M74HC4052C1R

M54HC4051/52/53 M74HC4051/52/53 ANALOG MULTIPLEXER/DEMULTIPLEXER: SINGLE 8 CHANNEL, DUAL 4 CHANNEL, TRIPLE 2 CHANNEL . . . . . . . . . . . LOW POWER DISSIPATION o ICC = 4 µA (MAX.) AT TA = 25 C LOGIC LEVEL TRANSLATION TO ENABLE 5V LOGIC SIGNAL TO COMMUNICATE WITH ±5V ANALOG SIGNAL LOW ”ON” RESISTANCE: 70Ω TYP. (VCC - VEE = 4.5 V) 50Ω TYP. (VCC - VEE = 9 V) WIDE ANALOG INPUT VOLTAGE RANGE: ±6V FAST SWITCHING: tpd = 15 ns (TYP.) AT TA = 25 oC LOW CROSSTALK BETWEEN SWITCHES HIGH ON/OFF OUTPUT VOLTAGE RATIO WIDE OPERATING VOLTAGE RANGE (VCC - VEE) = 2V TO 12V LOW SINE WAVE DISTORTION 0.02% AT VCC - VEE = 9V HIGH NOISE IMMUNITY VNIH = VNIL = 28 % VCC (MIN.) PIN AND FUNCTION COMPATIBLE WITH HCC/HCF4051/4052/4053B B1R (Plastic Package) F1R (Ceramic Package) M1R (Micro Package) C1R (Chip Carrier) ORDER CODES : M54HCXXXXF1R M74HCXXXXM1R M74HCXXXXB1R M74HCXXXXC1R DESCRIPTION These devices are analog multiplexer demultiplexers in high speed silicon gate C 2MOS technology and they are pin compatible with the equivalent metal gate CMOS ”4000B” series. These analog switches are bidirectional and digitally PIN CONNECTION (top view) HC4051 controlled. A built-in level shifting is included to allow them an input range of up to ± 6V (peak) for an analog signal with digital control signal of 0 to 6V. VEE supply pin is provided for analog input signals. They have an inhibit (INH) input terminal to disable all the switches when high. For operation as a digital multiplexer/demultiplexer, VEE is connected to GND. HC4052 HC4053 October 1993 1/15 M54/M74HC4051/4052/4053 D ESCRIPTION The HC4051 is a single 8 channel multiplexer demultiplexer having three binary control inputs A, B and C to select 1 of 8 to be turned on, and connected to the output. The HC4052 has a pair of four channel multiplexer demultiplexer having two control inputs A and B that CHIP CARRIER HC4051 HC4052 HC4053 select one of four channels of the two sections. The HC4053 is a triple two channel multiplexer demultiplexer having three separate digital control inputs A, B and C to select independently one of a pair of channles. TRUTH TABLE (HC4051) INPUT STATES INHIBIT C B L L L L L L L L H X: DON’T CARE TRUTH TABLE (HC4052) ”ON” CHANNEL 0 1 2 3 4 5 6 7 NONE INPUT STATES INHIBIT L L H X: DON’T CARE A L H L H L H L H X INPUT STATES INHIBIT B L L L L H X: DON’T CARE A L H L H X ”ON” CHANNELS 0X, 0Y 1X, 1Y 2X, 2Y 3X, 3Y NONE L L L L H H H H X L L H H L L H H X L L H H X TRUTH TABLE (HC4053) A or B or C L H X ”ON” CHANNELS ax or bx or cx ay or by or cy NONE 2/15 M54/M74HC4051/4052/4053 I EC LOGIC SYMBOLS HC4051 HC4052 HC4053 PIN DESCRIPTION (HC4051) PIN No 3 6 7 11, 10, 9 13, 14, 15, 12, 1, 5, 2, 4 8 16 SYMBOL COM OUT/IN INH VEE A, B, C 0 TO 7 GND VCC NAME AND FUNCTION Common Output/input INHIBIT Input Negative Supply Voltage Select Inputs Independent Input/Outputs Ground (0V) Positive Supply Voltage PIN DESCRIPTION (HC4052) PIN No 1, 5, 2, 4 6 7 10, 9 12, 14, 15, 11 3 13 8 16 SYMBOL 0Y TO 3Y INH V EE A, B 0X TO 3X COM Y OUT/IN COM X OUT/IN GND VCC NAME AND FUNCTION Independent Input/Outputs INHIBIT Input Negative Supply Voltage Select Inputs Independent Input/Outputs Common X Output/input Common Y Output/input Ground (0V) Positive Supply Voltage PIN DESCRIPTION (HC4053) PIN No 2, 1 5, 3 6 7 11, 10, 9 12, 13 14, 15, 4 8 16 SYMBOL bx, by cx, cy INH VEE A, B, C ax, ay ax TO cy GND VCC NAME AND FUNCTION Independent Input/Outputs Independent Input/Outputs INHIBIT Input Negative Supply Voltage Select Inputs Independent Input/Outputs Common Output/input Ground (0V) Positive Supply Voltage 3/15 M54/M74HC4051/4052/4053 FUNCTIONAL DIAGRAM HC4051 HC4052 4/15 M54/M74HC4051/4052/4053 FUNCTIONAL DIAGRAM HC4053 ABSOLUTE MAXIMUM RATINGS Symbol VCC VCC - VEE VIN VI/O ICK IIOK IT ICC PD Tstg TL Supply Voltage Range Supply Voltage Range Control Input Voltage Switch I/O Voltage Control Input Diode Current I/O Diode Current Switch Through Current DC VCC or Ground Current Power Dissipation Storage Temperature Lead Temperature (10 sec) Parameter Value -0.5 to +7 -0.5 to 13 -0.5 to VCC + 0.5 VEE - 0.5 to VCC + 0.5 ± 20 ± 20 ± 25 ± 50 500 (*) -65 to +150 300 Unit V V V V mA mA mA mA mW o o C C Absolute Maximum Ratings are those values beyond which damage tothe device may occur. Functional operation under these conditions is not implied. (*) 500 mW: ≅ 65 oC derate to 300 mW by 10mW/oC: 65 oC to 85 oC 5/15 M54/M74HC4051/4052/4053 R ECOMMENDED OPERATING CONDITIONS Symbol VCC VEE VCC - VEE VIN VI/O Top tr, tf Supply Voltage Supply Voltage Supply Voltage Input Voltage Input/Output Voltage Operating Temperature: Input Rise and Fall Time M54HC Series M74HC Series VCC = 2 V VCC = 4.5 V VCC = 6 V Parameter Value 2 to 6 -6 to 0 2 to 12 0 to VCC VEE to V CC -55 to +125 -40 to +85 0 to 1000 0 to 500 0 to 400 Unit V V V V V o o C C ns DC SPECIFICATIONS Test Conditions Symbol Parameter VCC (V) 2.0 4.5 6.0 2.0 4.5 6.0 4.5 GND VIN = VIHC or VILC 4.5 -4.5 VI/O = VCC to VEE II/O ≤ 2 mA 6.0 -6.0 2.0 GND VIN = VIHC or VILC 4.5 GND VI/O = VCC or VEE II/O ≤ 2 mA 4.5 -4.5 ∆RON Difference of ON Resistance Between Switches Input/Output Leakage Current (SWITCH OFF) Switch Input Leakage Current (SWITCH ON, OUTPUT OPEN) Control Input Current Quiescent Supply Current 6.0 -6.0 4.5 GND 4.5 6.0 85 55 50 150 70 50 45 10 5 5 VEE (V) TA = 25 oC 54HC and 74HC Min. 1.5 3.15 4.2 0.5 1.35 1.8 180 120 100 150 100 80 30 12 10 ±0.06 ±0.1 Typ. Max. Value -40 to 85 oC -55 to 125 oC Unit 74HC 54HC Min. 1.5 3.15 4.2 0.5 1.35 1.8 225 150 125 190 125 100 35 15 12 ±0.6 ±1 Max. Min. 1.5 3.15 4.2 0.5 1.35 1.8 270 180 150 230 150 120 45 18 15 ±1.2 ±2 Ω Ω V V Max. VIHC High Level Control Input Voltage Low Level Control Input Voltage ON Resistance V ILC RON VIN = VIHC or VILC -4.5 VI/O = VCC or VEE -6.0 II/O ≤ 2 mA IOFF 6.0 GND 6.0 VOS = VCC or GND -6.0 V IS = GND or VCC VIN = VILC or VIHC VOS = VCC or GND VIN = VIHC or VILC -6.0 VIN = VCC or GND VIN = VCC or GND µA IIZ 6.0 GND 6.0 ±0.06 ±0.1 ±0.6 ±1 ±1.2 ±2 µA µA µA IIN ICC 6.0 GND 6.0 GND 6.0 -6.0 ± 0.1 4 8 ±0.1 40 80 ±1 80 160 6/15 M54/M74HC4051/4052/4053 A C ELECTRICAL CHARACTERISTICS (C L = 50 pF, Input t r = tf = 6 ns) Test Conditions Symbol Parameter VCC (V) VEE (V) TA = 25 oC 54HC and 74HC Min. Typ. Max. 25 6 5 4 64 18 15 18 50 14 12 14 100 33 28 29 95 30 26 26 5 HC4051 HC4052 HC4053 HC4051 HC4052 HC4053 HC4051 HC4052 HC4053 HC4051 HC4052 HC4053 36 19 11 7 7 7 0.95 0.85 0.75 70 71 67 225 45 38 10 70 40 20 15 15 15 2 2 2 280 56 48 10 70 40 20 15 15 15 2 2 2 340 68 58 10 70 40 20 15 15 15 2 2 2 pF pF ns 225 45 38 225 45 38 250 50 43 280 56 48 280 56 48 315 63 54 340 68 58 340 68 58 375 7 64 ns ns ns 60 12 10 Value -40 to 85 oC -55 to 125 oC 74HC 54HC Min. Max. Min. Max. 75 15 13 90 18 15 ns Unit ΦI/O Phase Difference Between Input and Output 2.0 GND 4.5 GND 6.0 GND 4.5 -4.5 2.0 GND RL = 1KΩ 4.5 GND 6.0 GND 4.5 -4.5 2.0 GND RL = 1KΩ 4.5 GND 6.0 GND 4.5 -4.5 2.0 GND RL = 1KΩ 4.5 GND 6.0 GND 4.5 -4.5 2.0 GND RL = 1KΩ 4.5 GND 6.0 GND 4.5 -4.5 tPZL tPZH Output Enable Time (for 4051/4052) tPZL tPZH Output Enable Time (for 4053) tPLZ tPHZ Output Disable Time (for 4051/4052) tPLZ tPHZ Output Disable Time (for 4053) CIN CI/O Input Capacitance Common Terminal Capacitance Switch Terminal Capacitance Feed Through Capacitance Power Dissipation Capacitance 5.0 -5.0 CI/O 5.0 -5.0 pF CIOS 5.0 -5.0 pF CPD (*) 5.0 GND pF (*) CPD is defined as the value of the IC’s internal equivalent capacitance which is calculated from the operating current consumption without load. (Refer to Test Circuit). Average operting current can be obtained by the following equation. ICC(opr) = CPD • VCC • fIN + ICC 7/15 M54/M74HC4051/4052/4053 A NALOG SWITCH CHARACTERISTICS (GND = 0 V T A = 25 o C) Test Conditions Symbol Parameter Sine Wave Distortion fMAX Frequency Response (Switch ON) VCC (V) 2.25 4.5 6.0 VEE VIN (V) (Vp-p) 2.25 4 -4.5 -6.0 8 ALL (*) HC4051 (**) HC4052 (**) HC4053 (**) ALL (*) HC4051 (**) HC4052 (**) HC4053 (**) 6.0 -6.0 ALL (*) HC4051 (**) HC4052 (**) HC4053 (**) VIN is centered at (VCC - VEE)/2. Adjust input for 0 dBm RL = 600 Ω CL = 50 pF fIN = 1 KHz sine wave Adjust RL at set up so that IS = 0A CL = 50 pF RL = 600 Ω fIN = 1 MHz square wave Adjust VIN to Obtain 0 dBm at Input RL = 600 Ω CL = 50 pF fIN = 1 MHz sine wave Value Unit Typ. fIN = 1 KHz RL = 10 KΩ CL = 50 pF 0.025 0.020 0.018 120 45 70 95 190 70 110 150 200 85 140 190 -50 -50 -50 60 140 200 -50 -50 -50 dB mV dB MHz % 11 Adjust fIN voltage to Obtain 0 dBm at VOS. Increase fIN Frequency until dB Meter 2.25 -2.25 Reads -3dB RL = 50 Ω CL = 10 pF fIN = 1 KHz sine wave 4.5 -4.5 Feedthrough Attenuation (Switch OFF) Crosstalk (Control Input to Signal Output) Crosstalk (Between Any Switches) 2.25 -2.25 4.5 -4.5 6.0 -6.0 2.25 -2.25 4.5 -4.5 6.0 -6.0 2.25 -2.25 4.5 6.0 -4.5 -6.0 (*): Input COMMON Terminal, and measured at SWITCH Terminal. (**): Input SWITCH Terminal, and measured at COMMON Terminal. NOTE: These characteristics are determined by design of devices. 8/15 M54/M74HC4051/4052/4053 SWITCHING CHARACTERISTICS TEST CIRCUIT tPLZ, tPHZ, tPZL, tPZH. CROSSTALK (control to output) BANDWIDTH AND FEEDTHROUGH ATTENUATION CROSSTALK BETWEEN ANY TWO SWITCHES GND (VSS) CI–O CI/O GND (VSS) 9/15 M54/M74HC4051/4052/4053 SWITCHING CHARACTERISTICS TEST WAVEFORM C HANNEL RESISTANCE (RON) I CC (Opr.) 10/15 M54/M74HC4051/4052/4053 Plastic DIP16 (0.25) MECHANICAL DATA mm MIN. a1 B b b1 D E e e3 F I L Z 3.3 1.27 8.5 2.54 17.78 7.1 5.1 0.130 0.050 0.51 0.77 0.5 0.25 20 0.335 0.100 0.700 0.280 0.201 1.65 TYP. MAX. MIN. 0.020 0.030 0.020 0.010 0.787 0.065 inch TYP. MAX. DIM. P001C 11/15 M54/M74HC4051/4052/4053 Ceramic DIP16/1 MECHANICAL DATA mm MIN. A B D E e3 F G H L M N P Q 7.8 2.29 0.4 1.17 0.22 0.51 0.38 17.78 2.79 0.55 1.52 0.31 1.27 10.3 8.05 5.08 0.307 0.090 0.016 0.046 0.009 0.020 3.3 0.015 0.700 0.110 0.022 0.060 0.012 0.050 0.406 0.317 0.200 TYP. MAX. 20 7 0.130 MIN. inch TYP. MAX. 0.787 0.276 DIM. P053D 12/15 M54/M74HC4051/4052/4053 SO16 (Narrow) MECHANICAL DATA DIM. MIN. A a1 a2 b b1 C c1 D E e e3 F G L M S 3.8 4.6 0.5 9.8 5.8 1.27 8.89 4.0 5.3 1.27 0.62 8° (max.) 0.149 0.181 0.019 10 6.2 0.35 0.19 0.5 45° (typ.) 0.385 0.228 0.050 0.350 0.157 0.208 0.050 0.024 0.393 0.244 0.1 mm TYP. MAX. 1.75 0.2 1.65 0.46 0.25 0.013 0.007 0.019 0.004 MIN. inch TYP. MAX. 0.068 0.007 0.064 0.018 0.010 P013H 13/15 M54/M74HC4051/4052/4053 PLCC20 MECHANICAL DATA mm MIN. A B D d1 d2 E e e3 F G M M1 1.27 1.14 7.37 1.27 5.08 0.38 0.101 0.050 0.045 9.78 8.89 4.2 2.54 0.56 8.38 0.290 0.050 0.200 0.015 0.004 TYP. MAX. 10.03 9.04 4.57 MIN. 0.385 0.350 0.165 0.100 0.022 0.330 inch TYP. MAX. 0.395 0.356 0.180 DIM. P027A 14/15 M54/M74HC4051/4052/4053 Information furnished is believed to be accurate and reliable. However, SGS-THOMSON Microelectronics assumes no responsability for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may results from its use. No license is granted by implication or otherwise under any patent or patent rights of SGS-THOMSON Microelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. SGS-THOMSON Microelectronics products are not authorized for use ascritical components in life support devices or systems without express written approval of SGS-THOMSON Microelectonics. © 1994 SGS-THOMSON Microelectronics - All Rights Reserved SGS-THOMSON Microelectronics GROUP OF COMPANIES Australia - Brazil - France - Germany - Hong Kong - Italy - Japan - Korea - Malaysia - Malta - Morocco - The Netherlands Singapore - Spain - Sweden - Switzerland - Taiwan - Thailand - United Kingdom - U.S.A 15/15