L7812AC

L7800AB/AC series Precision 1A regulators Feature summary ■ ■ ■ ■ ■ ■ Output current in excess of 1A Output voltages of 5; 6; 8; 9; 12; 15; 18; 20; 24V Thermal overload protection Output transition SOA protection 2% Output voltage tolerance Guaranteed in extended temperature range TO-220 TO-220FP Description The L7800A series of three terminal positive regulators is available in TO-220, TO-220FP, and D2PAK packages and several fixed output voltages, making it useful in a wide range of applications. These regulators can provide local on-card regulation, eliminating the distribution problem associated with single point regulation. Each type employs internal current limiting, thermal shut-down and safe area protection, making it essentially indestructible. If adequate heat sinking is provided, they can D2PAK deliver over 1A output current, Although designed primarily as fixed voltage regulators, these devices can be used with external components to obtain adjustable voltage and currents. Schematic diagram January 2007 Rev. 11 1/28 www.st.com 28 L7800AB/AC series Contents 1 2 3 4 5 Pin configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Maximum ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Test circuits ............................................... 5 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Application information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 5.1 Design consideration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 6 7 8 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Order code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 2/28 L7800AB/AC series Pin configuration 1 Figure 1. Pin configuration Pin connections (top view) TO-220 TO-220FP D2PAK Figure 2. Schematic diagram 3/28 Maximum ratings L7800AB/AC series 2 Table 1. Symbol VI IO PD TSTG TOP Maximum ratings Absolute maximum ratings Parameter DC Input voltage Output current Power dissipation Storage temperature range for L7800AC Operating junction temperature range for L7800AB -40 to 125 for VO= 5 to 18V for VO= 20, 24V Value 35 V 40 Internally Limited Internally Limited -65 to 150 0 to 150 °C mA mW °C Unit Note: Absolute Maximum Ratings are those values beyond which damage to the device may occur. Functional operation under these condition is not implied Thermal Data Parameter Thermal resistance junction-case Thermal resistance junction-ambient TO-220 3 50 TO-220FP 5 60 D2PAK 3 62.5 Unit °C/W °C/W Table 2. Symbol RthJC RthJA Figure 3. Application circuits 4/28 L7800AB/AC series Test circuits 3 Figure 4. Test circuits DC Parameter Figure 5. Load regulation Figure 6. Ripple rejection 5/28 Electrical characteristics L7800AB/AC series 4 Table 3. Symbol VO VO Electrical characteristics Electrical characteristics of L7805A (VI = 10V, IO=1A, TJ = 0 to 150°C (L7805AC), TJ = -40 to 125°C (L7805AB), unless otherwise specified) Parameter Output voltage Output voltage TJ = 25°C IO = 5mA to 1A, PO ≤ 15W VI = 7.5 to 20V VI = 7.5 to 25V, IO = 500 mA Test conditions Min. 4.9 4.8 Typ. 5 5 7 10 2 7 25 30 8 4.3 Max. 5.1 5.2 50 50 25 50 100 100 50 6 6 VI = 8 to 25V, IO = 500 mA ∆Iq Quiescent current change VI = 7.5 to 20V, TJ = 25°C IO = 5mA to 1A SVR Vd eN RO Isc Iscp Supply voltage rejection Dropout voltage Output noise voltage Output resistance Short circuit current Short circuit peak current Output voltage drift VI = 8 to 18V, f = 120Hz, IO = 500mA IO = 1A, TJ = 25°C TA = 25°C, B =10Hz to 100KHz f =1KHz VI = 35V, TA = 25°C TJ = 25°C 68 2 10 17 0.2 2.2 -1.1 0.8 0.8 0.5 Unit V V mV mV mV mV mV V V mA mA mA mA mA dB V µV/VO mΩ A A mV/°C ∆VO (1) Line regulation VI = 8 to 12V VI = 8 to 12V, TJ = 25°C VI = 7.3 to 20V, TJ = 25°C IO = 5mA to 1A ∆VO(*) Load regulation IO = 5mA to 1.5A, TJ = 25°C IO = 250 to 750mA Iq Quiescent current TJ = 25°C ∆VO/∆T 1. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account separately. Pulse testing with low duty cycle is used. 6/28 L7800AB/AC series Electrical characteristics Table 4. Symbol VO VO Electrical characteristics of L7806A (VI = 11V, IO=1A, TJ = 0 to 150°C (L7806AC), TJ = -40 to 125°C (L7806AB), unless otherwise specified) Parameter Output voltage Output voltage TJ = 25°C IO = 5mA to 1A, PO ≤ 15W VI = 8.6 to 21V VI = 8.6 to 25V, IO = 500 mA Test conditions Min. 5.88 5.76 Typ. 6 6 9 11 3 9 25 30 10 4.3 Max. 6.12 6.24 60 60 30 60 100 100 50 6 6 VI = 9 to 25V, IO = 500 mA 0.8 0.8 0.5 65 2 10 17 0.2 2.2 -0.8 Unit V V mV mV mV mV mV V V mA mA mA mA mA dB V µV/VO mΩ A A mV/°C ∆VO (1) Line regulation VI = 9 to 13V VI = 9 to 13V, TJ = 25°C VI = 8.3 to 21V, TJ = 25°C IO = 5mA to 1A ∆VO (1) Load regulation IO = 5mA to 1.5A, TJ = 25°C IO = 250 to 750mA Iq Quiescent current TJ = 25°C ∆Iq Quiescent current change VI = 8.6 to 21V, TJ = 25°C IO = 5mA to 1A SVR Vd eN RO Isc Iscp ∆VO/∆T Supply voltage rejection Dropout voltage Output noise voltage Output resistance Short circuit current Short circuit peak current Output voltage drift VI = 9 to 19V, f = 120Hz, IO = 500mA IO = 1A, TJ = 25°C TA = 25°C, B =10Hz to 100KHz f =1KHz VI = 35V, TA = 25°C TJ = 25°C 1. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account separately. Pulse testing with low duty cycle is used. 7/28 Electrical characteristics L7800AB/AC series Table 5. Symbol VO VO Electrical characteristics of L7808A (VI = 14V, IO=1A, TJ = 0 to 150°C (L7808AC), TJ = -40 to 125°C (L7808AB), unless otherwise specified) Parameter Output voltage Output voltage TJ = 25°C IO = 5mA to 1A, PO ≤ 15W VI = 10.6 to 23V VI = 10.6 to 25V, IO = 500 mA Test conditions Min. 7.84 7.7 Typ. 8 8 12 15 5 12 25 30 10 4.3 Max. 8.16 8.3 80 80 40 80 100 100 50 6 6 VI = 11 to 25V, IO = 500 mA 0.8 0.8 0.5 62 2 10 18 0.2 2.2 -0.8 Unit V V mV mV mV mV mV V V mA mA mA mA mA dB V µV/VO mΩ A A mV/°C ∆VO (1) Line regulation VI = 11 to 17V VI = 11 to 17V, TJ = 25°C VI = 10.4 to 23V, TJ = 25°C IO = 5mA to 1A ∆VO (1) Load regulation IO = 5mA to 1.5A, TJ = 25°C IO = 250 to 750mA Iq Quiescent current TJ = 25°C ∆Iq Quiescent current change VI = 10.6 to 23V, TJ = 25°C IO = 5mA to 1A SVR Vd eN RO Isc Iscp ∆VO/∆T Supply voltage rejection Dropout voltage Output noise voltage Output resistance Short circuit current Short circuit peak current Output voltage drift VI = 11.5 to 21.5V, f = 120Hz, IO = 500mA IO = 1A, TJ = 25°C TA = 25°C, B =10Hz to 100KHz f =1KHz VI = 35V, TA = 25°C TJ = 25°C 1. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account separately. Pulse testing with low duty cycle is used. 8/28 L7800AB/AC series Electrical characteristics Table 6. Symbol VO VO Electrical characteristics of L7809A (VI = 15V, IO=1A, TJ = 0 to 150°C (L7809AC), TJ = -40 to 125°C (L7809AB), unless otherwise specified) Parameter Output voltage Output voltage TJ = 25°C IO = 5mA to 1A, PO ≤ 15W VI = 10.6 to 23V VI = 10.6 to 25V, IO = 500 mA Test conditions Min. 8.82 8.65 Typ. 9 9 12 15 5 12 25 30 10 4.3 Max. 9.18 9.35 90 90 45 90 100 100 50 6 6 VI = 11 to 25V, IO = 500 mA 0.8 0.8 0.5 61 2 10 18 0.2 2.2 -0.8 Unit V V mV mV mV mV mV V V mA mA mA mA mA dB V µV/VO mΩ A A mV/°C ∆VO (1) Line regulation VI = 11 to 17V VI = 11 to 17V, TJ = 25°C VI = 10.4 to 23V, TJ = 25°C IO = 5mA to 1A ∆VO (1) Load regulation IO = 5mA to 1.5A, TJ = 25°C IO = 250 to 750mA Iq Quiescent current TJ = 25°C ∆Iq Quiescent current change VI = 10.6 to 23V, TJ = 25°C IO = 5mA to 1A SVR Vd eN RO Isc Iscp ∆VO/∆T Supply voltage rejection Dropout voltage Output noise voltage Output resistance Short circuit current Short circuit peak current Output voltage drift VI = 11.5 to 21.5V, f = 120Hz, IO = 500mA IO = 1A, TJ = 25°C TA = 25°C, B =10Hz to 100KHz f =1KHz VI = 35V, TA = 25°C TJ = 25°C 1. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account separately. Pulse testing with low duty cycle is used. 9/28 Electrical characteristics L7800AB/AC series Table 7. Symbol VO VO Electrical characteristics of L7812A (VI = 19V, IO=1A, TJ = 0 to 150°C (L7812AC), TJ = -40 to 125°C (L7812AB), unless otherwise specified) Parameter Output voltage Output voltage TJ = 25°C IO = 5mA to 1A, PO ≤ 15W VI = 14.8 to 27V VI = 14.8 to 30V, IO = 500 mA Test conditions Min. 11.75 11.5 Typ. 12 12 13 16 6 13 25 30 10 4.4 Max. 12.25 12.5 120 120 60 120 100 100 50 6 6 VI = 15 to 30V, IO = 500 mA 0.8 0.8 0.5 60 2 10 18 0.2 2.2 -1 Unit V V mV mV mV mV mV V V mA mA mA mA mA dB V µV/VO mΩ A A mV/°C ∆VO (1) Line regulation VI = 16 to 12V VI = 16 to 12V, TJ = 25°C VI = 14.5 to 27V, TJ = 25°C IO = 5mA to 1A ∆VO (1) Load regulation IO = 5mA to 1.5A, TJ = 25°C IO = 250 to 750mA Iq Quiescent current TJ = 25°C ∆Iq Quiescent current change VI = 14.8 to 27V, TJ = 25°C IO = 5mA to 1A SVR Vd eN RO Isc Iscp ∆VO/∆T Supply voltage rejection Dropout voltage Output noise voltage Output resistance Short circuit current Short circuit peak current Output voltage drift VI = 15 to 25V, f = 120Hz, IO = 500mA IO = 1A, TJ = 25°C TA = 25°C, B =10Hz to 100KHz f =1KHz VI = 35V, TA = 25°C TJ = 25°C 1. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account separately. Pulse testing with low duty cycle is used. 10/28 L7800AB/AC series Electrical characteristics Table 8. Symbol VO VO Electrical characteristics of L7815A (VI = 23V, IO=1A, TJ = 0 to 150°C (L7815AC), TJ = -40 to 125°C (L7815AB), unless otherwise specified) Parameter Output voltage Output voltage TJ = 25°C IO = 5mA to 1A, PO ≤ 15W VI = 17.9 to 30V VI = 17.9 to 30V, IO = 500 mA Test conditions Min. 14.7 14.4 Typ. 15 15 13 16 6 13 25 30 10 4.4 Max. 15.3 15.6 150 150 75 150 100 100 50 6 6 VI = 17.5 to 30V, IO = 500 mA 0.8 0.8 0.5 58 2 10 19 0.2 2.2 -1 Unit V V mV mV mV mV mV V V mA mA mA mA mA dB V µV/VO mΩ A A mV/°C ∆VO (1) Line regulation VI = 20 to 26V VI = 20 to 26V, TJ = 25°C VI = 17.5 to 30V, TJ = 25°C IO = 5mA to 1A ∆VO (1) Load regulation IO = 5mA to 1.5A, TJ = 25°C IO = 250 to 750mA Iq Quiescent current TJ = 25°C ∆Iq Quiescent current change VI = 17.5 to 30V, TJ = 25°C IO = 5mA to 1A SVR Vd eN RO Isc Iscp ∆VO/∆T Supply voltage rejection Dropout voltage Output noise voltage Output resistance Short circuit current Short circuit peak current Output voltage drift VI = 18.5 to 28.5V, f = 120Hz, IO = 500mA IO = 1A, TJ = 25°C TA = 25°C, B =10Hz to 100KHz f =1KHz VI = 35V, TA = 25°C TJ = 25°C 1. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account separately. Pulse testing with low duty cycle is used. 11/28 Electrical characteristics L7800AB/AC series Table 9. Symbol VO VO Electrical characteristics of L7818A (VI = 27V, IO=1A, TJ = 0 to 150°C (L7818AC), TJ = -40 to 125°C (L7818AB), unless otherwise specified) Parameter Output voltage Output voltage TJ = 25°C IO = 5mA to 1A, PO ≤ 15W VI = 21 to 33V VI = 21 to 33V, IO = 500 mA Test conditions Min. 17.64 17.3 Typ. 18 18 25 28 10 5 25 30 10 4.5 Max. 18.36 18.7 180 180 90 180 100 100 50 6 6 VI = 21 to 33V, IO = 500 mA 0.8 0.8 0.5 57 2 10 19 0.2 2.2 -1 Unit V V mV mV mV mV mV V V mA mA mA mA mA dB V µV/VO mΩ A A mV/°C ∆VO (1) Line regulation VI = 24 to 30V VI = 24 to 30V, TJ = 25°C VI = 20.6 to 33V, TJ = 25°C IO = 5mA to 1A ∆VO (1) Load regulation IO = 5mA to 1.5A, TJ = 25°C IO = 250 to 750mA Iq Quiescent current TJ = 25°C ∆Iq Quiescent current change VI = 21 to 33V, TJ = 25°C IO = 5mA to 1A SVR Vd eN RO Isc Iscp ∆VO/∆T Supply voltage rejection Dropout voltage Output noise voltage Output resistance Short circuit current Short circuit peak current Output voltage drift VI = 22 to 32V, f = 120Hz, IO = 500mA IO = 1A, TJ = 25°C TA = 25°C, B =10Hz to 100KHz f =1KHz VI = 35V, TA = 25°C TJ = 25°C 1. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account separately. Pulse testing with low duty cycle is used. 12/28 L7800AB/AC series Electrical characteristics Table 10. Symbol VO VO Electrical characteristics of L7820A (VI = 28V, IO=1A, TJ = 0 to 150°C (L7820AC), TJ = -40 to 125°C (L7820AB), unless otherwise specified) Parameter Output voltage Output voltage TJ = 25°C IO = 5mA to 1A, PO ≤ 15W VI = 23 to 35V VI = 23 to 35V, IO = 500 mA Test conditions Min. 19.6 19.2 Typ. 20 20 Max. 20.4 20.8 200 200 100 200 25 30 10 4.5 100 100 50 6 6 VI = 23 to 35V, IO = 500 mA 0.8 0.8 0.5 56 2 10 20 0.2 2.2 -1 Unit V V mV mV mV mV mV V V mA mA mA mA mA dB V µV/VO mΩ A A mV/°C ∆VO (1) Line regulation VI = 26 to 32V VI = 26 to 32V, TJ = 25°C VI = 23 to 32V, TJ = 25°C IO = 5mA to 1A ∆VO (1) Load regulation IO = 5mA to 1.5A, TJ = 25°C IO = 250 to 750mA Iq Quiescent current TJ = 25°C ∆Iq Quiescent current change VI = 23 to 35V, TJ = 25°C IO = 5mA to 1A SVR Vd eN RO Isc Iscp ∆VO/∆T Supply voltage rejection Dropout voltage Output noise voltage Output resistance Short circuit current Short circuit peak current Output voltage drift VI = 24 to 35V, f = 120Hz, IO = 500mA IO = 1A, TJ = 25°C TA = 25°C, B =10Hz to 100KHz f =1KHz VI = 35V, TA = 25°C TJ = 25°C 1. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account separately. Pulse testing with low duty cycle is used. 13/28 Electrical characteristics L7800AB/AC series Table 11. Symbol VO VO Electrical characteristics of L7824A (VI = 33V, IO=1A, TJ = 0 to 150°C (L7824AC), TJ = -40 to 125°C (L7824AB), unless otherwise specified) Parameter Output voltage Output voltage TJ = 25°C IO = 5mA to 1A, PO ≤ 15W VI = 27.3 to 38V VI = 27 to 38V, IO = 500 mA Test conditions Min. 19.6 19.2 Typ. 20 20 Max. 20.4 20.8 200 200 100 200 25 30 10 4.5 100 100 50 6 6 VI = 27.3 to 38V, IO = 500 mA 0.8 0.8 0.5 56 2 10 20 0.2 2.2 -1 Unit V V mV mV mV mV mV V V mA mA mA mA mA dB V µV/VO mΩ A A mV/°C ∆VO (1) Line regulation VI = 30 to 36V VI = 30 to 36V, TJ = 25°C VI = 26.7 to 38V, TJ = 25°C IO = 5mA to 1A ∆VO (1) Load regulation IO = 5mA to 1.5A, TJ = 25°C IO = 250 to 750mA Iq Quiescent current TJ = 25°C ∆Iq Quiescent current change VI = 27.3 to 38V, TJ = 25°C IO = 5mA to 1A SVR Vd eN RO Isc Iscp ∆VO/∆T Supply voltage rejection Dropout voltage Output noise voltage Output resistance Short circuit current Short circuit peak current Output voltage drift VI = 28 to 38V, f = 120Hz, IO = 500mA IO = 1A, TJ = 25°C TA = 25°C, B =10Hz to 100KHz f =1KHz VI = 35V, TA = 25°C TJ = 25°C 1. Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account separately. Pulse testing with low duty cycle is used. 14/28 L7800AB/AC series Application information 5 5.1 Application information Design consideration The L7800A Series of fixed voltage regulators are designed with Thermal Overload Protection that shuts down the circuit when subjected to an excessive power overload condition, Internal Short-circuit Protection that limits the maximum current the circuit will pass, and Output transistor Safe-Area Compensation that reduces the output short-circuit current as the voltage across the pass transistor is increased. In many low current applications, compensation capacitors are not required. However, it is recommended that the regulator input be bypassed with capacitor if the regulator is connected to the power supply filter with long lengths, or if the output load capacitance is large. An input bypass capacitor should be selected to provide good high frequency characteristics to insure stable operation under all load conditions. A 0.33µF or larger tantalum, mylar or other capacitor having low internal impedance at high frequencies should be chosen. The bypass capacitor should be mounted with the shortest possible leads directly across the regulators input terminals. Normally good construction techniques should be used to minimize ground loops and lead resistance drops since the regulator has no external sense lead. The addition of an operational amplifier allows adjustment to higher or intermediate values while retaining regulation characteristics. The minimum voltage obtained with the arrangement is 2V greater than the regulator voltage. The circuit of figure 6 can be modified to provide supply protection against short circuit by adding a short circuit sense resistor, RSC, and an additional PNP transistor. The current sensing PNP must be able to handle the short circuit current of the three terminal regulator Therefore a four ampere plastic power transistor is specified. Figure 7. DC Parameter IO = VXX/R1+Id 15/28 Application information L7800AB/AC series Figure 8. DC Parameter VO = 7 to 20V VI - VO ≥ 2V Figure 9. DC Parameter VBEQ1 R1 = ______________ IREQ-(IQ1/βQ1) VBEQ1 IO = IREG + Q1 (IREG ______) R1 . 16/28 L7800AB/AC series Figure 10. DC Parameter Application information 17/28 Package mechanical data L7800AB/AC series 6 Package mechanical data In order to meet environmental requirements, ST offers these devices in ECOPACK® packages. These packages have a Lead-free second level interconnect. The category of second Level Interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com. 18/28 L7800AB/AC series Package mechanical data TO-220 MECHANICAL DATA DIM. A C D D1 E F F1 F2 G G1 H2 L2 L4 L5 L6 L7 L9 DIA. 13.0 2.65 15.25 6.2 3.5 3.75 0.49 0.61 1.14 1.14 4.95 2.4 10.0 16.4 14.0 2.95 15.75 6.6 3.93 3.85 0.511 0.104 0.600 0.244 0.137 0.147 mm. MIN. 4.40 1.23 2.40 1.27 0.70 0.88 1.70 1.70 5.15 2.7 10.40 0.019 0.024 0.044 0.044 0.194 0.094 0.393 0.645 0.551 0.116 0.620 0.260 0.154 0.151 TYP MAX. 4.60 1.32 2.72 MIN. 0.173 0.048 0.094 0.050 0.027 0.034 0.067 0.067 0.203 0.106 0.409 inch TYP. MAX. 0.181 0.051 0.107 P011C 19/28 Package mechanical data L7800AB/AC series TO-220FP MECHANICAL DATA DIM. A B D E F F1 F2 G G1 H L2 L3 L4 L5 L6 L7 DIA. 28.6 9.8 2.9 15.9 9 3 mm. MIN. 4.40 2.5 2.5 0.45 0.75 1.15 1.15 4.95 2.4 10.0 16 30.6 10.6 3.6 16.4 9.3 3.2 1.126 0.385 0.114 0.626 0.354 0.118 TYP MAX. 4.60 2.7 2.75 0.70 1 1.50 1.50 5.2 2.7 10.40 MIN. 0.173 0.098 0.098 0.017 0.030 0.045 0.045 0.194 0.094 0.393 0.630 1.204 0.417 0.142 0.645 0.366 0.126 inch TYP. MAX. 0.181 0.106 0.108 0.027 0.039 0.059 0.059 0.204 0.106 0.409 7012510A-H 20/28 L7800AB/AC series Package mechanical data Figure 11. DRAWING DIMENSION D2PAK (TYPE STD-ST) 0079457/L 21/28 Package mechanical data L7800AB/AC series Figure 12. DRAWING DIMENSION D2PAK (TYPE WOOSEOK-SUBCON.) 0079457/L 22/28 L7800AB/AC series Package mechanical data Table 12. D2PAK MECHANICAL DATA TYPE STD-ST TYPE WOOSEOK-SUBCON. mm. MAX. 4.60 0.23 0.93 1.70 0.60 1.36 9.35 MIN. 4.30 0 0.70 1.17 0.45 1.25 9 7.50 10.40 9.80 7.50 2.54 4.88 15 2.49 2.29 1.27 1.30 0.4 0° 8° 0° 5.28 15.85 2.69 2.79 1.40 1.75 15 2.20 1.79 1 1.20 0.30 3° 2.54 5.08 15.30 15.60 2.60 2.79 1.40 1.60 10.20 0.50 1.30 9.20 TYP. MAX. 4.70 0.20 0.90 1.37 0.60 1.40 9.40 DIM. MIN. A A1 b b2 c c2 D D1 E E1 e e1 H J1 L L1 L2 R V2 4.40 0.03 0.70 1.14 0.45 1.23 8.95 7.50 10 8.50 mm. TYP. Note: The D2PAK package coming from the subcontractor Wooseok is fully compatible with the ST's package suggested footprint. 23/28 Package mechanical data L7800AB/AC series Figure 13. D2PAK FOOTPRINT RECOMMENDED DATA Table 13. FOOTPRINT DATA VALUES mm. A B C D E F G 12.20 9.75 16.90 3.50 1.60 2.54 5.08 inch. 0.480 0.384 0.665 0.138 0.063 0.100 0.200 24/28 L7800AB/AC series Package mechanical data Tape & Reel D2PAK-P 2PAK-D 2PAK/A-P 2PAK/A MECHANICAL DATA mm. DIM. MIN. A C D N T Ao Bo Ko Po P 10.50 15.70 4.80 3.9 11.9 10.6 15.80 4.90 4.0 12.0 12.8 20.2 60 14.4 10.70 15.90 5.00 4.1 12.1 0.413 0.618 0.189 0.153 0.468 0.417 0.622 0.193 0.157 0.472 13.0 TYP MAX. 180 13.2 0.504 0.795 2.362 0.567 0.421 0.626 0.197 0.161 0.476 0.512 MIN. TYP. MAX. 7.086 0.519 inch 25/28 Order code L7800AB/AC series 7 Table 14. Order code Order code Packaging Part numbers TO-220 L7805AB L7805AC L7806AB L7806AC L7808AB L7808AC L7809AB L7809AC L7812AB L7812AC L7815AB L7815AC L7818AB L7818AC L7820AB L7820AC L7824AB L7824AC L7805ABV L7805ACV L7806ABV L7806ACV L7808ABV L7808ACV L7809ABV L7809ACV L7812ABV L7812ACV L7815ABV L7815ACV L7818ABV L7818ACV L7820ABV (1) TO-220FP L7805ABP L7805ACP L7806ABP L7806ACP (1) (1) D2PAK L7805ABD2T-TR L7805ACD2T-TR L7806ABD2T-TR L7806ACD2T-TR L7808ABD2T-TR L7808ACD2T-TR L7809ABD2T-TR L7809ACD2T-TR L7812ABD2T-TR L7812ACD2T-TR L7815ABD2T-TR L7815ACD2T-TR L7818ABD2T-TR (1) L7818ACD2T-TR L7820ABD2T-TR L7820ACD2T-TR (1) (1) (1) Output voltage 5V 5V 6V 6V 8V 8V 9V 9V 12 V 12 V 15 V 15 V 18 V 18 V 20 V 20 V 24 V 24 V L7808ABP L7808ACP L7809ABP L7809ACP L7812ABP(1) L7812ACP L7815ABP L7815ACP (1) L7818ABP L7818ACP L7820ABP L7820ACP (1) (1) (1) L7820ACV L7824ABV L7824ACV L7824ABP L7824ACP (1) L7824ABD2T-TR (1) L7824ACD2T-TR (1) 1. Available on request. 26/28 L7800AB/AC series Revision history 8 Table 15. Date Revision history Revision history Revision 9 10 11 Document updating. Order Codes has been updated and new template. D2PAK mechanical data has been updated and add footprint data. Changes 21-Jun-2004 04-Aug-2006 19-Jan-2007 27/28 L7800AB/AC series Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2007 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 28/28