HCF4051BEY

HCF4051 Single 8-channel analog multiplexer/demultiplexer Datasheet - production data • Input leakage current II = 100 nA (max.) at VDD = 18 V, TA = 25 °C • 100 % tested for quiescent current 3',3 Applications 62  • Automotive Features • Industrial • Low “ON” resistance: 125 Ω (typ.) • Computer • Over 15 V p.p signal-input range for VDD - VEE = 15 V • Consumer Description • High “OFF” resistance, channel leakage: ± 100 pA (typ.) at VDD - VEE = 18 V • Binary address decoding on chip • High degree of linearity: < 0.5 % distortion typ. at fIS = 1 KHz, VIS = 5 Vpp, VDD - VSS ≥ 10 V, RL = 10 kΩ • Very low quiescent power dissipation under all digital control input and supply conditions: 0.2 μW (typ.) VDD - VSS = VDD - VEE = 10 V • Matched switch characteristics: RON = 5 Ω (typ.) for VDD - VEE = 15 V • Wide range of digital and analog signal levels: digital 3 to 20, analog to 20 V p.p. • Quiescent current specified up to 20 V • 5 V, 10 V and 15 V parametric ratings • ESD performance – HBM: 2 kV – MM: 200 V – CDM: 750 V Order code The HCF4051 device is a monolithic integrated circuit fabricated in MOS (metal oxide semiconductor) technology available in SO-16 and PDIP-16 packages. The HCF4051 analog multiplexer/demultiplexer is a digitally controlled analog switch having low ON impedance and very low OFF leakage current. This multiplexer circuit dissipates extremely low quiescent power over the full VDD - VSS and VDD - VEE supply voltage range, independent of the logic state of the control signals. This device is a single 8-channel multiplexer having three binary control inputs, A, B, and C, and an inhibit input. The three binary signals select 1 of 8 channels to be turned on, and connect one of the 8 inputs to the output. When a logic “1” is present at the inhibit input terminal all channels are off. Table 1. Device summary Temperature range Package HCF4051M013TR -55/+125 °C SO-16 HCF4051YM013TR(1) -40/+125 °C SO16 (automotive version) HCF4051BEY -55/+125 °C PDIP-16 Packaging Tape and reel Tube Marking HCF4051 HCF4051Y HCF4051BE 1. Qualification and characterization according to AEC Q100 and Q003 or equivalent, advanced screening according to AEC Q001 and Q002 or equivalent. April 2013 This is information on a product in full production. DocID2053 Rev 3 1/15 www.st.com 15 Contents HCF4051 Contents 1 Pin information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 Functional description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 3 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 4 Package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 4.1 PDIP-16 (0.25) package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 4.2 SO-16 package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 5 Ordering information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 6 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 2/15 DocID2053 Rev 3 HCF4051 1 Pin information Pin information Figure 1. Pin connections (top view)    9''                ,1+   $ 9((   % 966   & &+$11(/6 ,1287 &20287,1 &+$11(/6 ,1287 &+$11(/6 ,1287 6 Table 2. Pin description Pin no. Symbol Name and function 11, 10, 9 A, B, C Binary control inputs 6 INH Inhibit inputs 13, 14, 15, 12, 1, 5, 2, 4 0 to 7 channel IN/OUT Independent inputs/outputs 3 COM OUT/IN Common output/input 7 VEE Supply voltage 8 VSS Negative supply voltage 16 VDD Positive supply voltage DocID2053 Rev 3 3/15 Functional description 2 HCF4051 Functional description Table 3. Truth table Input states “ON” channel (S) Inhibit C B A 0 0 0 0 0 0 0 0 1 1 0 0 1 0 2 0 0 1 1 3 0 1 0 0 4 0 1 0 1 5 0 1 1 0 6 0 1 1 1 7 1 X X X None Figure 2. Functional diagram &+$11(/6,1287 9''                  7* $ 7*  7* % %,1$5