L601-L603

L601-L603 L602-L604 DARLINGTON ARRAYS EIGHT DARLINGTONS PER PACKAGE OUTPUT CURRENT 400 mA PER DRIVER (500 mA PEAK) OUTPUT VOLTAGE 90 V (VCE (sus)) = 70 V) INTEGRAL SUPPRESSION DIODES FOR INDUCTIVE LOADS OUTPUTS CAN BE PARALLELED FOR HIGHER CURRENT TTL / CMOS / PMOS / DTL COMPATIBLE INPUTS INPUTS PINNED OPPOSITE OUTPUTS TO SIMPLIFY LAYOUT DIP-18 ORDER CODES : L601C L603C L602C L604C The four versions interface to all common logic families: DESCRIPTION The L601, L602, L603 and L604 are high voltage, high current darlington arrays each containing eight open collector darlington pairs with common emitters. Each channel is rated at 400 mA and can with stand peak currents of 500 mA. Suppression diodes are included for inductive load driving and the inputs are pinned opposite the outputs to simplify board layout. L601 L602 L603 L604 General purpose 14 - 25 V PMOS 5 V TTL 6 - 15 V CMOS These versatile devices are useful for driving a wide range of loads, including solenoids, relays DC motors, LED displays, filament lamps, thermal printheads and high power buffers. ABSOLUTE MAXIMUM RATINGS Symbol VCEX IC IC Vi Ii Ptot Top Parameter Collector Emitter Voltage (input open) Collector Current Collector Peak Current Input Voltage (for L602 L603 and L604) Input Current (for L601 only) Total Power Dissipation a Tamb = 25°C Operating Junction Temperature Value 90 0.4 0.5 30 25 1.8 -25 to 150 mA W °C Unit V A A October 1991 1/5 L601-L602-L603-L604 PIN CONNECTION (top view) SCHEMATIC DIAGRAMS L601 L602 L603 L604 2/5 L601-L602-L603-L604 THERMAL DATA Symbol Rth-j-amb Parameter Thermal resistance Junction-ambient Max Value 70 Unit °C/W ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) Symbol ICEX VCE (sat) Parameter Output Leakage Current Collector Emitter Saturation Voltage Test conditions VCE = 90 V IC = 300 mA IC = 200 mA IC = 100 mA VCE = 3 V VCE = 3V for L602 for L603 for L604 VCE = 90 V for L601 for L602 for L603 for L604 VR = 90 V IF = 300 mA 0.5 Vi to 0.5 Vo 0.5 Vi to 0.5 Vo 2 0.4 0.4 IB = 500 µA IB = µ A IB = 250 µA IC = 300 mA IC = 300 mA 11.5 2.5 5 IC = 25 µA 0.55 7 0.75 1 50 2.4 V V V V µA V µs µs V V V 1000 Min. Typ. Max. 10 2 1.7 1.2 Unit µA V V V - hFE Vi DC Forward Current Gain (L601 only) Minimum Input Voltage (ON condition) Vi Maximum Input Voltage (OFF condition) IR VF ton toff Clamp Diode Reverse Current Clamp Diode Forward Voltage Turn-on Delay Turn-off Delay 3/5 L601-L602-L603-L604 DIP18 PACKAGE MECHANICAL DATA DIM. MIN. a1 B b b1 D E e e3 F I L Z 3.3 1.27 1.59 8.5 2.54 20.32 7.1 3.93 0.130 0.050 0.063 0.254 1.39 0.46 0.25 23.24 0.335 0.100 0.800 0.280 0.155 1.65 mm TYP. MAX. MIN. 0.010 0.055 0.018 0.010 0.915 0.065 inch TYP. MAX. 4/5 L601-L602-L603-L604 Information furnished is believed to be accurate and reliable. However, SGS-THOMSON Microelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of SGS-THOMSON Microelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. SGS-THOMSON Microelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of SGS-THOMSON Microelectronics. © 1994 SGS-THOMSON Microelectronics - All Rights Reserved SGS-THOMSON Microelectronics GROUP OF COMPANIES Australia - Brazil - France - Germany - Hong Kong - Italy - Japan - Korea - Malaysia - Malta - Morocco - The Netherlands - Singapore Spain - Sweden - Switzerland - Taiwan - Thaliand - United Kingdom - U.S.A. 5/5