M8EK900-KI220

M8EK900 M8DKPRO, M8DKFL M8 FLASH+PSD System Development Tools s s Hardware Tools: – FLASH+PSD Evaluation Board Kit based on popular MCUs – FLASH+PSD FlashLINK JTAG In-System Programming (ISP) Kit – FLASH+PSD PSDpro insertion parallel device programmer kit Software Tools: – Integrated suite of industry standard design tools ported to a Windows environment – M8 PSDsoft for the M88 family, supplied on a CD-ROM, sold as part of a kit, with free upgrades available on the web site, after product registration – PSDsoft Express for the M89 family, may be downloaded from the ST web site (www.st.com/flashpsd) at no charge, after registration. Figure 1. M8EK900-KI Kit Figure 2. M8DKFL-101 Kit DESCRIPTION STMicroelectronics offers a set of user friendly PC-based hardware and software tools for design, development and programming of FLASH+PSD based MCU systems. These tools can be used with any PC using Microsoft Windows 95, Windows 98 or Windows NT. HARDWARE TOOLS The hardware tools are summarized in Table 1 and may be ordered individually or in kits. Figure 3. M8DKPRO Kit Table 1. Product M8EK900-KI 2 M8DKFL-101 M8DKPRO M8PSDSOFT Summary1 FLASH+PSD/80C32 MCU Evaluation and JTAG ISP Kit for M88 or M89 families FlashLINK JTAG ISP Kit PSDpro Parallel Programmer Kit M8PSDsoft CD-ROM (part of a kit) Note: 1. Please see Table 2 for complete information. 2. Another Evaluation kit, based on the ST9R158 MCU, is currently under development. June 2000 1/4 M 8EK900, M8DKPRO, M8DKFL SOFTWARE TOOLS M8 PSDsoft M8 PSDsoft (for the M88 family) is user-friendly evaluation, development and programming software. It uses a point-and-click graphical user interface that leads the designer, in a logical stepby-step procedure, to configure, design, compile and program the FLASH+PSD. The software has a built-in on-line help feature, and all relevant manuals are included on the CD. This software takes the user sequentially through the following key steps: s Logic design entry (CPLD) s s s s ORDERING INFORMATION SCHEME The notation used for the device number is as shown in Table 2. For a list of available options, or for further information on any aspect of this device, please consult our pages on the world wide web: www.st.com/flashpsd or contact your nearest ST Sales Office. FLASH+PSD Device configuration Logic synthesis and fitting MCU code mapping FLASH+PSD Programming Code, for: – FlashLINK JTAG ISP, or – PSDpro insertion programmer PSDsoft Express PSDsoft Express (for the “easy-to-design-in” M89 family) is user-friendly, point-and-click, menudriven, evaluation, development and programming software. It can be downloaded, at no charge, from the ST web site, after registration. Included in the software is a wizard that guides the designer. The system designer does not need to have exhaustive knowledge of PLDs or a PLD design language (such as ABEL). The software steps the designer through seven key steps from configuration of the FLASH+PSD to programming the code and firmware. Table 2. Ordering Information Scheme Part Number M8EK900-KI110 FLASH+PSD/80C32 Evaluation and JTAG ISP Kit Item Name Mains Power 110 V FLASH+PSD Package PLCC52 Description 8-bit FLASH+PSD/80C32 MCU Evaluation Board for the M88 and M89 families, FlashLINK JTAG Programmer, JTAG Loop-back cable, UART cable, Power supply, PSDsoft development software for the M88 family, MCU and FLASH+PSD sample PSDpro Parallel Programmer, FlashLINK JTAG serial programmer, JTAG Loopback cable, Parallel Cable, Power Supply, M8 Family Adapter, Device Package Adapter, PSDsoft development software for the M88 family JTAG ISP Programmer with PSDsoft development software M8EK900-KI220 M8DKPRO-K52-110 M8DKPRO-T52-110 M8DKPRO-K52-220 M8DKPRO-T52-220 M8DKFL-101 220 V 110 V PLCC52 PLCC52 PQFP52 PLCC52 PQFP52 — PSDpro Insertion Programmer Kit 110 V 220 V 220 V FlashLINK JTAG ISP Kit — 2/4 M8EK900, M8DKPRO, M8DKFL Table 3. Revision History Date 01-Nov-1999 21-Jun-2000 Document written M8EK900-KI illustration replaced by the new version Addition of references to, and descriptions of, PSDsoft Express Description of Revision 3/4 M 8EK900, M8DKPRO, M8DKFL Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express writt en approval of STMicroelectronics. © 2000 STMicroelectronics - All Rights Reserved The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. STMicroelectronics GROUP OF COMPANIES Australia - Brazil - China - Finland - France - Germany - Hong Kong - India - Italy - Japan - Malaysia - Malta - Morocco - Singapore - Spain Sweden - Switzerland - United Kingdom - U.S.A. http://www. st.com 4/4