NUCLEO-L496ZG-P

NUCLEO‑XXXXZX NUCLEO‑XXXXZX‑P NUCLEO‑XXXXZX‑Q Data brief STM32 Nucleo-144 boards Features • Common features – STM32 microcontroller in LQFP144 package – 3 user LEDs – 2 user and reset push-buttons – 32.768 kHz crystal oscillator – Board connectors: ◦ SWD – ◦ ST Zio expansion connector including ARDUINO® Uno V3 ◦ ST morpho expansion connector Flexible power-supply options: ST-LINK, USB VBUS, or external sources – NUCLEO-U575ZI-Q example. Boards with different references show different layouts. Picture is not contractual. Product status link • On-board ST-LINK debugger/programmer with USB re-enumeration capability: mass storage, Virtual COM port, and debug port – Comprehensive free software libraries and examples available with the STM32Cube MCU Package – Support of a wide choice of Integrated Development Environments (IDEs) including IAR Embedded Workbench®, MDK-ARM, and STM32CubeIDE Board-specific features – External or internal SMPS to generate Vcore logic supply – – – ◦ ◦ NUCLEO-XXXXZX NUCLEO-F207ZG, NUCLEO-F303ZE, NUCLEO-F412ZG, NUCLEO-F413ZH, NUCLEO-F429ZI, NUCLEO-F439ZI, NUCLEO-F446ZE, NUCLEO-F722ZE, NUCLEO-F746ZG, NUCLEO-F756ZG, NUCLEO-F767ZI, NUCLEO-H723ZG, NUCLEO-H743ZI, NUCLEO-H753ZI, NUCLEO-L496ZG, NUCLEO-L4A6ZG, NUCLEO-L4P5ZG, NUCLEO-L4R5ZI NUCLEO-XXXXZX-P NUCLEO-L496ZG-P, NUCLEO-L4R5ZI-P NUCLEO-XXXXZX-Q NUCLEO-H745ZI-Q, NUCLEO-H755ZI-Q, NUCLEO-H7A3ZI-Q, NUCLEO-L552ZE-Q, NUCLEO-U575ZI-Q Ethernet compliant with IEEE-802.3-2002 USB OTG full speed or device only Board connectors: – USB with Micro-AB or USB Type-C® Ethernet RJ45 Arm® Mbed Enabled™ compliant Description The STM32 Nucleo-144 board provides an affordable and flexible way for users to try out new concepts and build prototypes by choosing from the various combinations of performance and power consumption features, provided by the STM32 microcontroller. For the compatible boards, the internal or external SMPS significantly reduces power consumption in Run mode. The ST Zio connector, which extends the ARDUINO® Uno V3 connectivity, and the ST morpho headers provide an easy means of expanding the functionality of the Nucleo open development platform with a wide choice of specialized shields. The STM32 Nucleo-144 board does not require any separate probe as it integrates the ST-LINK debugger/programmer. The STM32 Nucleo-144 board comes with the STM32 comprehensive free software libraries and examples available with the STM32Cube MCU Package. DB3171 - Rev 14 - June 2021 For further information contact your local STMicroelectronics sales office. www.st.com NUCLEO‑XXXXZX NUCLEO‑XXXXZX‑P NUCLEO‑XXXXZX‑Q Ordering information 1 Ordering information To order an STM32 Nucleo-144 board, refer to Table 1. For a detailed description of each board, refer to its user manual on the product web page. Additional information is available from the datasheet and reference manual of the target STM32. Table 1. List of available products Order code Board reference User manual NUCLEO-F207ZG STM32F207ZGT6 NUCLEO-F303ZE STM32F303ZET6 NUCLEO-F412ZG STM32F412ZGT6 NUCLEO-F413ZH STM32F413ZHT6 NUCLEO-F429ZI STM32F429ZIT6 MB1137 NUCLEO-F439ZI NUCLEO-F446ZE NUCLEO-F722ZE NUCLEO-F746ZG NUCLEO-F756ZG DB3171 - Rev 14 Target STM32 UM1974 STM32F439ZIT6 STM32F446ZET6 STM32F722ZET6 STM32F746ZGT6 STM32F756ZGT6 Differentiating features • Arm® Mbed Enabled™ • Ethernet • USB OTG FS on Micro‑AB connector • ST-LINK/V2-1 • Arm® Mbed Enabled™ • Device-only USB on Micro‑AB connector • ST-LINK/V2-1 • Arm® Mbed Enabled™ • USB OTG FS on Micro‑AB connector • ST-LINK/V2-1 • USB OTG FS on Micro‑AB connector • ST-LINK/V2-1 • Arm® Mbed Enabled™ • Ethernet • USB OTG FS on Micro‑AB connector • ST-LINK/V2-1 • Arm® Mbed Enabled™ • Ethernet • USB OTG FS on Micro‑AB connector • ST-LINK/V2-1 • Cryptography • Arm® Mbed Enabled™ • USB OTG FS on Micro‑AB connector • ST-LINK/V2-1 • USB OTG FS on Micro‑AB connector • ST-LINK/V2-1 • Arm® Mbed Enabled™ • Ethernet • USB OTG FS on Micro‑AB connector • ST-LINK/V2-1 • Arm® Mbed Enabled™ • Ethernet • USB OTG FS on Micro‑AB connector • ST-LINK/V2-1 • Cryptography page 2/9 NUCLEO‑XXXXZX NUCLEO‑XXXXZX‑P NUCLEO‑XXXXZX‑Q Ordering information Order code Board reference User manual NUCLEO-F767ZI STM32F767ZIT6 MB1137 UM1974 NUCLEO-H743ZI(1) STM32H743ZIT6 NUCLEO-H723ZG NUCLEO-H743ZI2 STM32H723ZGT6 MB1364 UM2407 NUCLEO-H753ZI STM32H745ZIT6 MB1363 UM2408 NUCLEO-H7A3ZI-Q STM32L496ZGT6 NUCLEO-L496ZG-P NUCLEO-L4P5ZG NUCLEO-L4R5ZI DB3171 - Rev 14 STM32H755ZIT6 STM32H7A3ZIT6Q NUCLEO-L496ZG NUCLEO-L4A6ZG STM32H743ZIT6 STM32H753ZIT6 NUCLEO-H745ZI-Q NUCLEO-H755ZI-Q Target STM32 STM32L496ZGT6P MB1312 UM2179 STM32L4A6ZGT6 STM32L4P5ZGT6 STM32L4R5ZIT6 Differentiating features • Arm® Mbed Enabled™ • Ethernet • On-board USB OTG • USB OTG FS on Micro‑AB connector • ST-LINK/V2-1 • Arm® Mbed Enabled™ • Ethernet • USB OTG FS on Micro‑AB connector • ST-LINK/V2-1 • Ethernet • USB OTG FS on Micro‑AB connector • STLINK-V3E • Ethernet • USB OTG FS on Micro‑AB connector • STLINK-V3E • Ethernet • USB OTG FS on Micro‑AB connector • STLINK-V3E • Cryptography • Ethernet • USB OTG FS on Micro‑AB connector • STLINK-V3E • Internal SMPS • Ethernet • USB OTG FS on Micro‑AB connector • STLINK-V3E • Internal SMPS • Cryptography • USB OTG FS on Micro‑AB connector • STLINK-V3E • Internal SMPS • Arm® Mbed Enabled™ • USB OTG FS on Micro‑AB connector • ST-LINK/V2-1 • USB OTG FS on Micro‑AB connector • ST-LINK/V2-1 • External SMPS • USB OTG FS on Micro‑AB connector • ST-LINK/V2-1 • Cryptography • USB OTG FS on Micro‑AB connector • ST-LINK/V2-1 • Arm® Mbed Enabled™ • USB OTG FS on Micro‑AB connector • ST-LINK/V2-1 page 3/9 NUCLEO‑XXXXZX NUCLEO‑XXXXZX‑P NUCLEO‑XXXXZX‑Q Product marking Order code NUCLEO-L4R5ZI-P NUCLEO-L552ZE-Q NUCLEO-U575ZI-Q Board reference MB1312 MB1361 MB1549 User manual UM2179 UM2581 UM2861 Target STM32 STM32L4R5ZIT6P STM32L552ZET6Q STM32U575ZIT6Q Differentiating features • Arm® Mbed Enabled™ • USB OTG FS on Micro‑AB connector • ST-LINK/V2-1 • External SMPS • Device-only USB FS on USB Type-C® connector • ST-LINK/V2-1 • Internal SMPS • Device-only USB FS on USB Type-C® connector • STLINK-V3E • Internal SMPS 1. Replaced with NUCLEO-H743ZI2. 1.1 Product marking The stickers located on the top or bottom side of the PCB provide product information: • Product order code and product identification for the first sticker • Board reference with revision, and serial number for the second sticker On the first sticker, the first line provides the product order code, and the second line the product identification. On the second sticker, the first line has the following format: “MBxxxx-Variant-yzz”, where “MBxxxx” is the board reference, “Variant” (optional) identifies the mounting variant when several exist, "y" is the PCB revision and "zz" is the assembly revision, for example B01. The second line shows the board serial number used for traceability. Evaluation tools marked as “ES” or “E” are not yet qualified and therefore not ready to be used as reference design or in production. Any consequences deriving from such usage will not be at ST charge. In no event, ST will be liable for any customer usage of these engineering sample tools as reference designs or in production. “E” or “ES” marking examples of location: • On the targeted STM32 that is soldered on the board (For an illustration of STM32 marking, refer to the STM32 datasheet “Package information” paragraph at the www.st.com website). • Next to the evaluation tool ordering part number that is stuck or silk-screen printed on the board. Some boards feature a specific STM32 device version, which allows the operation of any bundled commercial stack/library available. This STM32 device shows a "U" marking option at the end of the standard part number and is not available for sales. In order to use the same commercial stack in his application, a developer may need to purchase a part number specific to this stack/library. The price of those part numbers includes the stack/library royalties. DB3171 - Rev 14 page 4/9 NUCLEO‑XXXXZX NUCLEO‑XXXXZX‑P NUCLEO‑XXXXZX‑Q Codification 1.2 Codification The codification composition is detailed in Table 2. Table 2. Codification explanation NUCLEO-XXYYZT NUCLEO-XXYYZT-P Description Example: NUCLEO-L496ZG-P NUCLEO-XXYYZT-Q XX MCU series in STM32 32-bit Arm Cortex MCUs STM32L4 Series YY MCU product line in the series STM32L496 STM32 package pin count 144 pins Z STM32 Flash memory size: T DB3171 - Rev 14 • E for 512 Kbytes • G for 1 Mbyte • H for 1.5 Mbytes • I for 2 Mbytes 1 Mbyte -P STM32 has external SMPS function External SMPS -Q STM32 has internal SMPS function - page 5/9 NUCLEO‑XXXXZX NUCLEO‑XXXXZX‑P NUCLEO‑XXXXZX‑Q Development environment 2 Development environment 2.1 System requirements Note: • Multi‑OS support: Windows® 10, Linux® 64-bit, or macOS® • USB Type-A or USB Type-C® to Micro-B cable macOS® is a trademark of Apple Inc. registered in the U.S. and other countries. Linux® is a registered trademark of Linus Torvalds. All other trademarks are the property of their respective owners. 2.2 Development toolchains • IAR Systems® - IAR Embedded Workbench®(1) • • Keil® - MDK-ARM(1) STMicroelectronics - STM32CubeIDE • Arm® - Mbed Studio(2) (3) 1. On Windows® only. 2. Arm and Mbed are registered trademarks or trademarks of Arm Limited (or its subsidiaries) in the US and or elsewhere. 3. Refer to the os.mbed.com website and to the “Ordering information” section to determine which order codes are supported. 2.3 Demonstration software The demonstration software, included in the STM32Cube MCU Package corresponding to the on-board microcontroller, is preloaded in the STM32 Flash memory for easy demonstration of the device peripherals in standalone mode. The latest versions of the demonstration source code and associated documentation can be downloaded from www.st.com. DB3171 - Rev 14 page 6/9 NUCLEO‑XXXXZX NUCLEO‑XXXXZX‑P NUCLEO‑XXXXZX‑Q Revision history Table 3. Document revision history Date Revision 15-Feb-2017 1 Changes Initial version. Document now scopes NUCLEO-L496ZG and NUCLEO-L496ZG-P products. Updated: 16-Mar-2017 2 • Cover page features (to cover LL APIs) • Cover page description • Table 2: Ordering information • Table 3: Codification explanation Document now also scopes NUCLEO-L4R5ZI product. Added Table 1: Device summary. Updated: 08-Aug-2017 30-Aug-2017 3 4 • Support of a wide choice of Integrated Development Environments (IDEs) including IAR™, Keil®, GCCbased IDEs • Cover page description • Table 2: Ordering information • Table 3: Codification explanation Updated Table 2: Ordering information. Document scope extended to the NUCLEO-F207ZG, NUCLEO-F303ZE, NUCLEO-F412ZG, NUCLEO-F413ZH, NUCLEO-F429ZI, NUCLEO-F446ZE, NUCLEO-F722ZE, NUCLEO-F746ZG, NUCLEO-F767ZI, and NUCLEOH743ZI products. 3-Nov-2017 5 Updated: • Features • Development toolchains • Table 1: Device summary • Table 2: Ordering information Document scope extended to the NUCLEO-L4A6ZG, NUCLEO-F439ZI and NUCLEO-F756ZG products. Updated: 15-Dec-2017 1-Feb-2018 6 7 • Features • System requirements • Table 1: Device summary • Table 2: Ordering information Document scope extended to the NUCLEO-L4R5ZI-P product: updated Table 1: Device summary and Table 2: Ordering information. Revised the entire document to accommodate to multiple feature combinations: 8-Apr-2019 8 • Reorganized Features • Updated Description • Added Ordering information and Development environment • Updated Table 1. List of available products and Table 2. Codification explanation Extended document scope to the NUCLEO-H743ZI2, NUCLEO-H745ZI-Q, NUCLEO-H753ZI, and NUCLEO-H755ZI-Q boards. DB3171 - Rev 14 18-Apr-2019 9 Extended document scope to the NUCLEO-L552ZE-Q board. 30-Oct-2019 10 Extended document scope to the NUCLEO-H7A3ZI-Q board. 26-Nov-2019 11 Extended document scope to the NUCLEO-L4P5ZG board. page 7/9 NUCLEO‑XXXXZX NUCLEO‑XXXXZX‑P NUCLEO‑XXXXZX‑Q DB3171 - Rev 14 Date Revision Changes 24-Mar-2020 12 Extended document scope to the NUCLEO-H723ZG board. 3-Apr-2020 13 Updated order code NUCLEO-H743ZI in List of available products. 24-Jun-2021 14 Extended document scope to the NUCLEO-U575ZI-Q board. Updated System requirements. page 8/9 NUCLEO‑XXXXZX NUCLEO‑XXXXZX‑P NUCLEO‑XXXXZX‑Q IMPORTANT NOTICE – PLEASE READ CAREFULLY STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgement. Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of Purchasers’ products. No license, express or implied, to any intellectual property right is granted by ST herein. Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product. ST and the ST logo are trademarks of ST. For additional information about ST trademarks, please refer to www.st.com/trademarks. All other product or service names are the property of their respective owners. Information in this document supersedes and replaces information previously supplied in any prior versions of this document. © 2021 STMicroelectronics – All rights reserved DB3171 - Rev 14 page 9/9