M74HC280
9-bit parity generator
Datasheet - production data
• Pin and function compatible with 74 series 280
• ESD performance
– HBM: 2 kV
– MM: 200 V
– CDM: 1 kV
SO14
TSSOP14
Description
The M74HC280 is a high-speed CMOS 9-bit
parity generator fabricated with silicon gate
C2MOS technology.
Features
It is composed of nine data inputs (A to I) and
odd/even parity outputs (ΣODD and ΣEVEN). The
nine data inputs control the output conditions.
When the number of high-level inputs is odd,
ΣODD outputs are kept high and ΣEVEN outputs
are kept low. Conversely, when the number of
high-level outputs is even, ΣEVEN outputs are
kept high and ΣODD outputs are kept low. The IC
generates either odd or even parity making the
application flexible. The word-length capability is
easily expanded by cascading.
• High-speed:
tPD = 22 ns (typ.) at VCC = 6 V
• Low power dissipation:
ICC = 4 μA (max.) at TA = 25 °C
• High noise immunity:
VNIH = VNIH = 28 % VCC (min)
• Symmetrical output impedance:
|IOH| = IOL = 4 mA (min.)
• Balanced propagation delays:
tPLH ≅ tPHL
All inputs are equipped with protection circuits
against static discharge and transient excess
voltage.
• Wide operating voltage range:
VCC (opr) = 2 V to 6 V
Table 1. Device summary
Order code
Temp. range
Package
-55 °C to 125 °C
S014
-40 °C to 125 °C
SO14 (automotive grade)
M74HC280TTR
-55 °C to 125 °C
TSSOP14
M74HC280YTTR(1)
-40 °C to 125 °C
TSSOP14 (automotive grade)
M74HC280RM13TR
(1)
M74HC280YRM13TR
Packing
Marking
74HC280
Tape and reel
74HC280Y
HC280
HC280Y
1. Qualification and characterization according to AEC Q100 and Q003 or equivalent, advanced screening according to AEC
Q001 and Q002 or equivalent.
January 2014
This is information on a product in full production.
DocID1938 Rev 2
1/14
www.st.com
Contents
M74HC280
Contents
1
Pin information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2
Functional description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
3
Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
4
Package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
4.1
SO14 package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
4.2
TSSOP14 package information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
5
Ordering information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
6
Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
2/14
DocID1938 Rev 2
M74HC280
1
Pin information
Pin information
Figure 1. Pin connection and IED logic symbols
GAMS0601141445CB
Table 2. Pin description
Pin no
Symbol
Name and function
5, 6
ΣEVEN, ΣODD
Parity outputs
8, 9, 10, 11, 12, 13, 1, 2, 4
A to I
Data inputs
3
NC
No connection
7
GND
Ground (0 V)
14
VCC
Positive supply voltage
DocID1938 Rev 2
3/14
14
Functional description
2
M74HC280
Functional description
Figure 2. Logic diagram
GAMS0601141521CB
Table 3. Truth table
Outputs
Number of inputs A - I that are high
4/14
ΣEVEN
ΣODD
0, 2, 4, 6, 8
H
L
1, 3, 5, 7, 9
L
H
DocID1938 Rev 2
M74HC280
Functional description
Figure 3. Input and output equivalent circuit
VCC
VCC
Output
Input
GND
GND
DocID1938 Rev 2
5/14
14
Electrical characteristics
3
M74HC280
Electrical characteristics
“Absolute maximum ratings” are those values beyond which damage to the device may
occur. Functional operation under these conditions is not implied.
Table 4. Absolute maximum ratings
Symbol
VCC
Parameter
Value
Supply voltage
-0.5 to +7
VI
DC input voltage
VO
DC output voltage
IIK
DC input diode current
IOK
DC output diode current
IO
DC output current
± 25
DC VCC or ground current
± 50
ICC or
IGND
Unit
-0.5 to VCC + 0.5
± 20
500(1)
PD
Power dissipation
Tstg
Storage temperature
TL
Lead temperature (10 sec)
V
-65 to +150
300
mA
mW
°C
1. 500 mW at 65 °C; derate to 300 mW by 10 mW/°C from 65 °C to 85 °C
Table 5. Recommended operating conditions
Symbol
VCC
Value
Supply voltage
VI
Input voltage
VO
Output voltage
Top
Operating temperature
tp, tf
6/14
Parameter
Unit
2 to 6
0 to VCC
-55 to 125
Input rise and fall time
DocID1938 Rev 2
VCC = 2.0 V
0 to 1000
VCC = 4.5 V
0 to 500
VCC = 6.0 V
0 to 400
V
°C
ns
M74HC280
Electrical characteristics
Table 6. DC specifications
Test condition
Symbol
VIH
VIL
VOH
VOL
II
ICC
Parameter
High level input
voltage
Low level input
voltage
Value
TA = 25 °C
VCC
(V)
Min.
Typ.
-40 to 85 °C -55 to 125 °C Unit
Max.
Min.
Max.
Min.
2.0
1.5
1.5
1.5
4.5
3.15
3.15
3.15
6.0
4.2
4.2
4.2
Max.
V
2.0
0.5
0.5
0.5
4.5
1.35
1.35
1.35
6.0
1.8
1.8
1.8
V
2.0
IO = -20 μA
1.9
2.0
1.9
1.9
4.5
IO = -20 μA
4.4
4.5
4.4
4.4
6.0
IO = -20 μA
5.9
6.0
5.9
5.9
4.5
IO = -4.0 mA
4.18
4.31
4.13
4.10
6.0
IO = -5.2 mA
5.68
5.8
5.63
5.60
2.0
IO = 20 μA
0.1
0.1
0.1
4.5
IO = 20 μA
0.1
0.1
0.1
6.0
IO = 20 μA
0.1
0.1
0.1
4.5
IO = 4.0 mA
0.17
0.26
0.33
0.40
6.0
IO = 5.2 mA
0.18
0.26
0.33
0.40
Input leakage
current
6.0
VI = VCC or GND
± 0.1
±1
±1
μA
Quiescent supply
current
6.0
VI = VCC or GND
4
40
80
μA
High level output
voltage
Low level output
voltage
DocID1938 Rev 2
V
V
7/14
14
Electrical characteristics
M74HC280
Table 7. AC electrical characteristics
(CL = 50 pF, Input tr = tf = 6 ns)
Test condition
Symbol
TA = 25 °C
Parameter
VCC (V)
tTLH, tTHL
Output transition
time
Min.
Propagation delay
time (input to
ΣEVEN, ΣODD)
-40 to 85 °C
-55 to 125 °C
Min.
Min.
Typ.
Max.
2.0
30
75
95
110
4.5
8
15
19
22
7
13
80
200
4.5
26
40
50
58
6.0
22
34
43
49
6.0
tPLH, tPHL
Value
-
2.0
-
Max.
16
250
-
Unit
Max.
ns
19
290
ns
Table 8. Capacitive characteristics
Test condition
Sym
Value
TA = 25°C
Parameter
VCC (V)
CIN
Input capacitance
CPD
Power dissipation
capacitance(1)
5.0
Min
-
Typ
Max
5
10
-40 to 85 °C
-55 to 125 °C
Min
Min
61
Max
10
-
Max
10
-
1. CPD is defined as the value of the IC’s internal equivalent capacitance which is calculated from the operating current
consumption without load (refer to test circuit). Average operating current can be obtained by the following equation:
ICC(opr) = CPD x VCC x fIN + ICC.
Figure 4. Test circuit
GAMS0301141630CB
1. Legend:
CL = 50 pF or equivalent (includes jig and probe capacitance).
RT = ZOUT of pulse generator (typically 50 Ω).
8/14
DocID1938 Rev 2
Unit
pF
M74HC280
Electrical characteristics
Figure 5. Propagation delay time
(f = 1 MHz; 50 % duty cycle)
GAMS0601141607CB
DocID1938 Rev 2
9/14
14
Package information
4
M74HC280
Package information
In order to meet environmental requirements, ST offers these devices in different grades of
ECOPACK® packages, depending on their level of environmental compliance. ECOPACK®
specifications, grade definitions and product status are available at: www.st.com.
ECOPACK® is an ST trademark.
10/14
DocID1938 Rev 2
M74HC280
4.1
Package information
SO14 package information
Figure 6. SO14 package mechanical drawing
/
*
F
&
$
D
E
H
D
6
H
E
(
'
0
)
*$06&%
Table 9. SO14 package mechanical data
Dimensions
Ref
Millimeters
Min.
Typ.
A
a1
Inches
Max.
Min.
Typ.
1.75
0.1
0.2
a2
Max.
0.068
0.003
0.007
1.65
0.064
b
0.35
0.46
0.013
0.018
b1
0.19
0.25
0.007
0.010
C
0.5
0.019
c1
45 °
45 °
D
8.55
8.75
0.336
0.344
E
5.8
6.2
0.228
0.244
e
1.27
0.050
e3
7.62
0.300
F
3.8
4.0
0.149
0.157
G
4.6
5.3
0.181
0.208
L
0.5
1.27
0.019
0.050
M
0.68
0.026
S
8°
8°
DocID1938 Rev 2
11/14
14
Package information
4.2
M74HC280
TSSOP14 package information
Figure 7. TSSOP14 package mechanical drawing
$
$
$
H
E
.
/
F
(
'
(
3,1,'(17,),&$7,21
*$06&%
Table 10. TSSOP14 package mechanical data
Dimensions
Ref
Millimeters
Min.
Typ.
A
Max.
Min.
Typ.
1.2
A1
0.05
A2
0.8
b
Max.
0.047
0.15
0.002
0.004
0.006
1.05
0.031
0.039
0.041
0.19
0.30
0.007
0.012
c
0.09
0.20
0.004
0.0089
D
4.9
5
5.1
0.193
0.197
0.201
E
6.2
6.4
6.6
0.244
0.252
0.260
E1
4.3
4.4
4.48
0.169
0.173
0.176
e
12/14
Inches
1
0.65
K
0°
L
0.45
0.60
0.0256
8°
0°
0.75
0.018
DocID1938 Rev 2
8°
0.024
0.030
M74HC280
5
Ordering information
Ordering information
Table 11. Order codes
Order code
Temp. range
Package
Packing
M74HC280RM13TR
-55 °C to 125 °C
S014
M74HC280YRM13TR(1)
-40 °C to 125 °C
SO14 (automotive grade)
M74HC280TTR
-55 °C to 125 °C
TSSOP14
M74HC280YTTR(1)
-40 °C to 125 °C
TSSOP14 (automotive grade)
Marking
74HC280
Tape and reel
74HC280Y
HC280
HC280Y
1. Qualification and characterization according to AEC Q100 and Q003 or equivalent, advanced screening according to AEC
Q001 and Q002 or equivalent.
6
Revision history
Table 12. Document revision history
Date
15-Jan-2014
Revision
2
Changes
Removed DIP14 package
Added ESD data
Table 1: Device summary: added automotive grade order codes,
added temperature range, and marking details.
Added Section 5: Ordering information.
DocID1938 Rev 2
13/14
14
M74HC280
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
ST PRODUCTS ARE NOT DESIGNED OR AUTHORIZED FOR USE IN: (A) SAFETY CRITICAL APPLICATIONS SUCH AS LIFE
SUPPORTING, ACTIVE IMPLANTED DEVICES OR SYSTEMS WITH PRODUCT FUNCTIONAL SAFETY REQUIREMENTS; (B)
AERONAUTIC APPLICATIONS; (C) AUTOMOTIVE APPLICATIONS OR ENVIRONMENTS, AND/OR (D) AEROSPACE APPLICATIONS
OR ENVIRONMENTS. WHERE ST PRODUCTS ARE NOT DESIGNED FOR SUCH USE, THE PURCHASER SHALL USE PRODUCTS AT
PURCHASER’S SOLE RISK, EVEN IF ST HAS BEEN INFORMED IN WRITING OF SUCH USAGE, UNLESS A PRODUCT IS
EXPRESSLY DESIGNATED BY ST AS BEING INTENDED FOR “AUTOMOTIVE, AUTOMOTIVE SAFETY OR MEDICAL” INDUSTRY
DOMAINS ACCORDING TO ST PRODUCT DESIGN SPECIFICATIONS. PRODUCTS FORMALLY ESCC, QML OR JAN QUALIFIED ARE
DEEMED SUITABLE FOR USE IN AEROSPACE BY THE CORRESPONDING GOVERNMENTAL AGENCY.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2014 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
14/14
DocID1938 Rev 2