M14C16DD

M14C16 DD M14C16 Die Description PRODUCT s WAFER SIZE s s s s M14C16 152 mm (6 inches) 1390 x 2375 µm 101.8 x 102.4 µm 100 x 100 µm DIE IDENTIFICATION M14C16KA_R DIE SIZE (X x Y) SCRIBE LINE PAD OPENING s s s s DIE LAYOUT DI C1, C2, C3, C5, C7 C4, C6, C8 NC Die Identification (at the position shown in Figure 1) Pad contacts to the ISO pins (at the positions shown in Figure 1) These ISO pins do not appear on the M14C16 die This pad, shown in Figure 1, is Not Connected Pad locations are measured relative to the die centre (where X and Y are respectively the horizontal and vertical axis, measured in µm). Figure 1. M14C16 Die Plot C7: SDA (X= –429.0; Y= +1004.3) C5: GND (X= +337.7; Y= +1020.6) DI NC: TEST NC: TEST NC: TEST C1: VCC C3: SCL (X= –514.4; Y= –904.4) (X= +514.3; Y= –604.0) AI02496 C2: WC (X= –349.4; Y= –1004.4) DD.M14C16/9811V1.1 1/2 M14C16 DD Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. © 1998 STMicroelectronics - All Rights Reserved The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. STMicroelectronics GROUP OF COMPANIES Australia - Brazil - China - France - Germany - Italy - Japan - Korea - Malaysia - Malta - Mexico - Morocco - The Netherlands - Singapore Spain - Sweden - Switzerland - Taiwan - Thailand - United Kingdom - U.S.A. http://www.st.com 2/2