M24SR-DISCOVERY

M24SR-DISCOVERY Discovery kit for the M24SR series Dynamic NFC/RFID tag Data brief Features • Ready-to-use printed circuit board (PCB) including: – M24SR64-Y Dynamic NFC/RFID tag – 31 mm x 30 mm 13.56 MHz double layer inductive antenna etched on the PCB (ANT14) – STM32F103RGT6 64LQFP 32-bit microcontroller, with 1Mbytes of Flash memory – LCD Color Screen (320*200 pixels) – Different color LEDs – USB microB connector for board powering – JTAG connector for microcontroller firmware upgrade and debug – Joystick for menu selection • M24SR-DISCO-PREM specific features: – Bluetooth module with audio outputs connected to Jack 3.5 – Headset Table 1. Device summary Reference M24SR-DISCOVERY Order code M24SR-DISCO-STD M24SR-DISCO-PREM Figure 1. M24SR Discovery board (top side, Premium edition) Figure 2. M24SR Discovery board (back side, Premium edition) May 2015 DocID025659 Rev 3 For further information contact your local STMicroelectronics sales office. 1/4 www.st.com M24SR-DISCOVERY Description The M24SR-DISCOVERY is a demonstration kit to evaluate the features and capabilities of the M24SR series and is based on the M24SR64 device. Two versions of this kit are available: the Standard Edition and the Premium Edition. The Premium Edition includes all of the Standard edition features, plus a headset and a Bluetooth module to demonstrate the convenience to pair it with a smartphone via NFC. The M24SR64 device is a dynamic NFC/RFID tag IC with a dual interface. It embeds a 64 Kbits EEPROM memory. It can be operated from an I2C interface or by a 13.56 MHz RFID reader or an NFC phone. The I2C interface uses a two-wire serial interface, consisting of a bidirectional data line and a clock line. It behaves as a slave with respect to the I2C protocol. The RF protocol is compatible with ISO/IEC 14443 Type A and NFC Forum Type 4 Tag. The board is powered through the USB bus. It also includes a microcontroller STM32F103 to drive the EEPROM via I2C and the LCD screen via SPI bus. The M24SR-DISCOVERY (MB1138) schematics, BOM, gerber files, drivers and firmware can be downloaded from www.st.com. Figure 3. Block diagram -DFN FRQQHFWRU  6WHUHR RXWSXWV %OXHWRRWK PRGXOH  /&'FRORUGLVSOD\ 8$57OLQN 63,EXV -7$* FRQQHFWRU 670)  , &EXV 86% FRQQHFWRU -R\VWLFN 065 [ DQWHQQD 5HVHW 069 1. Available only on premium edition. 2/4 DocID025659 Rev 3 M24SR-DISCOVERY 1 Revision history Revision history Table 2. Document revision history Date Revision 06-Jan-2014 1 Initial release. 11-Feb-2014 2 Introduced M24SR-DISCO-PREM features with specific bullet in Section : Features. 3 Updated Figure 1: M24SR Discovery board (top side, Premium edition) Updated Figure 2: M24SR Discovery board (back side, Premium edition) 08-May-2015 Changes DocID025659 Rev 3 3/4 4 M24SR-DISCOVERY IMPORTANT NOTICE – PLEASE READ CAREFULLY STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgement. Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of Purchasers’ products. No license, express or implied, to any intellectual property right is granted by ST herein. Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product. ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners. Information in this document supersedes and replaces information previously supplied in any prior versions of this document. © 2015 STMicroelectronics – All rights reserved 4/4 DocID025659 Rev 3