PD84006-E

PD84006-E RF power transistor, LdmoST plastic family N-channel enhancement-mode lateral MOSFETs Datasheet −production data Features ■ Excellent thermal stability ■ Common source configuration ■ Broadband performances: POUT = 6 W with 13 dB gain @ 870 MHz ■ Plastic package ■ ESD protection ■ In compliance with the 2002/95/EC European directive PowerSO-10RF (formed lead) Description The PD84006-E is a common source N-channel, enhancement-mode lateral field-effect RF power transistor. It is designed for high gain, broadband commercial and industrial applications. It operates at 7 V in common source mode at frequencies of up to 1 GHz boasts the excellent gain, linearity and reliability of ST’s latest LDMOS technology mounted in the first true SMD plastic RF power package, PowerSO-10RF ’s superior linearity performance makes it an ideal solution for portable radio and UHF RFID reader. The PowerSO-10 plastic package, designed to offer high reliability, is the first ST JEDEC approved, high power SMD package. It has been specially optimized for RF needs and offers excellent RF performances and ease of assembly. Table 1. Figure 1. Pin connections Source Drain Gate Device summary Order code Package Packaging PD84006-E PowerSO-10RF (formed lead) Tube May 2012 This is information on a product in full production. Doc ID 16087 Rev 2 1/11 www.st.com 11 Contents PD84006-E Contents 1 2 Electrical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 1.1 Maximum ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 1.2 Thermal data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2.1 Static . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2.2 Dynamic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2.3 ESD protection characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 3 Typical performances . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 4 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 5 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 2/11 Doc ID 16087 Rev 2 PD84006-E Electrical data 1 Electrical data 1.1 Maximum ratings (TCASE = 25 °C) Table 2. Absolute maximum ratings Symbol Value Unit V(BR)DSS Drain-source voltage 25 V VGS Gate-source voltage -0.5 to +15 V Drain current 5 A Power dissipation (@ TC = 70 °C) 59 W Max. operating junction temperature 165 °C -65 to +150 °C Value Unit 1.6 °C/W ID PDISS TJ TSTG 1.2 Parameter Storage temperature Thermal data Table 3. Symbol RthJC Thermal data Parameter Junction - case thermal resistance Doc ID 16087 Rev 2 3/11 Electrical characteristics 2 PD84006-E Electrical characteristics TCASE = +25 °C 2.1 Static Table 4. Static Symbol 2.2 Test conditions Min Unit VGS = 0V VDS = 25 V 1 µA IGSS VGS = 5 V VDS = 0 V 1 µA VGS(Q) VDS = 10 V ID = 150 mA 4.3 V VDS(ON) VGS = 10 V ID = 1 A CISS VGS = 0V VDS = 7 V COSS VGS = 0V CRSS VGS = 0V 3.0 0.34 V f = 1 MHz 40 pF VDS = 7 V f = 1 MHz 33 pF VDS = 7 V f = 1 MHz 1.45 pF Dynamic Symbol P3dB Dynamic Test conditions VDD = 7.5 V, IDQ = 150 mA f = 870 MHz Min Typ 5 6 GP VDD = 7.5 V, IDQ = 150 mA, POUT = 2 W, f = 870 MHz 15 hD VDD = 7.5 V, IDQ = 150 mA, POUT = P3dB, f = 870 MHz 50 Load VDD = 9.5 V, IDQ = 150 mA, POUT = 8 W, f = 870 MHz mismatch All phase angles 20:1 Max Unit W dB 60 % VSWR ESD protection characteristics Table 6. 4/11 Max IDSS Table 5. 2.3 Typ ESD protection characteristics Test conditions Class Human body model 2 Machine model M3 Doc ID 16087 Rev 2 PD84006-E Typical performances Figure 2. Output power and efficiency vs. frequency Vdd = 7.2 V, Idq = 200 mA, Pin = 24 dBm Figure 3. Gain vs. output power Vdd = 7.2 V, Idq = 200 mA Figure 4. Input return loss vs. frequency Vdd = 7.2 V, Idq = 200 mA Figure 5. Harmonics vs. frequency Vdd = 7.2 V, Idq = 200 mA, Pin = 24 dBm 0 0 -1 -10 Harmonics (dB) IRL (dB) -20 Pin=24 dBm -2 -3 -4 -5 -7 740 H2 -30 H3 -40 -50 -60 -6 -70 760 780 800 820 840 860 880 900 920 940 960 Frequency (MHz) Figure 6. -80 740 760 780 800 820 840 860 880 900 920 940 960 Frequency (MHz) Output power vs. frequency and supply voltage Pin = 24 dBm, Idq = 200 mA 8 Vcc=5V 7 Output Power (W) 3 Typical performances Vcc=6V Vcc=7.2V Vcc=9V 6 5 4 3 2 1 740 760 780 800 820 840 860 880 900 920 940 960 Frequency (MHz) Doc ID 16087 Rev 2 5/11 Package mechanical data 4 PD84006-E Package mechanical data In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK® is an ST trademark. 6/11 Doc ID 16087 Rev 2 PD84006-E Package mechanical data Table 7. PowerSO-10RF formed lead (gull wing) mechanical data Dim. mm. Min Typ Max Min Typ Max A1 0 0.05 A2 3.4 3.5 0.1 0. 0.0019 0.0038 3.6 0.134 0.137 0.142 A3 1.2 1.3 1.4 0.046 0.05 0.054 A4 0.15 0.2 0.25 0.005 0.007 0.009 b 5.4 5.53 5.65 0.212 0.217 0.221 c 0.23 0.27 0.32 0.008 0.01 0.012 D 9.4 9.5 9.6 0.370 0.374 0.377 a 0.2 0.007 D1 7.4 7.5 7.6 0.290 0.295 0.298 E 13.85 14.1 14.35 0.544 0.555 0.565 E1 9.3 9.4 9.5 0.365 0.37 0.375 E2 7.3 7.4 7.5 0.286 0.292 0.294 E3 5.9 6.1 6.3 0.231 0.24 0.247 F 0.5 0.019 G 1.2 0.047 L 0.8 1 R1 T 1.1 0.030 0.039 0.25 R2 Note: Inch. 0.01 0.8 2 deg 5 deg 0.042 0.031 8 deg 2 deg 5 deg T1 6 deg 6 deg T2 10 deg 10 deg 8 deg Resin protrusions not included (max value: 0.15 mm per side) Doc ID 16087 Rev 2 7/11 Package mechanical data Figure 7. PD84006-E Package dimensions Critical dimensions: - Stand-off (A1) - Overall width (L) 8/11 Doc ID 16087 Rev 2 PD84006-E Package mechanical data Figure 8. Tube information Doc ID 16087 Rev 2 9/11 Revision history 5 PD84006-E Revision history Table 8. 10/11 Document revision history Date Revision Changes 07-Aug-2009 1 Initial release. 23-May-2012 2 Updated VGS(Q) in Table 4: Static. Doc ID 16087 Rev 2 PD84006-E Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST’s terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY TWO AUTHORIZED ST REPRESENTATIVES, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. © 2012 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com Doc ID 16087 Rev 2 11/11