temperature Figure 5. Gate charge vs gate-source voltage Figure 6. Capacitance variations 6/13 STGP19NC60W Figure 7. Normalized gate threshold voltage vs temperature Figure 8. Electrical characteristics Collector-emitter on voltage vs collector current Figure 9. Normalized breakdown voltage vs temperature Figure 10. Switching losses vs temperature Figure 11. Switching losses vs gate resistance Figure 12. Switching losses vs collector current 7/13 Electrical characteristics Figure 13. Turn-off SOA STGP19NC60W 8/13 STGP19NC60W Test circuit 3 Test circuit Figure 15. Gate charge test circuit Figure 14. Test circuit for inductive load switching Figure 16. Switching waveform 9/13 Package mechanical data STGP19NC60W 4 Package mechanical data In order to meet environmental requirements, ST offers these devices in ECOPACK® packages. These packages have a Lead-free second level interconnect . The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com 10/13 STGP19NC60W Package mechanical data TO-220 mechanical data mm Dim Min A b b1 c D D1 E e e1 F H1 J1 L L1 L20 L30 ∅P Q 4.40 0.61 1.14 0.49 15.25 1.27 10 2.40 4.95 1.23 6.20 2.40 13 3.50 16.40 28.90 3.75 2.65 3.85 2.95 0.147 0.104 10.40 2.70 5.15 1.32 6.60 2.72 14 3.93 0.393 0.094 0.194 0.048 0.244 0.094 0.511 0.137 Typ Max 4.60 0.88 1.70 0.70 15.75 Min 0.173 0.024 0.044 0.019 0.6 inch Typ Max 0.181 0.034 0.066 0.027 0.62 0.050 0.409 0.106 0.202 0.051 0.256 0.107 0.551 0.154 0.645 1.137 0.151 0.116 11/13 Revision history STGP19NC60W 5 Revision history Table 7. Date 04-Oct-2006 08-May-2007 Revision history Revision 1 2 Initial release. Modified vaule on Table 1 Changes 12/13 STGP19NC60W Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2007 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 13/13