LMV82x, LMV82xA
Low power, high accuracy, general-purpose operational amplifier
Datasheet — production data
Features
• Low power consumption: 400 µA max at 5 V
• Low power shutdown mode: 50 nA max
SC70-5
SOT23-5 / SOT23-6
• Low offset voltage: 0.8 mV max at 25°C
• Tiny packages
• Extended temperature range: -40°C to +125°C
DFN8 2x2
• Low supply voltage: 2.5 V - 5.5 V
MiniSO8 / MiniSO10
• Gain bandwidth product: 5.5 MHz
• Automotive qualification
Benefits
TSSOP14
• Longer lifetime in battery-powered applications
TSSOP16
• Higher accuracy without calibration
• Smaller form factor than equivalent competitor
devices
• Application performances guaranteed over
wide temperature range
Related products
SO8
product (5.5 MHz). The LMV821, LMV822 and
LMV824 are offered with standard pinouts.
• See TSV85x series for lower power
consumption (180 µA max at 5 V)
The LMV820, LMV823, and LMV825 include a
power-saving shutdown feature that reduces the
supply current to a maximum of 50 nA at 25 °C.
Applications
• Battery-powered applications
The wide temperature range, high ESD tolerance,
and automotive grade qualification make them
particularly suitable for use in harsh automotive
applications.
• Portable devices
• Automotive signal conditioning
• Active filtering
Table 1. Device summary
• Medical instrumentation
Without shutdown
Description
The LMV82x and LMV82xA series of single, dual,
and quad operational amplifiers offer low voltage
operation with rail-to-rail output swing. They
outperform the industry standard LMV321,
especially with regard to the gain bandwidth
April 2017
This is information on a product in full production.
SO14
With shutdown
Standard Enhanced Standard Enhanced
Vio
Vio
Vio
Vio
Single
LMV821 LMV821A
LMV820
LMV820A
Dual
LMV822 LMV822A
LMV823
LMV823A
Quad
LMV824 LMV824A
LMV825
LMV825A
DocID022467 Rev 4
1/32
www.st.com
Contents
LMV82x, LMV82xA
Contents
1
Package pin connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2
Absolute maximum ratings and operating conditions . . . . . . . . . . . . . 4
3
Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
4
Application information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
5
4.1
Operating voltages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
4.2
Input common mode range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
4.3
Rail-to-rail output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
4.4
Input offset voltage drift over temperature . . . . . . . . . . . . . . . . . . . . . . . . 16
4.5
PCB layouts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
4.6
Macromodel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
4.7
Shutdown function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
5.1
SC70-5 (or SOT323-5) package information . . . . . . . . . . . . . . . . . . . . . . 19
5.2
SOT23-5 package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
5.3
SOT23-6 package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
5.4
DFN8 2 x 2 mm package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
5.5
MiniSO-8 package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
5.6
MiniSO-10 package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
5.7
TSSOP14 package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
5.8
TSSOP16 package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
5.9
SO-8 package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
5.10
SO-14 package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
6
Ordering information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
7
Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
2/32
DocID022467 Rev 4
LMV82x, LMV82xA
1
Package pin connections
Package pin connections
Figure 1. Pin connections for each package (top view)
,1
9&&
9&&
6+'1
,1
287
SC70-5 / SOT23-5
287
,1
,1
9&&
SOT23-6
9&&
287
9&&
287
,1
287
,1
,1
,1
,1
9&&
,1
1&
DFN8 2x2(1)
MiniSO8
287
9&&
,1
287
,1
,1
9&&
,1
6+'1
6+'1
MiniSO10
287
287
,1
,1
,1
,1
9&&
9&&
,1
,1
,1
,1
287
287
6+'1
TSSOP14 / SO14
6+'1
TSSOP16
1. The exposed pad of DFN8 2x2 can be connected to VCC- or left floating.
DocID022467 Rev 4
3/32
32
Absolute maximum ratings and operating conditions
2
LMV82x, LMV82xA
Absolute maximum ratings and operating conditions
Table 2. Absolute maximum ratings (AMR)
Symbol
Vcc
Vid
Vin
Iin
SHDN
Tstg
Parameter
Supply voltage
Differential input voltage
±Vcc
(3)
Input pins (IN+ and IN- pins) voltage
Input current
Tj
(5)
Shutdown voltage
Storage temperature
10
mA
Vcc- - 0.2 to Vcc+ + 0.2
V
-65 to +150
°C
ambient(6)(7)
– SC70-5
205
– SOT23-5
250
– DFN8 2x2
57
– MiniSO8
190
– SO8
125
– TSSOP14
100
– SO14
105
– SOT23-6
240
– MiniSO10
113
– TSSOP16
95
Maximum junction temperature
HBM: human body model (shutdown
pin)(8)
4
3.5
250
model(10)
CDM: charged device model
°C/W
150
pin)(8)
MM: machine model(9)
CDM: charged device
V
Vcc- - 0.3 to Vcc+ + 0.3
(4)
HBM: human body model (except shutdown
ESD
Unit
6
(2)
Thermal resistance junction to
Rthja
Value
(1)
LMV825(10)
Latch-up immunity
1.3
1
200
°C
kV
V
kV
mA
1. All voltage values, except the differential voltage are with respect to the network ground terminal.
2. Differential voltages are the non-inverting input terminal with respect to the inverting input terminal.
3. Vcc-Vin must not exceed 6 V, Vin must not exceed 6 V.
4. The input current must be limited by a resistor in series with the inputs.
5. Vcc-Vshdn must not exceed 6 V, Vin must not exceed 6 V.
6. Short-circuits can cause excessive heating and destructive dissipation.
7. Rth are typical values.
8. Human body model: a 100 pF capacitor is discharged through a 1.5 kΩ resistor between two pins of the
device. This is done for all couples of pin combinations while other pins are floating.
9. Machine model: a 200 pF capacitor is charged to the specified voltage, then discharged directly between
two pins of the device with no external series resistor (internal resistor < 5 Ω). This is done for all couples of
pin combinations while other pins are floating.
10. Charged device model: all pins and package are charged together to the specified voltage and then
discharged directly to ground.
4/32
DocID022467 Rev 4
LMV82x, LMV82xA
Absolute maximum ratings and operating conditions
Table 3. Operating conditions
Symbol
Parameter
Vcc
Supply voltage
Vicm
Common mode input voltage range
Toper
Operating free air temperature range
Value
2.5 to 5.5
DocID022467 Rev 4
Vcc- - 0.2 to Vcc+ - 1
-40 to +125
Unit
V
°C
5/32
32
Electrical characteristics
3
LMV82x, LMV82xA
Electrical characteristics
Table 4. Electrical characteristics at Vcc+ = 2.5 V with Vcc- = 0 V, Vicm = Vcc/2, Tamb = 25° C, and RL
connected to Vcc/2 (unless otherwise specified)
Symbol
Parameter
Conditions
Min.
Typ.
Max.
Unit
DC performance
Vio
VCC-VOH
VOL
LMV82xA
0.8
LMV82x
3.5
Input offset voltage
High level output voltage
Low level output voltage
Isink (Vout = Vcc)
Vid = -1 V
LMV82xA, -40 °C < T< 125 °C
2
LMV82x, -40 °C < T< 125 °C
4
RL = 600 Ω
220
RL = 600 Ω, -40 °C < T< 125 °C
320
RL = 2 kΩ
120
RL = 2 kΩ, -40 °C < T< 125 °C
220
RL = 600 Ω
220
RL = 600 Ω, -40 °C < T< 125 °C
320
RL = 2 kΩ
120
RL = 2 kΩ, -40 °C < T< 125 °C
200
5
-40 °C < T< 125 °C
5
mA
Iout
Isource (Vout = 0 V)
Vid = 1 V
6/32
mV
5
-40 °C < T< 125 °C
DocID022467 Rev 4
5
LMV82x, LMV82xA
Electrical characteristics
Table 5. Shutdown characteristics VCC = 2.5 V
Symbol
Parameter
Conditions
Min.
Typ.
Max.
2.5
50
Unit
DC performance
ICC
Supply current in shutdown
mode (all operators)
SHDN = VCC-
T = 25 °C
nA
-40°C < T< 85 °C
200
-40°C < T< 125 °C
1.5
ton
Amplifier turn-on time(1)
RL = 2 kΩ,
Vout = VCC- to VCC - + 0.2 V
300
toff
Amplifier turn-off time(1)
RL = 2 kΩ, Vout = VCC+ - 1 V to
VCC+ - 1.2 V
20
VIH
SHDN logic high
VIL
SHDN logic low
IIH
SHDN current high
SHDN = VCC+
10
IIL
SHDN current low
SHDN = VCC-
10
Output leakage in shutdown
mode
SHDN = VCC-
50
-40°C < T< 125°C
1
IOLeak
µA
ns
Vcc-0.5
V
0.5
pA
nA
1. See Section 4.7: Shutdown function on page 17.
DocID022467 Rev 4
7/32
32
Electrical characteristics
LMV82x, LMV82xA
Table 6. Electrical characteristics at Vcc+ = 2.7 V with Vcc- = 0 V, Vicm = Vcc/2, Tamb = 25° C, and RL
connected to Vcc/2 (unless otherwise specified)
Symbol
Parameter
Conditions
Min.
Typ.
Max.
Unit
DC performance
Vio
ΔVio/ΔT
Iio
LMV82xA
0.8
LMV82x
3.5
Input offset voltage
mV
(1)
Input offset voltage drift
Input offset current
(Vout = Vcc/2)
LMV82xA, -40 °C < T< 125 °C
2
LMV82x, -40 °C < T< 125 °C
4
-40 °C < T< 125 °C
μV/°C
1
-40 °C < T< 125 °C
0.5
30
1
50
60
120
nA
Iib
CMR
Avd
Input bias current (Vout = Vcc/2)
Common mode rejection ratio
20 log (ΔVicm/ΔVio)
Vic = 0 V to Vcc-1V, Vout = Vcc/2 -40 °C < T< 125 °C
Large signal voltage gain
Vout = 0.5V to (Vcc-0.5V)
VCC-VOH High level output voltage
VOL
-40 °C < T< 125 °C
Low level output voltage
Isink (Vout = Vcc)
Vid = -1 V
75
68
90
RL = 600 Ω, -40 °C < T< 125 °C
85
RL = 2 kΩ
95
RL = 2 kΩ, -40 °C < T< 125 °C
90
100
dB
100
RL = 600 Ω
200
RL = 600 Ω, -40 °C < T< 125 °C
300
RL = 2 kΩ
100
RL = 2 kΩ, -40 °C < T< 125 °C
200
RL = 600 Ω
200
RL = 600 Ω, -40 °C < T< 125 °C
300
RL = 2 kΩ
120
RL = 2 kΩ, -40 °C < T< 125 °C
200
mV
15
-40 °C < T< 125 °C
26
12
mA
Isource (Vout = 0 V)
Vid = 1 V
8/32
70
RL = 600 Ω
Iout
ICC
180
Supply current (per channel)
No load, Vout = Vcc/2
15
-40 °C < T< 125 °C
21
12
220
300
µA
-40 °C < T< 125 °C
DocID022467 Rev 4
500
LMV82x, LMV82xA
Electrical characteristics
Table 6. Electrical characteristics at Vcc+ = 2.7 V with Vcc- = 0 V, Vicm = Vcc/2, Tamb = 25° C, and RL
connected to Vcc/2 (unless otherwise specified) (continued)
Symbol
Parameter
Conditions
Min.
Typ.
Max.
Unit
AC performance
GBP
Gain bandwidth product
5.5
Fu
Unity gain frequency
4.5
Φm
Phase margin
Gm
Gain margin
SR
Slew rate
RL > 1 MΩ, CL = 22 pF,
Vout = 0.5 V to VCC - 0.5V
en
Equivalent input noise voltage
in
MHz
THD+N
RL > 1 MΩ, CL = 22 pF
60
degrees
10
dB
1.7
V/μs
f = 1 kHz
f = 10 kHz
18
15
nV
-----------Hz
Equivalent input noise current
f = 1 kHz
0.30
-----------Hz
Total harmonic distortion +
noise
fin = 1 kHz, ACL = 1, RL = 100 kΩ
Vicm = Vcc/2, BW = 22 kHz,
Vout = 3 Vpp
0.001
%
1.2
pA
Table 7. Shutdown characteristics VCC = 2.7 V
Symbol
Parameter
Conditions
Min.
Typ.
Max.
2.5
50
Unit
DC performance
SHDN = VCCICC
Supply current in shutdown
mode (all operators)
nA
-40°C < T< 85°C
200
-40°C < T< 125°C
1.5
RL = 2 kΩ,
Vout = VCC- to VCC - + 0.2 V
300
RL = 2 kΩ, Vout = VCC+ - 1 V to
VCC+ - 1.2 V
20
ton
Amplifier turn-on time(1)
toff
Amplifier turn-off
time(1)
VIH
SHDN logic high
VIL
SHDN logic low
IIH
SHDN current high
SHDN = VCC+
10
IIL
SHDN current low
SHDN = VCC-
10
Output leakage in shutdown
mode
SHDN = VCC-
50
-40°C < T< 125°C
1
IOLeak
µA
ns
Vcc0.5
V
0.5
pA
nA
1. See Section 4.7: Shutdown function on page 17.
DocID022467 Rev 4
9/32
32
Electrical characteristics
LMV82x, LMV82xA
Table 8. Electrical characteristics at Vcc+ = 5 V with Vcc- = 0 V, Vicm = Vcc/2, Tamb = 25° C, and RL
connected to Vcc/2 (unless otherwise specified)
Symbol
Parameter
Conditions
Min.
Typ.
Max.
Unit
DC performance
Vio
ΔVio/ΔT
Iio
LMV82xA
0.8
LMV82x
3.5
Input offset voltage
Input offset voltage drift
mV
(1)
Input offset current (Vout = Vcc/2)
LMV82xA, -40 °C < T< 125 °C
2
LMV82x, -40 °C < T< 125 °C
4
-40 °C < T< 125 °C
μV/°C
1
-40 °C < T< 125 °C
0.5
30
1
50
60
120
nA
Iib
CMR
Input bias current (Vout = Vcc/2)
Common mode rejection ratio 20
log (ΔVicm/ΔVio)
Vic = 0 V to Vcc-1V, Vout = Vcc/
-40 °C < T< 125 °C
180
72
-40 °C < T< 125 °C
90
70
Vcc = 2.5 to 5 V
SVR
Avd
VCC-VOH
VOL
Supply voltage rejection ratio 20
log (ΔVcc/ΔVio)
Large signal voltage gain
Vout = 0.5V to (Vcc-0.5V)
High level output voltage
Low level output voltage
Isink (Vout = Vcc)
Vid = -1 V
70
-40 °C < T< 125 °C
65
RL = 600 Ω
95
RL = 600 Ω, -40 °C < T< 125 °C
90
RL = 2 kΩ
95
RL = 2 kΩ, -40 °C < T< 125 °C
90
100
100
250
RL = 600 Ω, -40 °C < T< 125 °C
400
RL = 2 kΩ
150
RL = 2 kΩ, -40 °C < T< 125 °C
200
RL = 600 Ω
250
RL = 600 Ω, -40 °C < T< 125 °C
300
RL = 2 kΩ
150
RL = 2 kΩ, -40 °C < T< 125 °C
200
mV
35
-40 °C < T< 125 °C
43
25
mA
Isource (Vout = 0 V)
Vid = 1 V
10/32
dB
RL = 600 Ω
Iout
ICC
75
Supply current (per channel)
No load, Vout = Vcc/2
60
-40 °C < T< 125 °C
70
50
300
400
µA
-40°C < T< 125°C
DocID022467 Rev 4
600
LMV82x, LMV82xA
Electrical characteristics
Table 8. Electrical characteristics at Vcc+ = 5 V with Vcc- = 0 V, Vicm = Vcc/2, Tamb = 25° C, and RL
connected to Vcc/2 (unless otherwise specified) (continued)
Symbol
Parameter
Conditions
Min.
Typ.
Max.
Unit
AC performance
Gain bandwidth product
5.5
Fu
Unity gain frequency
4.5
Φm
Phase margin
Gm
Gain margin
SR
Slew rate
RL > 1 MΩ, CL = 22 pF,
Vout = 0.5 V to VCC - 0.5 V
en
Equivalent input noise voltage
in
GBP
MHz
THD+N
RL > 1 MΩ, CL = 22 pF
60
degree
s
10
dB
1.9
V/μs
f = 1 kHz
f = 10 kHz
16
13
nV
-----------Hz
Equivalent input noise current
f = 1 kHz
0.30
-----------Hz
Total harmonic distortion + noise
fin = 1 kHz, ACL = 1,
RL = 100 kΩ,
Vicm = Vcc/2, BW = 22 kHz,
Vout = 3 Vpp
0.001
%
1.4
pA
1. See Section 4.4: Input offset voltage drift over temperature.
Table 9. Shutdown characteristics VCC = 5 V
Symbol
Parameter
Conditions
Min.
Typ.
Max.
2.5
50
Unit
DC performance
ICC
Supply current in shutdown
mode (all operators)
SHDN = VCC-
T= 25°C
-40°C < T< 85°C
200
-40°C < T< 125°C
1.5
ton
Amplifier turn-on time(1)
RL = 2 kΩ,
Vout = VCC- to VCC - + 0.2 V
300
toff
Amplifier turn-off time(1)
RL = 2 kΩ, Vout = VCC+ - 1 V to
VCC+ - 1.2 V
20
VIH
SHDN logic high
VIL
SHDN logic low
IIH
SHDN current high
SHDN = VCC+
10
IIL
SHDN current low
SHDN = VCC-
10
Output leakage in shutdown
mode
SHDN = VCC-
50
-40°C < T< 125°C
1
IOLeak
nA
µA
ns
Vcc0.5
V
0.5
pA
nA
1. See Section 4.7: Shutdown function on page 17.
DocID022467 Rev 4
11/32
32
Electrical characteristics
LMV82x, LMV82xA
Figure 3. Supply current vs. Vicm at
VCC = 5 V
0.35
1.2
0.30
1.0
Supply Current (mA)
Supply Current (mA)
Figure 2. Supply current vs. supply voltage at
Vicm = VCC/2
0.25
0.20
T=25°C
T=125°C
0.15
T=-40°C
0.10
0.05
3.0
3.5
4.0
4.5
Supply Voltage (V)
5.0
0.6
T=-40°C
0.4
Vcc=5V
Follower configuration
0.0
0.5
1.0
1.5
2.0
2.5
3.0
Input Common Mode Voltage (V)
3.5
4.0
Figure 5. Input offset voltage vs. input common
mode voltage at VCC = 5 V
30
0.30
Input Offset Voltage (mV)
Vcc=5V
Vicm=2.5V
T=25°C
20
Population (%)
T=125°C
0.0
5.5
Figure 4. Vio distribution at VCC = 5 V
25
0.8
0.2
Vicm=2.5V
0.00
2.5
T=25°C
15
10
0.25
T=-40°C
T=25°C
0.20
0.15
0.10
T=125°C
5
0.05
0
-3.5 -3.0 -2.5 -2.0 -1.5 -1.0 -0.5
0.00
Vcc=5V
0.0
0.5
1.0
1.5
2.0
2.5
3.0
0.0
3.5
0.5
Input offset voltage (mV)
Figure 6. Output current vs. output voltage at
VCC = 2.7 V
T=125°C
0
T=25°C
T=-40°C
Vcc=2.7V
-10 T=125°C
T=-40°C
T=25°C
12/32
Sink
Vid=-1V
T=-40°C
T=25°C
25
T=125°C
0
-25
Vcc=5V
T=-40°C
T=125°C
T=25°C
-50
-20
-30
0.0
4.0
50
Output Current (mA)
Output Current (mA)
75
Sink
Vid=-1V
10
3.5
Figure 7. Output current vs. output voltage at
VCC = 5 V
30
20
1.0
1.5
2.0
2.5
3.0
Input Common Mode Voltage (V)
Source
Vid=1V
0.5
1.0
1.5
2.0
Output Voltage (V)
Source
Vid=1V
-75
2.5
DocID022467 Rev 4
0.0
0.5
1.0
1.5 2.0 2.5 3.0 3.5
Output Voltage (V)
4.0
4.5
5.0
LMV82x, LMV82xA
Electrical characteristics
Figure 8. Output current vs. supply voltage at
Vicm = VCC/2
Figure 9. Voltage gain and phase with
CL = 40 pF
90
0
40
Sink
60 Vid=-1V
Gain
T=-40°C
T=25°C
T=25°C
30
-45
-90
20
0
Vicm=Vcc/2
T=-40°C
-135
10
0
-30
-10
2.5
T=25°C
T=-40°C
3.0
-20
3.5
4.0
4.5
Supply Voltage (V)
5.0
100k
1M
Figure 11. Voltage gain and phase with
CL = 200 pF
0
40
Gain
Gain
Gain (dB)
20
-45
30
-90
20
Phase
T=-40°C
-135
10
-10
100k
-90
T=-40°C
Phase
-135
10
-180
0
-225
-10
-270
10M
1M
-45
T=25°C
-180
Vcc=5V
Vicm=2.5V
Rl=10kΩ
Cl=200pF
Gain=-100
T=125°C
-20
10k
Gain (dB)
T=25°C
Phase (°)
30
Vcc=5V
Vicm=2.5V
Rl=10kΩ
Cl=100pF
Gain=-100
10M
Frequency (Hz)
0
40
-270
10k
5.5
Figure 10. Voltage gain and phase with
CL = 100 pF
0
-225
T=125°C
-225
T=125°C
-20
10k
Phase (°)
-90
2.0
Source
Vid=1V
-180
Vcc=5V
Vicm=2.5V
Rl=10kΩ
Cl=40pF
Gain=-100
T=125°C
-60
Phase
Phase (°)
30
Gain (dB)
Output Current (mA)
T=125°C
100k
1M
-270
10M
Frequency (Hz)
Frequency (Hz)
Figure 12. Phase margin vs. output current at
VCC = 5 V
Figure 13. Stability in follower configuration
15
80
70
Sink
Source
10
50
Cl=40pF
40
30
20
10
Cl=200pF
Cl=100pF
5
Gain (dB)
Phase Margin (°)
60
Vcc=5V
Vicm=2.5V
Rl=10kΩ
T=25°C
Vcc=5V
Vicm=2.5V
Vload=2.5V
Rl=10KΩ
T=25°C
Cl=100pF
0
-5
Cl=50pF
-10
0
-1.0 -0.8 -0.6 -0.4 -0.2 0.0
Cl=20pF
0.2
0.4
0.6
0.8
1.0
Output Current (mA)
DocID022467 Rev 4
-15
100k
1M
Frequency (Hz)
10M
13/32
32
Electrical characteristics
LMV82x, LMV82xA
Figure 14. Positive and negative slew rate vs.
supply voltage
Figure 15. Positive slew rate at VCC = 5 V with
CL = 100 pF
2.5
2.0
2.0
1.5
1.5
Slew rate (V/µs)
0.5
T=-40°C
T=125°C
T=25°C
Cl=100pF
Rl=1MΩ
Vicm=Vcc/2
Vload=Vcc/2
0.0
-0.5
-1.0
Output Voltage (V)
1.0
1.0
T=125°C
T=25°C
T=-40°C
-1.5
-2.5
3.5
4.0
4.5
Supply Voltage (V)
5.0
T=25°C
-0.5
T=-40°C
-1.0
Vcc=5V
Vicm=Vcc/2
Cl=100pF
Rl=1MΩ
Figure 16. Negative slew rate at VCC = 5 V with
CL = 100 pF
2.0
1.5
Vcc=5V
Vicm=Vcc/2
Cl=100pF
Rl=1MΩ
T=125°C
1.0
0.5
T=25°C
0.0
T=-40°C
-0.5
-1.0
-1.5
-2.0
0.0
0.5
1.0
Time (µs)
-2.0
5.5
1.5
Figure 18. 0.1 Hz to 10 Hz noise at VCC = 5 V
0
Vcc=5V
T=25°C
Vicm=0.5V
60
Vicm=2.5V
40
20
0
100
1000
Frequency (Hz)
10000
-2
Vcc=5V
Vicm=(Vcc-1)/2
Vin=3Vpp
Gain=1
BW=80kHz
T=25°C
THD + N (%)
2
10
Rl=10kΩ
-3
-4
Rl=100kΩ
10
2
4
6
8
10
Time (s)
14/32
4
80
Vcc=5V
4 Vicm=2.5V
T=25°C
-6
0
3
100
10
-2
2
Time (µs)
Figure 19. Distortion + noise vs. frequency
6
0
1
Figure 17. Noise vs. frequency at VCC = 5 V
Equivalent input noise voltage density (nV/VHz)
3.0
Output Voltage (V)
0.0
-1.5
-2.0
Voltage noise (µV)
T=125°C
0.5
DocID022467 Rev 4
-4
100
1000
Frequency (Hz)
10000
LMV82x, LMV82xA
Electrical characteristics
Figure 20. Distortion + noise vs. output voltage
0
10
Rl=100kΩ
-1
THD + N (%)
10
Rl=10kΩ
-2
10
-3
10
-4
Vcc=5V
Gain=1
BW=22kHz
Vicm=Vcc/2
T=25°C
10
0.01
0.1
1
Output Voltage (Vpp)
DocID022467 Rev 4
10
15/32
32
Application information
LMV82x, LMV82xA
4
Application information
4.1
Operating voltages
The LMV82x and LMV82xA can operate from 2.5 to 5.5 V. The devices’ parameters are fully
specified for 2.5, 2.7, and 5 V power supplies. Additionally, the main specifications are
guaranteed at extended temperature ranges from -40° C to +125° C.
4.2
Input common mode range
The LMV82x and LMV82xA devices have an input common mode range that includes
ground. The input common mode range is extended from Vcc- - 0.2 V to Vcc+ - 1 V, with no
output phase reversal.
4.3
Rail-to-rail output
The operational amplifiers’ output levels can go close to the rails: 150 mV maximum above
and below the rail when connected to a 2 kΩ resistive load to Vcc/2.
4.4
Input offset voltage drift over temperature
The maximum input voltage drift over temperature variation is defined in Equation 1.
Equation 1
ΔVio
( T ) – Vio ( 25°C )
------------- = max Vio
---------------------------------------------------ΔT
T – 25°C
for Tmin < T < Tmax.
4.5
PCB layouts
For correct operation, it is advised to add 10 nF decoupling capacitors as close as possible
to the power supply pins.
4.6
Macromodel
Accurate macromodels of the LMV82x and LMV82xA are available on STMicroelectronics’
web site at www.st.com. These models are a trade-off between accuracy and complexity
(that is, time simulation) of the LMV82x and LMV82xA operational amplifiers. They emulate
the nominal performances of a typical device within the specified operating conditions
mentioned in the datasheet. They also help to validate a design approach and to select the
right operational amplifier, but they do not replace on-board measurements.
16/32
DocID022467 Rev 4
LMV82x, LMV82xA
4.7
Application information
Shutdown function
The operational amplifier is enabled when the SHDN pin is pulled high. To disable the
amplifier, the SHDN pin must be pulled down to VCC-. When in shutdown mode, the
amplifier output is in a high impedance state. The SHDN pin must never be left floating but
tied to VCC+ or VCC-.
The turn-on and turn-off times are calculated for an output variation of ±200 mV. Figure 21
and Figure 22 show the test configurations. Figure 23 and Figure 24 show the respective
results with these test configurations.
Figure 21. Test configuration for turn-on time
(Vout pulled down)
Figure 22. Test configuration for turn-off time
(Vout pulled down)
GND
GND
2kΩ
Vcc
2kΩ
Vcc
+
Vcc – 1V
+
Vcc – 1V
-
GND
GND
Figure 23. Turn-on time, VCC = 5 V,
Vout pulled down, T = 25 °C
Figure 24. Turn-off time, VCC = 5 V,
Vout pulled down, T = 25 °C
Shutdown pulse
3
3
Output voltage (V)
Voltage (V)
2
Vout
1
0
-1
Vcc = 5V
T = 25°C
RL connected to GND
-2
Vcc = 5V
T = 25°C
RL connected to GND
2
1
Vout
0
-1
-2
Shutdown pulse
-3
-3
-0.1
0.0
0.1
0.2
0.3
0.4
0.5
-0.05
Time(µs)
0.00
0.05
0.10
0.15
0.20
Time(µs)
DocID022467 Rev 4
17/32
32
Package information
5
LMV82x, LMV82xA
Package information
In order to meet environmental requirements, ST offers these devices in different grades of
ECOPACK® packages, depending on their level of environmental compliance. ECOPACK®
specifications, grade definitions and product status are available at: www.st.com.
ECOPACK® is an ST trademark.
18/32
DocID022467 Rev 4
LMV82x, LMV82xA
5.1
Package information
SC70-5 (or SOT323-5) package information
Figure 25. SC70-5 (or SOT323-5) package mechanical drawing
SIDE VIEW
DIMENSIONS IN MM
GAUGE PLANE
COPLANAR LEADS
SEATING PLANE
TOP VIEW
Table 10. SC70-5 (or SOT323-5) package mechanical data
Dimensions
Ref
Millimeters
Min
A
Typ
0.80
A1
Inches
Max
Min
1.10
0.032
Typ
0.043
0.10
A2
0.80
b
0.90
Max
0.004
1.00
0.032
0.035
0.15
0.30
0.006
0.012
c
0.10
0.22
0.004
0.009
D
1.80
2.00
2.20
0.071
0.079
0.087
E
1.80
2.10
2.40
0.071
0.083
0.094
E1
1.15
1.25
1.35
0.045
0.049
0.053
e
0.65
0.025
e1
1.30
0.051
L
0.26
<
0°
0.36
0.46
0.010
8°
0°
DocID022467 Rev 4
0.014
0.039
0.018
8°
19/32
32
Package information
5.2
LMV82x, LMV82xA
SOT23-5 package information
Figure 26. SOT23-5 package mechanical drawing
Table 11. SOT23-5 package mechanical data
Dimensions
Ref.
A
Millimeters
Min.
Typ.
Max.
Min.
Typ.
Max.
0.90
1.20
1.45
0.035
0.047
0.057
A1
20/32
Inches
0.15
0.006
A2
0.90
1.05
1.30
0.035
0.041
0.051
B
0.35
0.40
0.50
0.013
0.015
0.019
C
0.09
0.15
0.20
0.003
0.006
0.008
D
2.80
2.90
3.00
0.110
0.114
0.118
D1
1.90
0.075
e
0.95
0.037
E
2.60
2.80
3.00
0.102
0.110
0.118
F
1.50
1.60
1.75
0.059
0.063
0.069
L
0.10
0.35
0.60
0.004
0.013
0.023
K
0°
10 °
0°
DocID022467 Rev 4
10 °
LMV82x, LMV82xA
5.3
Package information
SOT23-6 package information
Figure 27. SOT23-6 package mechanical drawing
Table 12. SOT23-6 package mechanical data
Dimensions
Ref.
Millimeters
Min.
A
Typ.
0.90
A1
Inches
Max.
Min.
1.45
0.035
Typ.
Max.
0.057
0.10
0.004
A2
0.90
1.30
0.035
0.051
b
0.35
0.50
0.013
0.019
c
0.09
0.20
0.003
0.008
D
2.80
3.05
0.110
0.120
E
1.50
1.75
0.060
0.069
e
0.95
0.037
H
2.60
3.00
0.102
0.118
L
0.10
0.60
0.004
0.024
θ
0°
10 °
0°
10 °
DocID022467 Rev 4
21/32
32
Package information
5.4
LMV82x, LMV82xA
DFN8 2 x 2 mm package information
Figure 28. DFN8 2 x 2 mm package mechanical drawing (pitch 0.5 mm)
Table 13. DFN8 2 x 2 mm package mechanical data (pitch 0.5 mm)
Dimensions
Ref.
A
Millimeters
Min.
Typ.
Max.
Min.
Typ.
Max.
0.51
0.55
0.60
0.020
0.022
0.024
A1
0.05
A3
0.002
0.15
0.006
b
0.18
0.25
0.30
0.007
0.010
0.012
D
1.85
2.00
2.15
0.073
0.079
0.085
D2
1.45
1.60
1.70
0.057
0.063
0.067
E
1.85
2.00
2.15
0.073
0.079
0.085
E2
0.75
0.90
1.00
0.030
0.035
0.040
e
22/32
Inches
0.50
0.020
L
0.425
0.017
ddd
0.08
0.003
DocID022467 Rev 4
LMV82x, LMV82xA
5.5
Package information
MiniSO-8 package information
Figure 29. MiniSO-8 package mechanical drawing
Table 14. MiniSO-8 package mechanical data
Dimensions
Ref.
Millimeters
Min.
Typ.
A
Inches
Max.
Min.
Typ.
1.1
A1
0
A2
0.75
b
Max.
0.043
0.15
0
0.95
0.030
0.22
0.40
0.009
0.016
c
0.08
0.23
0.003
0.009
D
2.80
3.00
3.20
0.11
0.118
0.126
E
4.65
4.90
5.15
0.183
0.193
0.203
E1
2.80
3.00
3.10
0.11
0.118
0.122
e
L
0.85
0.65
0.40
0.60
0.006
0.033
0.026
0.80
0.016
0.024
L1
0.95
0.037
L2
0.25
0.010
k
ccc
0°
0.037
8°
0.10
DocID022467 Rev 4
0°
0.031
8°
0.004
23/32
32
Package information
5.6
LMV82x, LMV82xA
MiniSO-10 package information
Figure 30. MiniSO-10 package mechanical drawing
aaa
Table 15. MiniSO-10 package mechanical data
Dimensions
Ref.
Millimeters
Min.
Typ.
A
Max.
Min.
Typ.
1.10
Max.
0.043
A1
0.05
0.10
0.15
0.002
0.004
0.006
A2
0.78
0.86
0.94
0.031
0.034
0.037
b
0.25
0.33
0.40
0.010
0.013
0.016
c
0.15
0.23
0.30
0.006
0.009
0.012
D
2.90
3.00
3.10
0.114
0.118
0.122
E
4.75
4.90
5.05
0.187
0.193
0.199
E1
2.90
3.00
3.10
0.114
0.118
0.122
e
L
0.50
0.40
L1
k
aaa
24/32
Inches
0.55
0.020
0.70
0.016
0.95
0°
3°
0.022
0.028
0.037
6°
0.10
DocID022467 Rev 4
0°
3°
6°
0.004
LMV82x, LMV82xA
5.7
Package information
TSSOP14 package information
Figure 31. TSSOP14 package mechanical drawing
aaa
Table 16. TSSOP14 package mechanical data
Dimensions
Ref.
Millimeters
Min.
Typ.
A
Inches
Max.
Min.
Typ.
1.20
A1
0.05
A2
0.80
b
Max.
0.047
0.15
0.002
0.004
0.006
1.05
0.031
0.039
0.041
0.19
0.30
0.007
0.012
c
0.09
0.20
0.004
0.0089
D
4.90
5.00
5.10
0.193
0.197
0.201
E
6.20
6.40
6.60
0.244
0.252
0.260
E1
4.30
4.40
4.50
0.169
0.173
0.176
e
L
0.65
0.45
L1
k
aaa
1.00
0.60
0.0256
0.75
0.018
1.00
0°
0.024
0.030
0.039
8°
0.10
DocID022467 Rev 4
0°
8°
0.004
25/32
32
Package information
5.8
LMV82x, LMV82xA
TSSOP16 package information
Figure 32. TSSOP16 package mechanical drawing
aaa
b
Table 17. TSSOP16 package mechanical data
Dimensions
Ref.
Millimeters
Min.
Typ.
A
Max.
Min.
Typ.
1.20
A1
0.05
A2
0.80
b
Max.
0.047
0.15
0.002
1.05
0.031
0.19
0.30
0.007
0.012
c
0.09
0.20
0.004
0.008
D
4.90
5.00
5.10
0.193
0.197
0.201
E
6.20
6.40
6.60
0.244
0.252
0.260
E1
4.30
4.40
4.50
0.169
0.173
0.177
e
0°
L
0.45
aaa
1.00
0.65
k
L1
26/32
Inches
0.60
0.006
0.039
0.041
0.0256
8°
0°
0.75
0.018
1.00
8°
0.024
0.030
0.039
0.10
DocID022467 Rev 4
0.004
LMV82x, LMV82xA
5.9
Package information
SO-8 package information
Figure 33. SO-8 package mechanical drawing
Table 18. SO-8 package mechanical data
Dimensions
Ref.
Millimeters
Min.
Typ.
A
Inches
Max.
Min.
Typ.
1.75
0.069
A1
0.10
A2
1.25
b
0.28
0.48
0.011
0.019
c
0.17
0.23
0.007
0.010
D
4.80
4.90
5.00
0.189
0.193
0.197
E
5.80
6.00
6.20
0.228
0.236
0.244
E1
3.80
3.90
4.00
0.150
0.154
0.157
e
0.25
Max.
0.004
0.010
0.049
1.27
0.050
h
0.25
0.50
0.010
0.020
L
0.40
1.27
0.016
0.050
L1
k
ccc
1.04
1°
0.040
8°
0.10
DocID022467 Rev 4
1°
8°
0.004
27/32
32
Package information
5.10
LMV82x, LMV82xA
SO-14 package information
Figure 34. SO-14 package mechanical drawing
Table 19. SO-14 package mechanical data
Dimensions
Millimeters
Inches
Ref.
Min.
Typ.
Max.
Min.
Max.
A
1.35
1.75
0.05
0.068
A1
0.10
0.25
0.004
0.009
A2
1.10
1.65
0.04
0.06
B
0.33
0.51
0.01
0.02
C
0.19
0.25
0.007
0.009
D
8.55
8.75
0.33
0.34
E
3.80
4.0
0.15
0.15
e
1.27
0.05
H
5.80
6.20
0.22
0.24
h
0.25
0.50
0.009
0.02
L
0.40
1.27
0.015
0.05
k
ddd
28/32
Typ.
8 ° (max.)
0.10
DocID022467 Rev 4
0.004
LMV82x, LMV82xA
6
Ordering information
Ordering information
Table 20. Order codes
Order code
Temperature range
Package
Packing
Marking
LMV821ICT
SC70-5
K1S
LMV821ILT
SOT23-5
K155
LMV822IQ2T
DFN8 2x2
K1S
LMV822IST
-40 °C to +125 °C
MiniSO8
Tape & reel
K155
LMV822IDT
SO8
LMV822I
LMV824IPT
TSSOP14
LMV824I
LMV824IDT
SO14
LMV824I
LMV821AICT
SC70-5
K1T
LMV821AILT
SOT23-5
K156
LMV822AIST
MiniSO8
-40 °C to +125 °C
K156
Tape & reel
LMV822AIDT
SO8
LMV822AI
LMV824AIPT
TSSOP14
LMV824AI
LMV824AIDT
SO14
LMV824AI
Table 21. Order codes (with shutdown pin)
Order code
Temperature range
LMV820ILT
LMV823IST
Package
Packing
SOT23-6
-40 °C to +125 °C
MiniSO10
Marking
K155
Tape & reel
K155
LMV825IPT
TSSOP16
LMV825I
LMV820AILT
SOT23-6
K156
LMV823AIST
LMV825AIPT
-40 °C to +125 °C
MiniSO10
TSSOP16
DocID022467 Rev 4
Tape & reel
K156
LMV825AI
29/32
32
Ordering information
LMV82x, LMV82xA
Table 22. Order codes (automotive grade parts)
Order code
Temperature
range
LMV821IYLT
LMV822IYST
LMV822IYDT
-40 ° C to +125 ° C
Automotive grade(1)
Package
Packing
Marking
SOT23-5
K167
MiniSO8
K167
SO8
Tape & reel
LMV822IY
LMV824IYDT
SO14
LMV824IYPT
TSSOP14
LMV821AIYLT
SOT23-5
K168
MiniSO8
K168
LMV824IY
LMV822AIYST
LMV822AIYDT
-40 ° C to +125 ° C
Automotive grade(1)
SO8
LMV824AIYDT
SO14
LMV824AIYPT
TSSOP14
Tape & reel
LMV822AY
LMV824AIY
1. Qualification and characterization according to AEC Q100 and Q003 or equivalent, advanced screening
according to AEC Q001 & Q002 or equivalent.
30/32
DocID022467 Rev 4
LMV82x, LMV82xA
7
Revision history
Revision history
Table 23. Document revision history
Date
Revision
Changes
10-Nov-2011
1
Initial release.
06-Jul-2012
2
Addition of automotive grade parts.
29-Jan-2013
3
Description and Section 4.6: Macromodel: small text changes.
Updated Figure 1.
Updated titles of Figure 3, Figure 13, and Figure 27.
Updated Table 10, Table 11, Table 12, and Table 22: Order codes
(automotive grade parts).
Section 4.7: Shutdown function: added explanation of Figure 23 and
Figure 24.
10-Apr-2017
4
Updated Table 13: “L” dimension changed from 0.5 mm to 0.425
mm. Minor text revisions throughout the document,
DocID022467 Rev 4
31/32
32
LMV82x, LMV82xA
IMPORTANT NOTICE – PLEASE READ CAREFULLY
STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and
improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on
ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order
acknowledgement.
Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or
the design of Purchasers’ products.
No license, express or implied, to any intellectual property right is granted by ST herein.
Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product.
ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners.
Information in this document supersedes and replaces information previously supplied in any prior versions of this document.
© 2017 STMicroelectronics – All rights reserved
32/32
DocID022467 Rev 4
工商网监
湘ICP备2023018690号
