MJB44H11T4-A

MJB44H11T4-A Automotive-grade low voltage NPN power transistor Datasheet - production data Features • Designed for automotive applications and AEC- Q101 qualified TAB • Low collector-emitter saturation voltage • Fast switching speed 3 Applications 1 • Power amplifier D2PAK • Switching circuits Description Figure 1. Internal schematic diagram This device is an NPN transistor manufactured using new low voltage planar technology with double metal process. The result is a transistor which boasts exceptionally high gain performance coupled with very low saturation voltage. Table 1. Device summary Order codes Marking Package Packaging MJB44H11T4-A MJB44H11-A D2PAK Tape and reel May 2014 This is information on a product in full production. DocID026340 Rev 1 1/11 www.st.com Absolute maximum ratings 1 MJB44H11T4-A Absolute maximum ratings Table 2. Absolute maximum ratings Symbol Parameter Value Unit VCEO Collector-emitter voltage (IB = 0) 80 V VEBO Emitter-base voltage (IC = 0) 5 V Collector current 10 A Collector peak current 20 A PTOT Total dissipation at Tcase = 25 °C 50 W TSTG Storage temperature -55 to 150 °C 150 °C Value Unit IC ICM TJ Max. operating junction temperature Table 3. Thermal data Symbol 2/11 Parameter RthJC Thermal resistance junction-case max 2.5 °C/W RthJA Thermal resistance junction-ambient max 62.5 °C/W DocID026340 Rev 1 MJB44H11T4-A 2 Electrical characteristics Electrical characteristics Tcase = 25 °C; unless otherwise specified. Table 4. Electrical characteristics Symbol Parameter VCEO(sus)(1) Collector-emitter sustaining voltage (IB = 0) IC = 30 mA ICES Collector cut-off current (VBE = 0) VCE = 80 V - 10 µA IEBO Emitter cut-off current (IC = 0) VEB = 5 V - 50 µA VCE(sat)(1) Collector-emitter saturation voltage IC = 8 A IB = 0.4 A - 1 V VBE(sat)(1) Base-emitter saturation voltage IC = 8 A IB = 0.8 A - 1.5 V IC = 2 A_ VCE = 1 V 60 - IC = 4 A_ _ VCE = 1 V 40 - hFE(1) DC current gain Test conditions Min. Typ. 80 - Max. Unit V 1. Pulse test: pulse duration ≤ 300 µs, duty cycle ≤ 2 %. DocID026340 Rev 1 3/11 11 Electrical characteristics 2.1 MJB44H11T4-A Electrical characteristics (curves) Figure 2. Safe operating area * $ "  * $ ."9 16-4&% Figure 3. Derating curve 16-4&
01&3"5*0/
       * $ ."9 $0/5 
˜T   
˜T    
NT  %$
01&3"5*0/       'PS
TJOHMF
OPO SFQFUJUJWF
QVMTF                   7 $& 7 $0Y Figure 4. DC current gain 4/11 DocID026340 Rev 1 Figure 5. Collector-emitter saturation voltage MJB44H11T4-A 3 Package mechanical data Package mechanical data In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK® is an ST trademark. Figure 6. D²PAK (TO-263) drawing 0079457_T DocID026340 Rev 1 5/11 11 Package mechanical data MJB44H11T4-A Table 5. D²PAK (TO-263) mechanical data mm Dim. Min. Typ. A 4.40 4.60 A1 0.03 0.23 b 0.70 0.93 b2 1.14 1.70 c 0.45 0.60 c2 1.23 1.36 D 8.95 9.35 D1 7.50 E 10 E1 8.50 10.40 e 2.54 e1 4.88 5.28 H 15 15.85 J1 2.49 2.69 L 2.29 2.79 L1 1.27 1.40 L2 1.30 1.75 R V2 6/11 Max. 0.4 0° 8° DocID026340 Rev 1 MJB44H11T4-A Package mechanical data Figure 7. D²PAK footprint(a) 16.90 12.20 5.08 1.60 3.50 9.75 Footprint a. All dimension are in millimeters DocID026340 Rev 1 7/11 11 Packaging mechanical data 4 MJB44H11T4-A Packaging mechanical data Figure 8. Tape 10 pitches cumulative tolerance on tape +/- 0.2 mm T P0 Top cover tape P2 D E F B1 K0 For machine ref. only including draft and radii concentric around B0 W B0 A0 P1 D1 User direction of feed R Bending radius User direction of feed AM08852v1 8/11 DocID026340 Rev 1 MJB44H11T4-A Packaging mechanical data Figure 9. Reel T REEL DIMENSIONS 40mm min. Access hole At slot location B D C N A Full radius G measured at hub Tape slot in core for tape start 25 mm min. width AM08851v2 Table 6. D²PAK (TO-263) tape and reel mechanical data Tape Reel mm mm Dim. Dim. Min. Max. A0 10.5 10.7 A B0 15.7 15.9 B 1.5 D 1.5 1.6 C 12.8 D1 1.59 1.61 D 20.2 E 1.65 1.85 G 24.4 F 11.4 11.6 N 100 K0 4.8 5.0 T P0 3.9 4.1 P1 11.9 12.1 Base qty 1000 P2 1.9 2.1 Bulk qty 1000 R 50 T 0.25 0.35 W 23.7 24.3 DocID026340 Rev 1 Min. Max. 330 13.2 26.4 30.4 9/11 11 Revision history 5 MJB44H11T4-A Revision history Table 7. Document revision history 10/11 Date Revision 12-May-2014 1 Changes Initial release. DocID026340 Rev 1 MJB44H11T4-A Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. ST PRODUCTS ARE NOT DESIGNED OR AUTHORIZED FOR USE IN: (A) SAFETY CRITICAL APPLICATIONS SUCH AS LIFE SUPPORTING, ACTIVE IMPLANTED DEVICES OR SYSTEMS WITH PRODUCT FUNCTIONAL SAFETY REQUIREMENTS; (B) AERONAUTIC APPLICATIONS; (C) AUTOMOTIVE APPLICATIONS OR ENVIRONMENTS, AND/OR (D) AEROSPACE APPLICATIONS OR ENVIRONMENTS. WHERE ST PRODUCTS ARE NOT DESIGNED FOR SUCH USE, THE PURCHASER SHALL USE PRODUCTS AT PURCHASER’S SOLE RISK, EVEN IF ST HAS BEEN INFORMED IN WRITING OF SUCH USAGE, UNLESS A PRODUCT IS EXPRESSLY DESIGNATED BY ST AS BEING INTENDED FOR “AUTOMOTIVE, AUTOMOTIVE SAFETY OR MEDICAL” INDUSTRY DOMAINS ACCORDING TO ST PRODUCT DESIGN SPECIFICATIONS. PRODUCTS FORMALLY ESCC, QML OR JAN QUALIFIED ARE DEEMED SUITABLE FOR USE IN AEROSPACE BY THE CORRESPONDING GOVERNMENTAL AGENCY. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2014 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com DocID026340 Rev 1 11/11 11